IFB_32-12-6536_Addendum_1.pdf
PDF 193 KB Posted
- Solicitation number
- 32-12-6536
- Issued by
- Sacramento County, Sacramento City, California
About this file
This document is an Addendum to an Invitation for Bids (IFB) issued by the California Department of Transportation, Division of Equipment for the procurement of 16 Roll-Off Lift Frames and Ancillary Parts for Landscape Body 3-axle trucks. The solicitation is governed by State of California Specification 04913-445-241 and associated drawings. The Addendum provides clarification on the primer requirements, stating that all surfaces except pins, pinholes, cylinder rods, and cutting blades must be primed with a lead-free primer to a minimum of 2 mils dry film thickness.
The contract opportunity is a one-time acquisition for the jurisdictions of Sacramento County and Sacramento City. The bid due date is 04/04/2024. The document does not provide information on pricing terms, set-asides, incumbents, funding requirements, or other salient details beyond the primer clarification.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IFB_32-12-6536_Solicitation.pdf | ||
| 6536_Drawings_PE_32-12-6536_(Pg_1-55).pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of California
California Department of Transportation - Division of Equipment
IFB ADDENDUM
BID DUE DATE SOLICITATION NO.
IFB 32-12-6536
DATE REQUISITION NO
04/04/2024 03/20/2024 322410000052
THIS IFB ADDENDUM MUST BE INCLUDED WITH SUBMITTED BID
FAILURE TO RETURN THIS FORM MAY BE CAUSE FOR BID REJECTION
ADDENDUM # 1
QUESTIONS AND ANSWERS
QUESTION 1:
Weldable primer is required on 085713 (note 9) but is not called out on 076067-is it required on all parts or only the parts with the note?
ANSWER 1:
In the absence of a drawing note, refer to Technical Specification 04913-445-241T - Section 8 - Coatings, Primer.
8. COATINGS
Primer:
All surfaces except pins, pinholes, cylinder rods, and cutting blades, shall be painted with lead-free primer. All surfaces to be primed shall be prepared in accordance with the primer manufacturer's recommendations to provide maximum primer adhesion. Unless otherwise noted, all metal surfaces shall be primer painted with Amteco, Inc., Zero Rust Primer, Grey or Black color, not less than 2 mils dry film thickness. The primer coat shall be free from runs, drips, sags, etc., and shall be evenly applied.
Any metal surface that is not completely coated with primer (i.e.-overlapping surfaces joined by non-continuous welds, sheet metal spot welded to reinforcing ribs, etc.) shall be treated with a weld-through primer product prior to welding (Ref: SEM #40793 Copperweld, or SEM #40773 Zincweld).
ALL OTHER TERMS AND CONDITIONS SHALL REMAIN IN FULL
FORCE AND EFFECT IN ACCORDANCE WITH ORIGINAL IFB
DATED 03/04/2024
| BID DUE DATE |
| 04/04/2024 |
File details come from the government source that posted it. Updated .