IB08_Solicitation - W9124D25QA112_Raleigh MEPS NM_Released.pdf

PDF 3 MB Posted

Attached to
Raleigh MEPS Noon Meals
Solicitation number
W9124D25QA112
Issued by

About this file

This solicitation/contract is for providing noon meals (sub sandwiches) to applicants at the Raleigh Military Entrance Processing Station (MEPS) from 1 June 2025 through 31 May 2028. The contract is set aside as a Women-Owned Small Business (WOSB) procurement with a total estimated contract value of $47,000,000, covering an estimated 18,307 meals per contract period. The base period and two one-year option periods each have the same estimated meal quantity, with pricing arranged as a firm fixed price. The government guarantees to procure a minimum of $1,500 of noon meals during the base period.

The solicitation includes a Performance Work Statement specifying meal requirements, with meals to be served at the Raleigh MEPS located at 2625 Appliance Court, Raleigh, NC. The contract will be awarded through the Mission and Installation Contracting Command at Fort Knox, Kentucky, with the solicitation issued on 08 May 2025 and offers due by 22 May 2025 at 10:00 AM Eastern Time. Offerors must submit a current health inspection report, comply with specific representation and certification requirements, and will be evaluated on health inspection reports and past performance, with award going to the lowest-priced technically acceptable offer.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect 8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NUMBER

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

29. AWARD OF CONTRACT: REFERENCE OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

calls)

Solicitation/Contract Form Continuation

Raleigh Military Entrance Processing Station Noon Meals

W9124D25QA112

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Estimated Quantity

Unit Unit Price Amount

Provide Noon Meals (sub sandwiches) to applicants processing through the Raleigh Military Entrance Processing Station (MEPS) in accordance with the attached Performance Work Statement (PWS) for the base period of 1 June 2025 through 31 May 2026.

The Government guarantees to procure $1500.00 of Noon Meals.

Pricing Arrangement: Firm Fixed Price

18,307 Each

Option Line Item

Provide Noon Meals (sub sandwiches) to applicants processing through the Raleigh Military Entrance Processing Station (MEPS) in accordance with the attached Performance Work Statement (PWS) for the first option period of 1 June 2026 through 31 May 2027.

Pricing Arrangement: Firm Fixed Price

18,307 Each

Option Line Item

Provide Noon Meals (sub sandwiches) to applicants processing through the Raleigh Military Entrance Processing Station (MEPS) in accordance with the attached Performance Work Statement (PWS) for the second option period of 1 June 2027 through 31 May 2028.

Pricing Arrangement: Firm Fixed Price

18,307 Each

Continuation of Description

Requirements Requirement to provide and serve noon meals for applicants processing through the Raleigh MEPS during the base period. Applicable Wage Determination - North Carolina/Wake/WD # 2015-4393/Rev #30/Date 04/29 /2025.

Product Service Code: S203

Option Line Item

Product Service Code: S203

Option Line Item

Product Service Code: S203

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: See Performance Work Statement for instructions.

DoDAAC: W910KM CountryCode: USA

W180 MEPS RALEIGH

2625 APPLIANCE COURT, RALEIGH NC 27604-2468

RALEIGH, NC 27604-2468

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Performance Work Statement for instructions.

DoDAAC: W910KM CountryCode: USA

W180 MEPS RALEIGH

2625 APPLIANCE COURT, RALEIGH NC 27604-2468

RALEIGH, NC 27604-2468

UNITED STATES

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: See Performance Work Statement for instructions.

DoDAAC: W910KM CountryCode: USA

W180 MEPS RALEIGH

2625 APPLIANCE COURT, RALEIGH NC 27604-2468

RALEIGH, NC 27604-2468

UNITED STATES

Continuation of Deliveries or Performance

From 01 Jun 2025 to 31 May 2026

Line Item Delivery Schedule Estimated Quantity

Address and POC

Period of Performance From 01 Jun 2025 To 31 May 2026

18,307 Each Place of Performance DoDAAC: W910KM CountryCode: USA

W180 MEPS RALEIGH

2625 APPLIANCE COURT, RALEIGH NC 27604-2468

RALEIGH, NC 27604-2468

UNITED STATES

Option Line Item

Period of Performance From 01 Jun 2026 To 31 May 2027

18,307 Each Place of Performance DoDAAC: W910KM CountryCode: USA

W180 MEPS RALEIGH

2625 APPLIANCE COURT, RALEIGH NC 27604-2468

RALEIGH, NC 27604-2468

UNITED STATES

Option Line Item

Period of Performance From 01 Jun 2027 To 31 May 2028

18,307 Each Place of Performance DoDAAC: W910KM CountryCode: USA

W180 MEPS RALEIGH

2625 APPLIANCE COURT, RALEIGH NC 27604-2468

RALEIGH, NC 27604-2468

UNITED STATES

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-3 Gratuities. Apr 1984 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.

Jan 2023

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.243-7002 Requests for Equitable Adjustment. Dec 2022 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

Not Applicable

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

Not Applicable

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site /uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded ____ Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with Subcontracts paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.

(DEVIATION 2025-O0003 and 2025-O0004)

(Jan 2025) Deviation 2025-O0004 (Mar 2025)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, (Jan 2017) of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(Nov 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(Mar 2023)

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(Aug 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(Oct 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. Alternate I 4655).

52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).[N/A] (2) (Nov 2021)

52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. [N/A] (3) (Jun 2010) 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, [N/A] (4) (Nov 2023) NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).[X] (5) (Jun 2020)

[Reserved].(6)

52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).[N/A] (7) (Oct 2016)

52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. [N/A] (8) (Oct 2016) C).

52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).[X] (9) (Jun 2023)

52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, [N/A] (10) and Multi-Agency Contracts. (Pub. L. 115-390, title II).(Dec 2023)

[N/A] (11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)

Alternate I of 52.204-30.(ii) (Dec 2023)

[N/A] (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31 U.S.C. 6101 note).Jan

52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).[N/A] (13) (Oct 2018)

[Reserved].(14)

52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).[N/A] (15) Oct 2022

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the [N/A] (16) Oct 2022 preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[Reserved](17)

(18)

[X] (i) 52.219-6, Notice of Total Small Business Set-Aside (15 U.S.C. 644).(Nov 2020)

Alternate I of 52.219-6.[N/A] (ii) (Mar 2020)

[N/A] (19)

[N/A] (i) 52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(Nov 2020)

Alternate I of 52.219-7.[N/A] (ii) (Mar 2020)

52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).[X] (20) ( )Jan 2025

(21)

[N/A] (i) 52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)).( )Jan 2025

Alternate I of 52.219-9.[N/A] (ii) (Nov 2016)

Alternate II of 52.219-9.[N/A] (iii) (Nov 2016)

Alternate III of 52.219-9.[N/A] (iv) (Jun 2020)

Alternate IV of 52.219-9.[N/A] (v) ( )Jan 2025

(22)

[N/A] (i) 52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(Mar 2020)

Alternate I of 52.219-13.[N/A] (ii) (Mar 2020)

52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).[X] (23) Oct 2022

[N/A] (24) 52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(Sep 2021)

52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns [N/A] (25) Eligible Under the SDVOSB Program ( ) (15 U.S.C. 657f).Feb 2024

(26)

[X] (i) 52.219-28, Small Business Program Rerepresentation (15 U.S.C. 632(a)(2)).Postaward ( )Jan 2025

Alternate I of 52.219-28.[X] (ii) (Mar 2020)

52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ([N/A] (27) ) (15 U.S.C. 637(m)).Oct 2022

52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-[N/A] (28) Owned Small Business Program ( ) (15 U.S.C. 637(m)).Oct 2022

52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).[N/A] (29) (Mar 2020)

52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).[N/A] (30) (Sep 2021)

52.222-3, Convict Labor (E.O.11755).[X] (31) (Jun 2003)

[X] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(Jan 2025)

[Reserved](33)

[Reserved](34)

(35)

[X] (i) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)

Alternate I of 52.222-35.[N/A] (ii) (Jul 2014)

(36)

[X] (i) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(Jun 2020)

Alternate I of 52.222-36.[N/A] (ii) (Jul 2014)

52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).[X] (37) Jun 2020

52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).[X] (38) (Dec 2010)

(39)

[X] (i) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627).(Nov 2021)

Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).[N/A] (ii) (Mar 2015)

[N/A] (40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (Jan 2025) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(41)

[N/A] (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)).

(Not applicable to the acquisition of commercially available off-the-shelf items.)

Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf [N/A] (ii) (May 2008) items.)

52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).[N/A] (42) (May 2024) et seq.

52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, [N/A] (43) (May 2024) et ).seq.

52.223-20, Aerosols (42 U.S.C. 7671, ).[N/A] (44) (May 2024) et seq.

52.223-21, Foams (42 U.S.C. 7671, ).[N/A] (45) (May 2024) et seq.

52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. [N/A] (46) 8259b, and 42 U.S.C. 7671l).

(47)

[X] (i) 52.224-3 Privacy Training (5 U.S.C. 552 a).(Jan 2017)

Alternate I of 52.224-3.[N/A] (ii) (Jan 2017)

(48)

[N/A] (i) 52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(Oct 2022)

Alternate I of 52.225-1.[N/A] (ii) (Oct 2022)

(49)

[N/A] (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. (NOV 2023) 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109- 169, 109-283, 110-138, 112-41, 112-42, and 112-43.

Alternate I [Reserved].[N/A] (ii)

Alternate II of 52.225-3.[N/A] (iii) (Jan 2025)

Alternate III of 52.225-3.[N/A] (iv) (Feb 2024)

Alternate IV (Oct 2022) of 52.225-3.[N/A] (v)

52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).[N/A] (50) (NOV 2023) et seq

52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of [N/A] (51) (Feb 2021) Foreign Assets Control of the Department of the Treasury).

52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the [N/A] (52) National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).[N/A] (53)

52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.S.C. 5150).[N/A] (54) (Nov 2007)

52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).[N/A] (55) (May 2024)

52.229-12, Tax on Certain Foreign Procurements .[N/A] (56) (Feb 2021)

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. [N/A] (57) (Nov 2021) 3805).

52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).[N/A] (58) (Nov 2021)

52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).[N/A] (59) (Oct2018)

52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).[N/A] (60)

52.232-36, Payment by Third Party (31 U.S.C. 3332).[X] (61) (May 2014)

52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).[N/A] (62) (Aug 1996)

52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign [N/A] (63) Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)

52.242-5, Payments to Small Business Subcontractors (15 U.S.C. 637(d)(13)).[N/A] (64) (Jan 2017)

(65)

[N/A] (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631).(Nov 2021)

Alternate I of 52.247-64.[N/A] (ii) (Apr 2003)

Alternate II of 52.247-64.[N/A] (iii) (Nov 2021)

[N/A] (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[X] (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

52.222-42, Statement of Equivalent Rates for Federal Hires (29 U.S.C. 206 and 41 U.S.C. chapter 67).[X] (2) (May 2014)

52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) [X] (3) (Aug (29 U.S.C. 206 and 41 U.S.C. chapter 67).2018)

52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.[N/A] (4) C. chapter 67).

52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of [N/A] (5) Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements [N/A] (6) (May (41 U.S.C. chapter 67).2014)

52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .[X] (7) (Jan 2022)

52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).[X] (8) (Jan 2022)

52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).[X] (9)

52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (49 U.S.C. [N/A] (10) (Jan 2025) 40118(g)).

(d) . The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded Comptroller General Examination of Record using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509).(Nov 2021)

(ii) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712).(Nov 2023)

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(Jun 2023)

(vii)

(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(Dec 2023)

(B) Alternate I of 52.204-30.(Dec 2023)

(viii) 52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting ( )Jan 2025 opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) [Reserved]

(x) [Reserved]

(xi) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212).(Jun 2020)

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (29 U.S.C. 793).(Jun 2020)

(xiii) 52.222-37, Employment Reports on Veterans (38 U.S.C. 4212).(Jun 2020)

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496). Flow down required in (Dec 2010) accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter 67).(Aug 2018)

(xvi)

(A) 52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O 13627).(Nov 2021)

(B) Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(Mar 2015)

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (E.O. 12989).(Jan 2025)

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 .(Jan 2022)

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706).(Jan 2022)

(xxii)

(A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I of 52.224-3.(Jan 2017)

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Section 862, as amended, of the National (Oct 2016) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (42 U.S.C. 1792). Flow down required in accordance with (Jun 2020) paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)

(xxvii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down (Nov 2021) required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

Addendum to Contract Clauses

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.223-5 Pollution Prevention and Right-to-Know Information. May 2024 52.204-9 Personal Identity Verification of Contractor Personnel. Jan 2011 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023 252.201-7000 Contracting Officer's Representative. Dec 1991 252.225-7048 Export-Controlled Items. Jun 2013 252.204-7003 Control of Government Personnel Work Product. Apr 1992 252.243-7001 Pricing of Contract Modifications. Dec 1991

FAR Clauses Incorporated by Full Text

52.217-8 Option to Extend Services. (Nov 1999)

Option to Extend Services (Nov 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 60 days of contract expiration.

(End of clause)

52.217-9 Option to Extend the Term of the Contract. (Mar 2000)

Option to Extend the Term of the Contract (Mar 2000)

The Government may extend the term of this contract by written notice to the Contractor within the current contract period; provided that the (a) Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.

If the Government exercises this option, the extended contract shall be considered to include this option clause.(b)

The total duration of this contract, including the exercise of any options under this clause, shall not exceed three (3) years.(c)

(End of clause)

52.232-8 Discounts for Prompt Payment. (Feb 2002)

Discounts for Prompt Payment (Feb 2002)

(a) Discounts for prompt payment will not be considered in the evaluation of offers. However, any offered discount will form a part of the award, and will be taken if payment is made within the discount period indicated in the offer by the offeror. As an alternative to offering a discount for prompt payment in conjunction with the offer, offerors awarded contracts may include discounts for prompt payment on individual invoices.

(b) In connection with any discount offered for prompt payment, time shall be computed from the date of the invoice. If the Contractor has not placed a date on the invoice, the due date shall be calculated from the date the designated billing office receives a proper invoice, provided the agency annotates such invoice with the date of receipt at the time of receipt. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or, for an electronic funds transfer, the specified payment date. When the discount date falls on a Saturday, Sunday, or legal holiday when Federal Government offices are closed and Government business is not expected to be conducted, payment may be made on the following business day.

(End of clause)

52.232-1 Payments. (Apr 1984)

Payments (Apr 1984)

The Government shall pay the Contractor, upon the submission of proper invoices or vouchers, the prices stipulated in this contract for supplies delivered and accepted or services rendered and accepted, less any deductions provided in this contract. Unless otherwise specified in this contract, payment shall be made on partial deliveries accepted by the Government if-

(a) The amount due on the deliveries warrants it; or

(b) The Contractor requests it and the amount due on the deliveries is at least $1,000 or 50 percent of the total contract price.

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

Authorized Deviations in Clauses (Nov 2020)

The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated (a) by the addition of "(DEVIATION)" after the date of the clause.

The use in this solicitation or contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized (b) deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

List of Contract Documents, Exhibits, or Attachments

Identifier Document Name Document Description Reference Identifier

Date Line Item

Page Numbers

Document Type

Provided Under Separate Cover

IA02_PWS_25QA112_Raleigh MEPS NM_7 May 25_KO Approved

Performance Work Statement 08 May

Attachment No

Solicitation Provisions

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.204-16 Commercial and Government Entity Code Reporting. Aug 2020

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

Nov 2021

52.204-7 System for Award Management. Nov 2024 52.209-7 Information Regarding Responsibility Matters. Oct 2018 52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. Sep 2023

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials. Sep 2022

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

May 2021

252.204-7024 Notice on the Use of the Supplier Performance Risk System. Mar 2023 252.225-7055 Representation Regarding Business Operations with the Maduro Regime. May 2022

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region- Representation.

Jun 2023

Addendum to 52.212-1, Instructions to Offerors - Commercial Products and Commercial Services

FAR 52.212-1ADDENDUM

INSTRUCTIONS TO OFFERORS - COMMERCIAL PRODUCTSAND COMMERCIAL SERVICES

THIS REQUESTFOR QUOTE (RFQ) IS ISSUED AS A COMMERCIAL ACQUISITION USING A COMBINATION OFFEDERAL

ACQUISITION REGULATIONS (FAR) PARTS 12 AND 13.

FAR 52.212-1(c) is replaced with:

The offeror agrees to hold the prices in its offer firm for 90 calendar days from the date specified for receipt of offers.

1. Offerors shall submit any questions regarding this RFQ solicitation in writing to the Contract Specialist at amy.l.gawarecki.civ@army.

mil and the Contracting Officer at and the email box at USARMY Ft Knox ACCMICC Mailbox melissa.j.brackett.civ@army.mil MEPCOM Division usarmy.knox.acc-micc.mbx.mepcom-division@army.mil. Questions shall be received by the Contract Specialist and Contracting Officer no later than 10:00 am Eastern Time (ET) on 2024 to allow time for a written response. No remarks or written 1May responses to questions by government personnel shall change or qualify any of the terms or conditions of this RFQ. The RFQ may only be changed by a formal written amendment issued by Mission and Installation Contracting Command (MICC) Fort Knox, Kentucky.

2. Offerors shall ensure all required documents are included with the quote:

a) Standard Form 1449,duly executed by an official authorized to bind the offeror .

b) One legible copy of the state or local government health inspection report, if and as required for the proposed food service preparation facility. The health inspection shall be completed less than 12months from the date proposal submissions are due.

The facility must have received a score of A" or "B"; 85 or above or "pass", if pass/fail inspection system is used. The score " must be clearly annotated on the report. Failure to provide acceptable health inspection report will render the quote non-compliant.

c) One copy of any required subcontractor agreement, fully executed by both the prime contractor and the subcontractor (if any portion of the effort is to be subcontracted). Any use of subcontractors shall have a written agreement. Verbal

If the effort will not be subcontracted and the prime contractor name and/or address do not agreements are not acceptable.

match the name and/or address on the provided health inspection report, a technical description shall be provided in sufficient detail explaining why there is a difference in names and locations. This description may include other documents if necessary.

Failure to provide a signed subcontractor agreement or a further detailed explanation (as described above) will render the quote non-compliant.

d) Past Performance: In lieu of FAR 52.212-1(b)(10), offerors are not required to submit information for…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .