6536_Drawings_PE_32-12-6536_(Pg_1-55).pdf
PDF 4 MB Posted
- Solicitation number
- 32-12-6536
- Issued by
- Sacramento County, Sacramento City, California
About this file
This document is a solicitation issued by the California Department of Transportation (Caltrans), Division of Equipment, for the acquisition of sixteen (16) Roll-Off Lift Frames and Ancillary Parts for Landscape Body 3 axle trucks. The solicitation is conducted in accordance with State of California Specification 04913-445-241 and the included technical drawings. The parts are to be supplied for use in Sacramento County and the City of Sacramento.
The solicitation does not provide specific response or award dates. However, it does outline detailed technical specifications and requirements for the lift frames and ancillary components. Pricing terms, funding sources, and set-aside information are not included in the document. The contract term and any renewal options are also not specified.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| IFB_32-12-6536_Addendum_1.pdf | ||
| IFB_32-12-6536_Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UNLESS OTHERWISE SPECIFIED:
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE 1.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND7.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
BILL OF MATERIALS
EQUIPMENT, OFFICE OF ENGINEERING AND
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
ASSEMBLY
E
F
R E V
F
D
SHEET 1 OF 3
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:24
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
10 YARD LIFT-FRAME - LANDSCAPE
076063
DESIGNER
DEPARTMENT OF TRANSPORTATION
MAIN-COMPONENTS SUB-
N O N E
NONE
Manuel Herrera
FINISH
PRODUCTION.
CONFIDENTIAL AND PROPRIETARY
DRAWN
4108.29 LBS
.03"
MATERIAL
.005"
INTERPRET GEOMETRIC
TWO PLACE DECIMAL
ANSI Y14.5-2009TOLERANCING PER:
THREE PLACE DECIMAL
WEIGHT
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2018 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
Meta Data =
07/13/2022
REV. DESCRIPTION DATE APPROVED
REVISIONS
NONE PRELIMINARY 02/24/2022 MANUEL HERRERA
ITEM
NO.
QTY. DESCRIPTION SUPPLIER/MFG PART
NO.
CALTRANS PART
NO.
1 1 HINGE ASSEMBLY, 10 YD ROLL-OFF DUMP BODY
08-001171 (CT STK #
684-5015)
2 1 LANDSCAPE ROLL-OFF LIFT FRAME ASSEMBLY 076066 (CT STK #
684-4000 )
3 REF
WINCH, LIFT-SAFE® SERIES LS16K, GEAR RATIO =
25:1, GALVANIZED DRUM, HYDRAULIC PARTS
CLOCKED PER BLOOM DWG# 6544
BLOOM MFG MODEL
# LS16K-18.6M-S145-
RH-25-GALV-6544
CT STK # 688-1380
4 1 HOIST-MOUNT AND SAFETY LEG ASSEMBLY, 10 YD
DUMP, ROLL-OFF BODY
08-001126 (CT STK #
051-3517)
5 (12)
SAE FLAT WASHER, 5/8" SCREW SIZE, 0.656" ID,
1.312" OD, THICKNESS = 0.074"-0.121", STEEL,
GRADE 8, ZINC YELLOW-CHROMATE PLATED
McMASTER-CARR
PART # 98023A035
6 (6) 5/8-11 GRADE 8 HSS NYLON-INSERT LOCKNUT McMASTER-CARR 97135A270
7 (4) HEX HEAD CAP SCREW, 5/8"-11 UNC-2A x 3-3/4"
LONG, PARTIALLY THREADED, ALLOY STEEL, GRADE
8, ZINC YELLOW-CHROMATE PLATED
8 (2) HEX HEAD CAP SCREW, 5/8"-11 UNC-2A x 3-1/2"
LONG, PARTIALLY THREADED, ALLOY STEEL, GRADE
8, ZINC YELLOW-CHROMATE PLATED
9 REF
G3 TELESCOPIC CYLINDER, 150-1/4" STROKE, SAE-
16 PORT, STAGE-1 WITH 5.793" EFFECTIVE DIA., 472
LBS WEIGHT WITHOUT OIL, 2,750 PSI WORKING
PRESSURE, 13.8 GAL. HYDRAULIC FLUID VOLUME,
4O GPM MAX PUMP FLOW
MAILHOT MODEL #
G3 150-5.7-4 - PART #
PG0571504VM0148
065-4611
10 1
12 GA. (0.1054" NOM THK) SHEET, DRY, LASER
QUALITY, FINISH 2B, 304 STAINLESS STEEL PER ASTM
A240
08-001437
11 2
FLAT WASHER 1/4" SCREW SIZE, 5/8" OD, .05"-.08"
THICK, 18-8 STAINLESS STEEL, SAE TYPE A
12 2 FLAT HEAD SOCKET CAP SCREW, 1/4"-20 UNC-2A x
1-1/8" LONG, FULLY THREADED, 82° COUNTERSINK
ANGLE, PASSIVATED 18-8 STAINLESS STEEL
13 2 LOCKNUT, NYLON-INSERT, 1/4"-20 UNC-2B, STEEL,
GRADE 5, ZINC-YELLOW CHROMATE PLATED
NOT INCLUDED IN
CT STK # 684-4005
C T S
TK
-4
P E R D R A W
IN
G C O M P R
IS
E D O F C O M P O N E N
TS
C T S
TK
-4 -0 C T S
TK
-3
-0 C T S
TK
-5 A N D -0
SEE DRAWING 08-001437
NOT INCLUDED IN
CT STK # 684-4005
SEE DRAWING 08-001171
SEE DRAWING 076066
SEE DRAWING 08-001126
(12) REF
(4)X
122X
SCALE 1 : 8
AND WITHOUT WINCH MOUNTING HARDWARE
2X 11
2X 13
REF3
(6) REF
CALTRANS STOCK # 684-4005 IS TO BE SUPPLIED WITHOUT TELESCOPING CYLINDER (ITEM 9), WITHOUT WINCH (ITEM 3), CALTRANS CAD MODEL # 076063 (CT STK # 684-4005)
SUB-ASSEMBLY OF 10 YARD LIFT-FRAME COMPONENTS
(2) REF8
9 REF
PE 32-12-6536 - Page 1 of 55
2X 12" .9°
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 2 OF 3
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:4
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER: ANSI Y14.5-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
TWO PLACE DECIMAL .03"
THREE PLACE DECIMAL .005"
CONFIDENTIAL AND PROPRIETARY
© COPYRIGHT 2018 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
4108.29 LBS
7/20/2022
MAIN-COMPONENTS SUB-
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YARD LIFT-FRAME - LANDSCAPE
076063
WEIGHT
Meta Data =
2 REF
SCALE 1 : 10
CALTRANS CAD MODEL # 076063 (CT STK # 684-4005)
SHOWN WHEN LIFT-FRAME IS RESTING OVER TRUCK'S FRAME RAILS
RELATIVE PLACEMENT OF EXTENDED 10 YARD LIFT-FRAME SUB-ASSEMBLY
MOUNTS DIRECTLY OVER
TRUCK'S FRAME RAILS
REF 4
1 REF
64"
64" 63
8"
2 REF
SECTION C-C
1 REF
4 REF
HOIST SHOWN MOUNTED FOR REF ONLY
SECTION B-B
2 REF
8.755"
(7.625 .125" IF HOIST
WERE TO BE
FULLY CLOSED
REF3
SECTION A-A
1 : 4.25 SCALE
SHOWN FOR REF ONLY
WINCH SHOWN MOUNTED TO LIFT-FRAME
(4)X
(8)X 5
(4)X 6
(2)X
(4)X5
6 (2)X
2 REF
2 REF
1 REF
3 REF4 REF
SEE SHT 3SEE SHT 3
C
C
DD
B
B
A
A
PE 32-12-6536 - Page 2 of 55
15758"
FULLY EXTENDED CYLINDER
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 3 OF 3
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:32
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2018 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
4108.29 LBS
7/20/2022
MAIN-COMPONENTS SUB-
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YARD LIFT-FRAME - LANDSCAPE
076063
WEIGHT
Meta Data =
SCALE 1 : 5
SECTION F-F
112X
SCALE 1 : 1
DETAIL E
122X
REF
132X
2"
2"
2X 516"
2X 1764" 12"
916" X 82.00°
SCALE 1 : 9
SECTION D-D
FROM SHT 2
F
F
REF
REF9
REF 4
REF
RELATIVE PLACEMENT OF 10 YARD LIFT-FRAME COMPONENTS SUB-ASSEMBLY
SHOWN WHEN MAILHOT CYLINDER IS FULLY EXTENDED
CALTRANS CAD MODEL # 076063 (CT STK # 684-4005)
SCALE 1 : 10.5
8"
64"
47.4°
11 REF
SCALE 1 : 1.5
DETAIL G
REF
REF
13 REF
PE 32-12-6536 - Page 3 of 55
LABELS MAY BE PERMANENTLY FASTENED IN LIEU OF ADHESIVE-BOND.
UNLESS OTHERWISE SPECIFIED:
REMOVE ALL BURRS AND SHARP EDGES. ALL METAL PARTS SHALL BE 1.
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS FROM3.
METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL BE CLEAN,
AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING TO
AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE, WARPING,
AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE SPECIFIED.6.
SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE THICKNESS OF THE
THINNER OF THE ADJOINING PARTS. WELDS TO BE UNIFORM AND NEAT
IN APPEARANCE IN ACCORDANCE WITH INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND SEAMS7.
NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV RESISTANT,
WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
MANUFACTURER SHALL AFFIX PERMANENT-ADHESIVE-BACK LABEL,
OR METAL STAMP WITH THE FOLLOWING INFORMATION:
MANUFACTURER ____________
SERIAL NUMBER __________
PE NUMBER (formatted as PE 32-12-YYYY or PE YYYY)
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 1 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
WEIGHT
TWO PLACE DECIMAL
MATERIAL
076066
LIFT FRAME
PRODUCTION.
STATE OF CALIFORNIA
DIVISION OF EQUIPMENT
EQUIPMENT, OFFICE OF ENGINEERING AND
ASSEMBLY
INTERPRET GEOMETRIC
7/14/2022
1194.35 LBS
CONFIDENTIAL AND PROPRIETARY
Manuel Herrera
BILL OF MATERIALS
.03"
.005"
ANSI Y14.5-2009
THREE PLACE DECIMAL
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL "
ANGULAR BEND ½
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
Meta Data =
24X
2X
SCALE 1 : 7
CALTRANS CAD MODEL #076066 (CT STK # 684-4000 )
2X
12X
4X3
2X
2X
8 8X
7 4X
6 12X
5 12X
8 8X
6 8X
5 8X
14 16X
12 32X
13 16X
14 12X
ASSEMBLY
SCALE 1:2
REF
DETAIL DE
2X
10 2X
2X
15 REF
REV. DESCRIPTION DATE APPROVED
REVISIONS
1 ADDED CT STK # 684-4000 TO DRAWING 2/11/2022 Manuel Herrera
NONE PRELIMINARY 01/20/2022 Manuel Herrera
SEE SHT 6
SEE SHT 4 & 5
SEE SHT 4 & 5
SEE SHT 7
SEE SHT 7
SEE SHT 7
SEE SHT 7
C T S
TK
-4
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS
PART NO.
1 1 WELDMENT, LANDSCAPE ROLL-OFF LIFT-FRAME 076067
2 2 3/4" THICK x 5.00" WIDE ULTRA HIGH MOLECULAR
WEIGHT POLYETHYLENE (UHMW PE) BAR, UV
STABILIZED
076086
3 4 3/4" THICK x 5.00" WIDE ULTRA HIGH MOLECULAR
WEIGHT POLYETHYLENE (UHMW PE) BAR, UV
STABILIZED
10-000210
4 2
3/8” THICK ULTRA HIGH MOLECULAR WEIGHT
POLYETHYLENE (UHMW PE), UV STABILIZED
08-001283
5 20
1/4-20 THREAD, LOCKNUT, STAINLESS STEEL WITH
NYLON INSERT
McMASTER-
CARR
90715A125
6 20
FLAT WASHER, 1/4" SCREW SIZE, 0.281" ID, 0.625"
OD, 0.043"-0.057" THK, 316 STAINLESS STEEL
McMASTER-
CARR
90107A029
7 4 BUTTON HEAD CAP SCREW, 1/4"-20 UNC-3A x 1-
1/8" LONG, FULLY THREADED, 18-8 STAINLESS
STEEL
McMASTER-
CARR PART #
92949A835
8 16 BUTTON HEAD CAP SCREW, 1/4"-20 UNC-3A x 1-
1/4" LONG, 18-8 STAINLESS STEEL
McMASTER-
CARR
92949A544
9 2
LOCKING PIN WITH WIRE RETAINER, SQUARED,
3/8" DIAMETER, 1-7/8" USABLE LENGTH, ZINC-
PLATED STEEL
McMASTER-
CARR PART #
98416A018
10 2
LANYARD COMPRISED OF 1/8" DIA. WIRE ROPE, 7
X 19 STRAND CORE, 18-8 STAINLESS STEEL, AND
TWO STAINLESS STEEL COMPRESSION SLEEVES
McMASTER-
CARR PART #
8908T44 (24"
LONG),
McMASTER-
CARR PART #
3755T15 (2
EACH)
08-001169
11 2
LANYARD COMPRISED OF 1/8" DIA. WIRE ROPE, 7
X 19 STRAND CORE, 18-8 STAINLESS STEEL, AND
TWO STAINLESS STEEL COMPRESSION SLEEVES
McMASTER-
CARR PART #
8908T44 (24"
LONG),
McMASTER-
CARR PART #
3755T15 (2
EACH)
08-001150
12 56
FLAT WASHER, SAE, 5/16" SCREW SIZE, 0.344" ID,
0.688" OD, ALLOY STEEL, GRADE 8, ZINC YELLOW-
CHROMATE PLATED
13 28
HEX LOCKNUT, NYLON-INSERT, 5/16"-18 UNC-2B,
1/2" W, 11/32" H, STEEL, GRADE 8, ZINC YELLOW-
CHROMATE PLATED
14 28 HEX HEAD CAP SCREW, 5/16"-18 UNC-2A x 1-3/8"
LONG, PARTIALLY THREADED, ALLOY STEEL,
GRADE 8, ZINC YELLOW-CHROMATE PLATED
15 2
3/8" THICK UHMW IPX 2000, INTERSTATE PLASTICS
UV STABILIZED
- 04-000220
16 2 LOCK PIN ASSEMBLY - 08-001146
SEE DRAWING 076067
1 : 5.5 SCALE
PE 32-12-6536 - Page 4 of 55
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 2 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:24
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
1194.35 LBS
7/14/2022
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT FRAME
076066
WEIGHT
Meta Data =
REF
6 REF
4 2X
REF
16X
20X6
5 20X
SCALE 1 : 8
TOP ASSEMBLY - PARTIAL EXPLODED VIEW
2X 15 8
DETAIL B
SCALE 3 : 8
2 PLACES
2X
10 2X
2X 11
162X
1328X
SCALE 3 : 8
24 PLACES
DETAIL A
28X14
56X12
12 REF
PE 32-12-6536 - Page 5 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 3 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:24
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
1194.35 LBS
7/14/2022
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT FRAME
076066
WEIGHT
Meta Data =
1 REF
SCALE 2 : 5.5
DETAIL DF
2 REF
1878"
3 REF3 REF2 REF
4 REF
SEE SHT 4
SEE SHT 4
SEE SHT 4
SEE SHT 4
SEE SHT 5
SEE SHT 6SEE SHT 6
Q
DF
H
H
G
G
UU
C
C
L
L
REF
SCALE 1 : 3
SECTION G-G
4 REF
REF
SCALE 1 : 3
SECTION C-C
3 REF
REF3
26"
REF
4 PLACES AS SHOWN
SCALE 1.5 : 1
DETAIL O
6 REF
5 REF
118"
1 REF
SCALE 1.5 : 1
28 PLACES
DETAIL D
REF
REF 12
REF 13
3 (ALSO ITEM 4) REF
138"
PE 32-12-6536 - Page 6 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 4 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
1194.35 LBS
7/14/2022
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT FRAME
076066
WEIGHT
Meta Data =
REF
SCALE 2 : 1
8 PLACES
DETAIL J
REF
REF 6
4 REF
114"
REF
SCALE 1 : 2
FROM SHT 3
SECTION H-H
REF
REF
SCALE 1 : 4
FROM SHT 3
SECTION L-L
REF
REF
10 REF
9 11
REF
SCALE 2 : 1
8 PLACES
DETAIL M
REF
REF 6
15 REF
114"
SCALE 1.5 : 1
2 PLACES
DETAIL T
REF1
SECURE ITEM 10 & 11 LANYARDS
TO WELD EYE IN ITEM 1 AS SHOWN,
THEN CRIMP COMPRESSION SLEEVES PER
MANUFACTURER'S INSTRUCTIONS
USING APPROPRIATE COMPRESSION TOOL
PE 32-12-6536 - Page 7 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 5 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
1194.35 LBS
7/14/2022
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT FRAME
076066
WEIGHT
Meta Data =
SECURE ITEM 16 AS SHOWN WITH
USING APPROPRIATE COMPRESSION TOOL
SCALE 1.25 : 1
FROM SHT 3
DETAIL Q
ITEM 10 (WIRE ROPE), THEN CRIMP COMPRESSION
SLEEVE PER MANUFACTURER'S INSTRUCTIONS
REF 16
REF 10
REF1
REF
USING APPROPRIATE COMPRESSION TOOL
MANUFACTURER'S INSTRUCTIONS
THEN CRIMP COMPRESSION SLEEVE PER
SECURE ITEM 9 AS SHOWN WITH ITEM 11 (WIRE ROPE),
9 REF
2X 212"
PE 32-12-6536 - Page 8 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 6 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
1194.35 LBS
7/14/2022
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT FRAME
076066
WEIGHT
Meta Data =
SECTION V-V
SCALE 1 : 1
12" STK
REF103
ITEM 103
CALTRANS CAD MODEL # 08-001148
SCALE 1 : 1
3164"
2"
2X R34"
14" STK
2X R12"
ITEM 101 - FLAT PATTERN
CALTRANS CAD MODEL # 08-001147
SCALE 1 : 1
3.750
2.500
12"
UP 90.0° R 1/2"
UP 90.0° R 1/2"
ITEM 103 - FLAT PATTERN
CALTRANS CAD MODEL # 08-001148
SCALE 1 : 1
1.707 1.707
5.840 12"
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
101 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001147
102 1 1½” x 1½” HOT ROLLED SQUARE, DESCALED & OILED, STRUCTURAL QUALITY A36 STEEL PER ASTM A36
08-001149
103 1
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001148
16 REF
SCALE 3 : 16
FROM SHT 3
VIEW U-U
16 REF
1312"
1012"
ITEM 101
CALTRANS CAD MODEL # 08-001147
SCALE 1 : 1
334"
212"
2X R12"
13364"
13364"
3164"
VV
SCALE 1 : 1
CALTRANS CAD MODEL # 08-001149
ITEM 102
102 REF
112" STK
112" STK
538"
12"
14"
438"
2"
34"
SCALE 1 : 1
CALTRANS CAD MODEL # 08-001146
ITEM 16
2 PLACES
TIE ENDS
1/8"
1/8"
PE 32-12-6536 - Page 9 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 7 OF 7
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:6
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
BILL OF MATERIALS
Manuel Herrera
1194.35 LBS
7/14/2022
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT FRAME
076066
WEIGHT
Meta Data =
ITEM 4
CALTRANS CAD MODEL # 08-001283
SCALE 1 : 1
9"
4"
3X 234"
3X 58"
2X 58" 2X 434"
2X 7"
4X 1764" THRU
1532" 64"
2X 1764" THRU
1532" 64"
3"
KK
SECTION N-N
SCALE 1 : 1
8"
64"
45.0°
18"
SCALE 1 : 1
CALTRANS CAD MODEL # 04-000220
ITEM 15
15 REF
2X 58" 2X 434"
2X 234"
4"
6"
4X 1764" THRU ALL
916" 64"
2X 58"
NN
SCALE 1 : 1
SECTION K-K
4 REF
38" STK 3.6°
316"
1764" 1164"
ITEM 2
CALTRANS CAD MODEL # 076086
SCALE 1 : 3
34" STK
2X 38"+- 1/32" 0"
2X 45.0°
6X 41564"
6X 1132" THRU ALL
1316" 64"
5"
1516"
10" 20"
30"
40"
50"
5178" E
E
ITEM 3
CALTRANS CAD MODEL # 10-000210
SCALE 1 : 3
2X 38"
2X 45.0°
34" STK
SCALE 1 : 3
SECTION F-F
3 REF
2" X 45.0°
4X 2164"+- 1/32" 0"
53"
1" 17"
34"
51"
4X 41564" 5"
4X 1132" THRU ALL
1316" 64"
F
F
SCALE 1 : 3
SECTION E-E
2 REF
2" X 45.0°
14"
6X 2164"+- 1/32" 0"
PE 32-12-6536 - Page 10 of 55
DEBURRED TO ENSURE THEY ARE SAFE FOR HANDLING.
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY
STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE,
WARPING, AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE 6.
SPECIFIED. SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE
THICKNESS OF THE THINNER OF THE ADJOINING PARTS. WELDS TO BE
UNIFORM AND NEAT IN APPEARANCE IN ACCORDANCE WITH
INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND 7.
SEAMS NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV
RESISTANT, WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
INSPECTION DIMENSIONS ARE ENCLOSED BY THE SYMBOL 8.
2X18
2X
2X
SEE SHT 13
2X
2X10
2X
142X
2X
2X
2X
2X27
11 8X
2X
SCALE 1 : 8
WELDMENT - ISOMETRIC VIEW
CALTRANS CAD MODEL # 076067
RE
AR
O F C
AB
34 4X
8X
REV. DESCRIPTION DATE APPROVED
REVISIONS
NONE PRELIMINARY 01/18/2022 Manuel Herrera
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
1 1 L8 x 4 x ½” L-ANGLE, STRUCTURAL A36 STEEL PER ASTM A36
076079
2 1 L8 x 4 x ½” L-ANGLE, STRUCTURAL A36 STEEL PER ASTM A36
076080
3 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000184
4 2
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000185
5 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000187
6 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001278
7 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000188
8 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000189
9 2
3/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000190
10 2 PILLOW BLOCK TRUNION MOUNT ASSEMBLY 10-000200
11 8
5/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000193
12 2
3/16" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001275
13 1 1/2" THK PLATE, HARDOX 450 WEAR PLATE 08-001274
14 2 8” x 3” x ¼” WALL RECTANGULAR TUBE, STRUCTURAL
STEEL PER ASTM A500, GRADE B
10-000194
15 2
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000195
16 1
3/16" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000196
17 2
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000197
18 2
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
10-000198
19 1 BODY STOP & LOCK WELDMENT, CURB-SIDE 085715
20 1 L4x3x1/2" ANGLE, STRUCTURAL, A36 STEEL PER ASTM A36
08-001246
21 1 L4x4x1/2" ANGLE, STRUCTURAL, A36 STEEL PER ASTM A36
08-001247
22 1
WELDMENT COMPRISED OF ITEMS 08-001095 AND 08-
001106
08-001105
23 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001248
24 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001249
25 1 1/2" THK PLATE, HARDOX 450 WEAR PLATE 08-001277
26 2
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
076081
27 2
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001281
28 1 C4x7.5 STANDARD C-CHANNEL (4" DPTH x 7.5 LBS/Ft)
STEEL, GRADE 50 PER ASTM A572
08-001284
29 1
3/16" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001285
30 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001302
31 1
1/2" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001311
32 2
3/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001315
33 8
1/4" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
- 04-000213
34 4
3/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
- 04-000218
SEE SEPARATE
DRAWING 10-000200
SEE SEPARATE
DRAWING 085715
SEE SEPARATE
DRAWING 085713 SEE SHT 8
SEE SHT 9
SEE SHT 10
SEE SHT 11
SEE SHT 12
SEE SHT 13
SEE SHT 15
SEE SHT 14
SEE SHT 12
SEE SHT 16
SEE SHT 17
SEE SHT 14
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
35 2
3/16" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
- 04-000221
36 1 BODY STOP & LOCK WELDMENT, ROAD-SIDE 085713
SEE SHT 14
BILL OF MATERIALS
R E V
EQUIPMENT, OFFICE OF ENGINEERING AND
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
CONFIDENTIAL AND PROPRIETARY
F
E
F
E
D
SHEET 1 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE STATE OF CALIFORNIA
DIVISION OF EQUIPMENT
LIFT-FRAME
ENG APPR.
WELDMENT
N O N E
PRODUCTION.1140.61 LBS
NONE
.03"
DRAWN Manuel Herrera
DESIGNER
7/19/2022
FINISH
ANSI Y14.5-2009
INTERPRET GEOMETRIC
.005"
WEIGHT
MATERIAL
TWO PLACE DECIMAL
THREE PLACE DECIMAL
TOLERANCING PER:
076067
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
Meta Data = PE 32-12-6536 - Page 11 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 2 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
352X
SCALE 1 : 10
CALTRANS CAD MODEL # 076067
SHOWN FOR REF ONLY
WELDMENT - EXPLODED VIEW
2X10
2X 4
2X
2X
2X 15
2X 14
2X 18
2X
2X27
2X
2X
8X 33
4X34
11 8X
PE 32-12-6536 - Page 12 of 55
0"
62"
X
X
3X 21 2"
8"
4X 141 2"+-
1/4" 0"
8"
X
X
X
X
X
X "+ -1
/3
X "+ -0
/3
X "+ -1
/3
X
(38" MAX)
WELD PROFILE
38" MAX
4"
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 3 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
19 REF
4 REF
2 REF
14 REF
SEE SHT 5
SEE SHT 5
SEE SHT 6
SEE SHT 6
31 REF
SEE SHT 4 3 REF
0.250
COPLANAR ITEM 1 & ITEM 2 SURFACES
B
TIE ENDS
AS SHOWN &
OPPOSITE SIDE
AS SHOWN &
OPPOSITE SIDE
TIE ENDS
2 PLACES 2X 58"+-
1/32" 0"
2X 58"+- 1/32" 0"
2X 91 32"
Z
Z
L
L
SCALE 2 : 7
2 PLACES
ON THESE SIDES
TIE ENDS
DO NOT WELD
DETAIL C
REF 35
REF34
TIE ENDS
TIE ENDS TIE ENDS
17 REF
16 REF
18 REF
SEE SHT 4
SEE SHT 4
2 REF
SEE SHT 5SEE SHT 5
11 REF11 REF
26 REF
11 REF
11 REF 27 REF
14 REF 17 REF
15 REF
15 REF
14 REF
19 REF
11 REF
11 REF
36 REF
12 REF
13 REF
25 REF
12 REF
SEE SHT 6
SEE SHT 6
32 REF
31 REF
30 REF
SEE SHT 4
33 REF
27 REF
1 REF
TIE ENDS
2 PLACES
2"+-
1/32" 0"
18"
2"
32"
64"
16"
64"
2X 11 4"
AC
AC
AE
AE
BB
A
A
TIE ENDS
SCALE 2 : 7
2 PLACES
DETAIL D
ON THIS SIDE
REF
DO NOT WELD
TIE ENDS
TIE ENDS
DETAIL 2 PLACES
DETAIL F
SCALE 1 : 1
2 PLACES
REF 25
REF14
REF2
REF12
REF 31
REF27
WRAP AROUND
TIE ENDS
WRAP AROUND END
3/8" MAX 2 PLACES
BLENDED WITH LOWER WELD
2 PLACES
TIE ENDS
WRAP AROUND
TIE ENDS
316"
18"
2X 12"
PE 32-12-6536 - Page 13 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 4 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
27 REF
DETAIL Y
SCALE 1 : 1
2 PLACES
REF 1
4 - 6
2 - 6
DETAIL 2 PLACES
TIE ENDS
DETAIL 2 PLACES
SCALE 1 : 2
FROM SHT 3
MECHANICAL STRAIGHTENING PERMISSIBLE TO CONFORM TO GEOMETRIC TOLERANCES
SECTION A-A
REF16
REF17
REF14
REF 18
REF 17
REF 14
REF 2
REF1
REF 18
WRAP AROUND ENDS
M A0.250"
B
A
DETAIL 2 PLACES
WRAP AROUND
DETAIL 2 PLACES
WRAP AROUND
DETAIL 2 PLACES
WRAP AROUND
TIE ENDS
2 PLACES
14" TYP
26"±1 8"
6X 51 2"
4" 3"
27"
BLEND WITH CONTOUR
2 PLACES
SCALE 1 : 4
ISOMETRIC VIEW OF SECTION A-A
REF 18
REF 1
REF 14
REF 16
REF17
REF14
REF 2
30 REF
REF31
REF32
REF32
6 PLACES
TIE ENDS
TIE ENDS
2 PLACES
HOLE, HOSES ACCESS
SECTION AE-AE
SCALE 1 : 4
FROM SHT 3
REF22
2 REF
KEEP HOLE SHAPE - DO NOT WELD INSIDE HOLE
SEE DETAIL H, SHEET 5
PE 32-12-6536 - Page 14 of 55
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 5 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
28 REF
2 PLACES
DETAIL G
WRAP AROUND
TIE ENDS
2 PLACES
14"
SCALE 2 : 7
FROM SHT 3
SECTION L-L
REF4
REF 4
REF5
REF2 REF 1
REF 6
REF 21
REF20
REF 3
TIE ENDS
WRAP AROUND
TIE ENDS
WRAP AROUND
2 PLACES
TIE ENDS
WRAP AROUND
TIE ENDS
TIE ENDS
TIE END
WRAP AROUND
TIE END
WRAP AROUND
TIE ENDS
1/2" MAXTIE ENDS
1/2" MAX 515
32"
64"
12" STK
SCALE 1 : 7
FROM SHT 3
SECTION B-B
EE
SCALE 1 : 4
VIEW E-E
24 REF
REF
REF
REF 2
5 PLACES
(6X 11 16")
HOLES OF ITEM 24 MUST
LINE-UP WITH HOLES IN ITEM 3
MM
TIE ENDS
DO NOT PLUG HOLE
2 PLACES
WRAP AROUND
SCALE 3 : 8
2 PLACES
DETAIL H
REF22
WRAP AROUND
TIE ENDS
2 PLACES
SCALE 1 : 4
SECTION M-M
REF24
3 REF
DETAIL 2 PLACES
WRAP AROUND
BEFORE WELDING UPPER PIECE
REMOVE LOWER PIECE FROM SUB-ASSEMBLY, ITEM 10
SERIAL NO. OF UPPER & LOWER PIECES MUST BE THE SAME.
FROM ANOTHER SUB-ASSEMBLY.
REF 4
AND MUST RE-INSTALLED AS SUCH - DO NOT MIX PIECES
10 REF
SERIAL NUMBER FACING THIS SIDE
REF
UPPER AND LOWER PIECE ARE A
UPPER PIECE
"MATCH SET"
OF SUB-ASSEMBLY ITEM 10 WITH
UPPER PIECE ONLY
DETAIL 2 PLACES
TIE ENDS
UPPER PIECE ONLY
DETAIL 2 PLACES
TIE ENDS
TIE ENDS
WRAP AROUND
2 PLACESTIE ENDS
LOWER PIECE OF SUB-ASSEMBLY ITEM 10 - DO NOT WELD
TIE ENDS
DETAIL 2 PLACES
5"
14"
WELD ITEMS 1 AND 3
BEFORE WELDING ITEMS 20 AND 21
SCALE 1 : 1
DETAIL X
TIE ENDS
REF20
3 REF
REF
1 REF
REF
1/2" MAX
1/2" MAX
12"
14"
SCALE 1 : 1
ITEM 10 (2 PLACES)
DETAIL AD
NOTE NOTCH ORIENTATION AS SHOWN BEFORE WELDING
TIE ENDS
WELD ITEMS 2 AND 3
SCALE 1 : 1
DETAIL AA
BEFORE WELDING ITEMS 20 AND 21
REF2
REF21
24 REF
REF2
REF
REF
1/2" MAX
1/2" MAX
12"
14"
PE 32-12-6536 - Page 15 of 55
4X 141 2"+-
1/4" 0"
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 6 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
SCALE 3 : 8
FROM SHT 3
SECTION Z-Z
REF 19
REF36
REF 2 REF
28 REF
REF29
WRAP AROUND
ALONG PERIMETER
TIE ENDS
2 PLACES
TIE ENDS
TIE ENDS
(381 2")
CRITICAL DIMENSION
2"
64"
SCALE 1 : 4
FROM SHT 5
ISOMETRIC VIEW OF VIEW E-E
REF
REF 9
REF9
REF7
REF
REF 24
REF3
REF5
REF 1
REF
FACING AS SHOWN
WITH SERIAL NUMBER
ORIENT WELDMENT, ITEM 10
WITH SERIAL NUMBER
FACING AS SHOWN
ORIENT WELDMENT, ITEM 10
REF10
REF10
TIE ENDS
WRAP AROUND END
TIE ENDS
WRAP AROUND
TIE ENDS
DETAIL 2 PLACES
DETAIL 2 PLACES
TIE ENDS
TIE ENDS
TIE ENDS
WRAP AROUND
WRAP AROUND ENDS
DETAIL 2 PLACES
TIE ENDS
WRAP AROUND
DETAIL 2 PLACES
WRAP AROUND
TIE ENDS
SCALE 1 : 1
DETAIL V
26 REF
REF
REF 1
4 - 6
2 - 6
DETAIL 2 PLACES
SCALE 3 : 4
DETAIL W2 REF
REF11
REF 26
DETAIL 8 PLACES
SEE SHT 7
SCALE 1 : 4
FROM SHT 3
VIEW AC-AC
AXIS OF CONCENTRIC HOLES
REF
FOR BOTH ITEM 10 PAIR
REF2 REF
SEE SHT 7
10 REF
14"
AGAG
SCALE 3:4
DETAIL AF
REF
28 REF
PE 32-12-6536 - Page 16 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 7 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
SCALE 1 : 4
PARTIAL CURB-SIDE ISOMETRIC VIEW
20 REF
REF
REF 1
REF 3
REF
TIE ENDS
TIE ENDS
TIE ENDS
DETAIL 2 PLACES
TIE ENDS
TIE ENDS
SCALE 1 : 4
PARTIAL ROAD-SIDE ISOMETRIC VIEW
REF21
REF23
REF2
REF3
REF 6
REF 1
TIE ENDS
TIE ENDS
WRAP AROUND END
TIE ENDS
A0.015
SCALE 3 : 8
FROM SHT 6
SECTION AG-AG
REF10 REF10
REF4
REF
A 2.270
2.270
PE 32-12-6536 - Page 17 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 8 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:12
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
8" STK
4" STK
12" STK
12" STK
0.188
175"
4" STK
MECHANICAL STRAIGHTENING PERMISSIBLE
SCALE 7 : 16
ITEM 1
CALTRANS CAD MODEL # 076079
REF
0.188
1932"
3164"
5X 31 8"
5X 23 4"
2X 465 8" 2X 43
4" 2X 43 4"
2X 7"
10X 9 32"
2X 28"
4" STK
8" STK
12" STK
12" STK
REF2
SCALE 7 : 16
CALTRANS CAD MODEL # 076080
MECHANICAL STRAIGHTENING PERMISSIBLE
ITEM 2
0.188
5X 31 8"
1932"
3164"
2X 465 8" 2X 43
4"
2X 28"
2X 43 4"
10X 9 32"
2X 7"
5X 23 4"
0.188
4" STK
175"
PE 32-12-6536 - Page 18 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 9 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
8" 10"
2X 21 4"
2X 5 16"
26"
ITEM 3
CALTRANS CAD MODEL # 10-000184
SCALE 1 : 4
3X 51 8"
8"
2X 81 2" 2X 9"
4X R1"
2X 169 64"
2X 6" 2X 37 8"
6X 11 16"
3X 63 4"
64"
2X 121 4"
2X 15.0°
2X 3"
2" 11"
2"
64"
2X 5 16"
3 REF
2X R5 8"
8"
8"
8"
12" STK
ISOMETRIC VIEW
SHOWN FOR REF ONLY
UP 90.0° R 5/8"
UP 90.0° R 5/8"
ITEM 3 - FLAT PATTERN
CALTRANS CAD MODEL # 10-000184
SCALE 1:4
13.870
3.620
36.357
26.000
PE 32-12-6536 - Page 19 of 55
4"
64"
8"
8"
64"
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 10 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
VIEW J-J
15.0°
70.0°
R2"
64"
9"
8"
ITEM 4
CALTRANS CAD MODEL # 10-000185
SCALE 1:2
21"
16"
R17 64"
4"
2"
8"
R1"
R3 4"
R2"
R2"
64"
8"
7"
2X 52.0°
3X R1 2"
2X R1"
4 REF
12" STK
CALTRANS CAD MODEL # 10-000187
ITEM 5
SCALE 1:2
5 REF
J
J
15.0°
R5 8"
12" STK
UP 15.0° R 5/8"
ITEM 5 - FLAT PATTERN
CALTRANS CAD MODEL # 10-000187
SCALE 1:2
5.000
12.547
9.000
PE 32-12-6536 - Page 20 of 55
64"
4"
32"
32"
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 11 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
CALTRANS CAD MODEL # 08-001278
ITEM 6
SCALE 1:2
6 REF
N
N
R5 8"
15.0°
12" STK
VIEW N-N
15.0°
9"
70.0°
64"
8"
UP 15.0° R 5/8"
ITEM 6 - FLAT PATTERN
CALTRANS CAD MODEL # 08-001278
SCALE 1:2
12.547
5.000
9.000
UP 45.0° R 5/8"
ITEM 7 - FLAT PATTERN
CALTRANS CAD MODEL # 10-000188
SCALE 1:2
3.000
14.000
6.375
REF7
ITEM 7
CALTRANS CAD MODEL # 10-000188
SCALE 1:2
R5 8"
12" STK
45.0°
Q
Q
VIEW Q-Q
45.0
51.3°
8"
4"
R1"
2"
32"
PE 32-12-6536 - Page 21 of 55
32"
4"
32"
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 12 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
SCALE 1: 2
CALTRANS CAD MODEL # 10-000189
ITEM 8
8 REF
12" STK
R5 8"
45.0°
R
R
8"
8"
38" STK
R1 2"
UP 45.0° R 5/8"
ITEM 8 - FLAT PATTERN
CALTRANS CAD MODEL # 10-000189
SCALE 1:2
3.000
14.000
6.375
REF 11
ITEM 11
CALTRANS CAD MODEL # 10-000193
SCALE 1:2
8"
2"
SCALE 1:2
CALTRANS CAD MODEL # 10-000190
ITEM 9
9 REF
1"
SECTION R-R
4"
51.3°
8"
R1"
2"
32"
U P
.0 R /2
ITEM 9 - FLAT PATTERN
CALTRANS CAD MODEL # 10-000190
SCALE 1:2
2.990
8.980
1.000
SCALE 1:2
CALTRANS CAD MODEL # 08-001275
ITEM 12
12 REF
8"
2"
58" STK
R11 4"
12" STK
10.0°
ITEM 13 - FINAL PART SHAPE
OUR SHOP TOOLS REQUIRED A LONGER PART TO BEND
SEE SEPARATE DRAWING
CALTRANS CAD MODEL # 08-001274
FOR FABRICATION OPTION
SCALE 1 : 1
13 REF
5"
316" STK
PE 32-12-6536 - Page 22 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 13 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
ITEM 14
CALTRANS CAD MODEL # 10-000194
SCALE 1:2
T
T 26"
38.7°
16.000
14" STK
SCALE 1:2
CALTRANS CAD MODEL # 10-000196
ITEM 16
16 REF
4"
8"
2X R3 4"
2X 7 8"
2X 17 8"
4"
4"
SCALE 1:2
CALTRANS CAD MODEL # 10-000195
ITEM 15
15 REF
8"
16"
4X R3 8"
14 REF
4" STK
8" STK
3" STK
VIEW T-T
38.7°
16"
316" STK
REF 17
ITEM 17
CALTRANS CAD MODEL # 10-000197
SCALE 1:2
5"
4"
2"
2X R5 8"
12" STK
4"
REF18
ITEM 18
CALTRANS CAD MODEL # 10-000198
SCALE 1:2
4"
4"
4X R3 8"
REF33
ITEM 33
CALTRANS CAD MODEL # 04-000213
SCALE 1 : 1
8"
34" 38"
1"
64"
UP 90.0° R 5/8"
UP 90.0° R 5/8"
ITEM 17 - FLAT PATTERN
CALTRANS CAD MODEL # 10-000197
SCALE 1:2
4.495
3.495
15.482
4.000
14" STK
14" STK
PE 32-12-6536 - Page 23 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 14 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 4:1
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2012 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS PART
STOCK # / CAD #
101 1 C8 x 11.5 LBS/FT STANDARD C-CHANNEL, STEEL PER
ASTM A572, GRADE 50
08-001095
102 1
3/8" THK PLATE, DRY, LASER QUALITY, A36 STEEL HOT
ROLLED, PICKLED & OILED PER ASTM A36
08-001106
316" STK
REF20
ITEM 20
CALTRANS CAD MODEL # 08-001246
SCALE 1 : 2
13"
12" STK
12" STK 12"+-
1/16" 0"
12"+- 1/16" 0"
4" STK
4" STK
REF34
ITEM 34
CALTRANS CAD MODEL # 04-000218
SCALE 1 : 1
4"
2"
REF35
ITEM 35
CALTRANS CAD MODEL # 04-000221
SCALE 1 : 1
2"
4"
38" STK
12" STK
12" STK
12"+- 1/16" 0"
12"+- 1/16" 0"
4" STK
8"
ITEM 22 - ISOMETRIC VIEW
SHOWN FOR REF ONLY
SCALE 1 : 4
26"
8" STK
4" 217
64" STK
REF21
ITEM 21
CALTRANS CAD MODEL # 08-001247
SCALE 1 : 2
13"
8" STK
64" STK
32" STK
64" STK
SCALE 1 : 4
CALTRANS CAD MODEL # 08-001095
ITEM 101
101 REF
8"
4" 39
16"
26"
2X 47 16"
16"
2"
16"
8" 2X R7
8"
102 REF
SCALE 1 : 4
SECTION U-U
101 REF
4"
64" STK
ALONG PERIMETER
TIE ENDS
SCALE 1 : 4
CALTRANS CAD MODEL # 08-001105
ITEM 22
REF102
REF101
TIE ENDS
2 PLACES
U
U
REF102
ITEM 102
CALTRANS CAD MODEL # 08-001106
SCALE 1 : 4
2X 45 8"
32"
2X R7 8"
38" STK
2X R1 2"
4"
D O W N
.0 R /2
D O W N
.0 R /2
ITEM 102 - FLAT PATTERN
CALTRANS CAD MODEL # 08-001106
SCALE 1 : 4
4.240 4.240
21.428
2.250
PE 32-12-6536 - Page 24 of 55
4" MAX
32"
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 15 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
12" STK
12" STK
10.0°
12" STK
R11 4"
REF23
ITEM 23
CALTRANS CAD MODEL # 08-001248
SCALE 1:2
4"
2X 191 8"
1732"
R319 32"
8"
REF24
ITEM 24
CALTRANS CAD MODEL #08-001249
SCALE 1:2
25"
4"
2X 33 8" 2X 6"
3X 21 2"
3X 63 4"
2X R11 4"
5X 34"
5X 11 2"
5X 57 8"
4" TYP
16"
2X 169 64"
16" 63
8" 33 8" 61
8"
4"
4"
6X 11 16"
2"
REF25
ITEM 25 - FINAL PART SHAPE
OUR SHOP TOOLS REQUIRED A LONGER PART TO BEND
SEE SEPARATE DRAWING
CALTRANS CAD MODEL # 08-001277
FOR FABRICATION OPTION
SCALE 1 : 1
5"
PE 32-12-6536 - Page 25 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 16 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
14" STK
REF27
ITEM 27
CALTRANS CAD MODEL # 08-001281
SCALE 1:2
17"
34"
51"
16"
16"
16"
16"
17"
34"
51"
8X 21 64"
32"
8X 4964"
32"
SCALE 1:2
CALTRANS CAD MODEL # 076081
ITEM 26
26 REF
6X 21 64"
8" 10"
20"
30"
40"
50"
6X 4964"
4"
32"
14" STK
32"
REF29
ITEM 29
CALTRANS CAD MODEL # 08-001285
SCALE 1:2
32"
2X 2"
316" STK
2X R5 16"
4" STK
32" STK
64" STK
64" STK
REF28
ITEM 28
CALTRANS CAD MODEL # 08-001284
SCALE 1:2
32" 83
16"
2X R1 2" 2"
26"
U P
.0 R /1
U P
.0 R /1
ITEM 29 - FLAT PATTERN
CALTRANS CAD MODEL # 08-001285
SCALE 1:2
1.794 1.794
11.332 1.721
PE 32-12-6536 - Page 26 of 55
64"
4"
2"
32"
28.5°
64"
4"
D
C
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
D
SHEET 17 OF 17
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2022 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
N O N E
BILL OF MATERIALS
Manuel Herrera
NONE
1140.61 LBS
7/19/2022
WELDMENT
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
LANDSCAPE ROLL-OFF
LIFT-FRAME
076067
WEIGHT
Meta Data =
SCALE 1 : 1
CALTRANS CAD MODEL # 08-001311
ITEM 31
31 REF
51.3°
2"
R2" 12"
1"
2"
32"
28.5°
32"
2X R1 8"
12" STK
30.0°
R5 8"
SCALE 1 : 1
CALTRANS CAD MODEL # 08-001302
ITEM 30
30 REF
12"
1"
2"
2X R1 8"
32"
51.3°
R2"
U P
.0 R /8
ITEM 30 - FLAT PATTERN
CALTRANS CAD MODEL # 08-001302
SCALE 1 : 1
3.155 2X R1 2"
11.320
6.025
REF 32
ITEM 32
CALTRANS CAD MODEL # 08-001315
SCALE 1 : 1
64"
38.7°
16"
16" 38" STK
12" STK
R5 8" 30.0°
U P
.0 R /8
ITEM 31 - FLAT PATTERN
CALTRANS CAD MODEL # 08-001311
SCALE 1 : 1
3.155
11.320
6.025
PE 32-12-6536 - Page 27 of 55
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS 3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER 5.
POSSIBLE. USE PROPER PROCEDURES AND SEQUENCE OF WELDING
TO AVOID NEEDLESS DISTORTION, AND MINIMIZE SHRINKAGE, WARPING,
AND TWISTING OF THE ASSEMBLY.
ALL JOINTS TO BE WELDED CONTINUOUS UNLESS OTHERWISE SPECIFIED.6.
SIZE OF ALL APPLICABLE WELDS TO BE AT LEAST THE THICKNESS OF THE
THINNER OF THE ADJOINING PARTS. WELDS TO BE UNIFORM AND NEAT
IN APPEARANCE IN ACCORDANCE WITH INDUSTRY BEST PRACTICES.
SEALANT SHALL BE APPLIED AFTER PAINTING TO ALL JOINTS AND SEAMS7.
NOT WELDED CONTINOUS. SEAL USING SIKAFLEX-521 UV RESISTANT,
WHITE COLOR MANUFACTURED BY SIKA CORPORATION.
8 APPLY CORROSION-RESISTANCE ANTI-SEIZE LUBRICANT TO THREADS.
9 ALIGN ITEM 1 AND ITEM 2 AS SHOWN IN ORDER TO BORE COMMON HOLE;
THEREBY, CREATING A "MATCH SET" OF PARTS. IDENTIFY PARTS IN THE SET WITH
UNIQUE SERIAL NUMBER AS SHOWN GRAPHICALLY. DO NOT PAINT BORED HOLE,
APPLY GREASE TO LUBRICATE.
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 1 OF 2
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
H
BILL OF MATERIALS
Raul Valdez
G
23.90 LBS
11/23/2022
PILLOW BLOCK TRUNION MOUNT
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL OFF LIFT FRAME
10-000200
WEIGHT
Meta Data =
32X
52X
62X
REF
SECTION A-A
2 REF
2.270
2.500
4.000
8.000
7.500
REV. DESCRIPTION DATE APPROVED
REVISIONS
G ZERK-FITTING THRU HOLE IS 3/16", WAS 1/8" (EASE OF MACHINING REQUEST) 11/23/2022 Manuel Herrera
F ADDED CALTRANS STOCK NUMBER 051-6543 TO DRAWING 3/25/2019 Manuel Herrera
NONE PRELIMINARY 9/18/2017 RAUL VALDEZ
ITEM
NO.
QTY. DESCRIPTION
SUPPLIER/MFG
PART NO.
CALTRANS
PART NO.
1 1 1½” x 2½” HOT ROLLED FLAT, DESCALED & OILED, A36 STEEL PER ASTM A36
10-000202
2 1 1½” x 5” HOT ROLLED FLAT, DESCALED & OILED, A36 STEEL PER ASTM A36
10-000201
3 2 HEX HEAD CAP SCREW, 1/2"-13 UNC-2A x 3-3/4"
LONG, PARTIALLY THREADED, ALLOY STEEL,
GRADE 8, ZINC YELLOW-CHROMATE PLATED
4 1 ZERK GREASE FITTING, 1/8 NPTF (DRYSEAL) MALE x
45 DEGREE ELBOW, ZINC-PLATED STEEL
McMASTER-
CARR PART #
1095K23
5 2
FLAT WASHER, 1/2" SCREW SIZE, 1-1/16" OD, .09"-
.18" THK, SAE, STEEL, GRADE 8, ZINC YELLOW-
CHROMATE PLATED
SUPPLIER/MFG
PART NO.
CALTRANS
PART NO.
6 2
SPLIT LOCK WASHER FOR 1/2" SCREW SIZE, 0.512"
ID, 0.869" OD, 0.125" THICKNESS, STEEL, GRADE 8,
ZINC YELLOW-CHROMATE PLATED
C T S
TK
-6
METAL STAMP OR ENGRAVE WITH 1/4" CHARACTERS x .010" DEEP MIN.
REF2
REF
SCALE 1:1
ASSEMBLY
CALTRANS CAD MODEL # 10-000200
MATCH SET MARKING AS SHOWN:
IDENTIFY EACH PART IN THE "SET" (ITEM 1 & ITEM 2) WITH
THE SAME UNIQUE SERIAL NUMBER CONSISTING OF
"DATE-SERIAL NUMBER", FOR EXAMPLE:
9-20-17-1 (MARKED SEPTEMBER 20, 2017, MATCH SET # 1),
9-20-17-2 (MARKED SEPTEMBER 20, 2017, MATCH SET # 2),
10-10-17-1 (MARKED OCTOBER 10, 2017, MATCH SET # 1),
AND SO ON.
2X 58"
16"
2.500
14" TYP
2X 1.500
A
A
BORING HOLE BETWEEN THESE PARTS
SCALE 3 : 1
DETAIL C
REF
ITEM 1 AND ITEM 2 SHALL BE ALIGNED,
AND SECURELY CLAMPED PRIOR TO
1 REF
PE 32-12-6536 - Page 28 of 55
B
A A
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
R E V
-0
D
SHEET 2 OF 2
UNLESS OTHERWISE SPECIFIED:
SCALE: 2:1
REVDWG. NO.
D
SIZE
TITLE:
NAME DATE
ENG APPR.
DESIGNER
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
© COPYRIGHT 2017 CALIFORNIA DEPARTMENT
OF TRANSPORTATION. ALL RIGHTS RESERVED.
THIS DOCUMENT CONTAINS CONFIDENTIAL
AND PROPRIETARY INFORMATION THAT
CANNOT BE REPRODUCED OR DIVULGED, IN
WHOLE OR IN PART, WITHOUT WRITTEN
AUTHORIZATION FROM CALTRANS DIVISION OF
EQUIPMENT, OFFICE OF ENGINEERING AND
PRODUCTION.
H
BILL OF MATERIALS
Raul Valdez
G
23.90 LBS
11/23/2022
PILLOW BLOCK TRUNION MOUNT
ASSEMBLY
DIVISION OF EQUIPMENT
STATE OF CALIFORNIA
DEPARTMENT OF TRANSPORTATION
10 YD ROLL OFF LIFT FRAME
10-000200
WEIGHT
Meta Data =
1.5 STK
1.250 2X .531 THRU ALL 5.500
2X .750
SCALE 1 : 1
CALTRANS CAD MODEL # 10-000202
ITEM 1
A
.002
A 8.000
2X 2.500
.050±.005 2.0000
.0000 .0020
2.4950 .0020 .0000
ITEM 2
CALTRANS CAD MODEL # 10-000201
SCALE 1 : 1
1.5 STK
2X .422 1.375
1/2-13 UNC - 2B 1.250
5.500
3X .750
1.250
1.995 .0020 .0000
2.500 .000 .002
4.000
.188 THRU ALL
1/8" NPT, FAR SIDE
B
B
.002
SCALE 1 : 1
SECTION B-B
A
5.000
8.000
2X 1.25
.063±.005
REF1
ITEM 1 - ISOMETRIC VIEW
SHOWN FOR REF ONLY
SCALE 1 : 1
REF2
ITEM 2 - ISOMETRIC VIEW
SHOWN FOR REF ONLY
SCALE 1 : 1
PE 32-12-6536 - Page 29 of 55
SOME DIMENSIONS MAY BE ROUND-OFF TO 1/16" IN ORDER TO2.
FACILITATE INSPECTION BY SHOP PERSONNEL.
REMOVE MILL SCALE, OIL, GREASE, AND OTHER CONTAMINANTS3.
FROM METAL SURFACES BEFORE WELDING. METAL SURFACES SHALL
BE CLEAN, AND DRY BEFORE PAINTING.
ALL WELDS, ELECTRICAL AND PAINT WILL BE IN COMPLIANCE WITH 4.
CALTRANS EQUIPMENT QUALITY STANDARDS. GO TO
www.dot.ca.gov/hq/eqsc TO VIEW EQUIPMENT QUALITY STANDARDS.
5. THE WORK SHALL BE POSITIONED FOR FLAT WELDING WHENEVER
POSSIBLE. USE PROPER…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .