PERFORMANCE WORK STATEMENT

IA-JET WESTWIND 1124 RECURRENT PILOT QUALIFICATION

TRAINING

February 5, 2026

A. PROJECT/TITLE

IA-Jet Westwind 1124 Full Flight Simulator Pilot Training for Flight Standards Operations Inspectors and Aircraft Certification Pilots employed by the Federal Aviation Administration

(FAA).

B. BACKGROUND

Under Title 49 of the United States Code (49 U.S.C.), the FAA is authorized to acquire and expend funds for the acquisition, operation, and maintenance of aircraft as necessary in the exercise and performance of the powers and duties of the Administrator. The interests of the public, the safety of the workforce, and the credibility of the organization are best served by having qualified, proficient, and current inspectors conducting pilot evaluations, testing, and checking functions.

C. SCOPE

The contractor is to provide Recurrent Ground School Flight Training Devices (if applicable) and Flight Simulation training for one FAA inspector/pilot in the IA-Jet Westwind 1124 aircraft.

Student quotas for this course is assigned by the Flight Standards Workforce Development Division, AFB-500 or Aircraft Certification Service – Planning and Program Division AIR-500.

The course covered under this Purchase Order will meet the requirements for FAA formal flight training. FAA formal flight training consists of training courses with agency level course numbers that will be officially recorded in the employee’s personnel records.

D. DEFINITIONS

The following definitions are used to define the terminology contained herein and are applicable as required by Title 14 of the Code of Federal Aviation Regulations (14 CFR), (Federal Aviation Regulation):

1. Flight Time: Time from the moment the aircraft first moves under its own power for the purpose of flight until the moment the aircraft comes to rest at the next point of landing (block to block time).

2. Flight Simulation Training Device (FSTD): A Full Flight Simulator (FFS) or a Flight Training Device (FTD).

3. Full Flight Simulator (FFS): A replica of a specific type, make, model, or series aircraft. It includes the equipment and computer programs necessary to represent aircraft operations in ground and flight conditions, a visual system providing an out-of-the-flight deck view, a system that provides cues at least equivalent to those of a three-degree-of-freedom motion system, and has the full range of capabilities of the systems installed in the device as described in (14 CFR) Part 60 and the qualification performance standard (QPS) for a specific FFS qualification level.

4. Flight Training Device (FTD): A replica of aircraft instruments, equipment, panels, and controls in an open flight deck area or an enclosed aircraft flight deck replica. It includes the equipment and computer programs necessary to represent aircraft (or set of aircraft) operations in ground and flight conditions having the full range of capabilities of the systems installed in the device as described in (14 CFR) Part 60 and the qualification performance standard (QPS) for a specific FTD qualification level.

5. Crew Concept: When one inspector/pilot is receiving pilot-in-command (PIC) training in a simulator/training device, the other inspector/pilot shall receive second-in-command training or flight engineer training (if applicable). When one inspector/pilot is receiving PIC training in the left seat of an airplane flight deck the other inspector/pilot shall receive observer time (flight deck seating permitted). No additional charge shall be made for the presence of, or instruction provided to, such additional FAA inspector/pilot.

6. Approved Training Program: The contractor’s FAA approved training course to include a (14 CFR) Part 121 or Part 135 training program, a (14 CFR) Part 141 training course outline, or a (14 CFR) Part 142 course. The contractor must provide documentation of approved training programs by submitting one of the following items: a signed approval letter from the Principal Operations Inspector who approved the training program, the approved course syllabus, or the training specifications paragraph authorizing the training course.

7. Duty Day / Training Day: Begins when the student first shows up at the contractor facility for training each day and runs continuously for a maximum of 10 hours including any breaks.

E. APPLICABLE DOCUMENTS

FAA Order 4040.9 or as revised and available for download, in pdf format, from www.faa.gov

FAA Airline Transport Pilot and Type Rating for Airplane, Airman Certification Standards (ACS). This ACS is published by the U.S. Department of Transportation, Federal Aviation Administration, Airman Testing Standards Branch, AFS-630, P.O. Box 25082, Oklahoma City, OK 73125. It is also available for download, in pdf format, from www.faa.gov

Title 14 of the Code of Federal Regulations (14 CFR), (Federal Aviation Regulations), Parts 61, 121, 135, 141, and 142. The applicable regulations are available for download, in pdf format, from www.faa.gov/regulations_policies/faa_regulations/

F. GENERAL REQUIREMENTS

1. GENERAL

(a) The FAA requires inspectors/pilots to obtain Initial training in the IA- Jet Westwind 1124 aircraft. The contractor must train FAA inspectors/pilots using only an approved training program, as specified in section D. – Definitions, 6 – Approved Training Program of this performance work statement (PWS).

Inspectors/pilots enrolled in the Recurrent course will meet the currency requirements of FAA Order 4040.9. The contractor will provide the number of hours of ground school, flight training device (if applicable), and full flight simulator (FFS) http://www.faa.gov/ http://www.faa.gov/ http://www.faa.gov/regulations_policies/faa_regulations/ they propose so the inspector/pilot can obtain the recurrent type rating as specified in Section 2 (Qualifications) of this PWS and required by (14 CFR) FAR Part 61. The contractor must provide as a minimum the number of training hours contained within their FAA-approved training program. The contractor is requested, within the limits of their approved program, to delete company-specific training such as employee/customer relations, filling out company forms, evacuation training, company communications, or other items not directly related to the completion of the aircraft training and substitute training directly related to the successful completion of the proficiency check.

(b) The FAA will enroll one inspector/pilot per class. It should be noted that the contractor proposed full flight simulator, flight training device, or aircraft times per inspector/pilot in the captain’s position (left seat). For example, during initial training, a course of 6 hours of simulator time per inspector/pilot would mean a total of 12 hours of simulator required for a two inspector/pilot class. When the FAA enrolls only one Inspector/Pilot per class, the FAA understands additional supplementary training may be required. Supplementary training must be approved in advance on a case-by-case basis by the Contracting Officer. The contractor should account for modifications to the number of hours required to complete this training for a single pilot. All simulator time is considered “wet”, consisting of the simulator and the required complement of instructors required by the contractor's approved training program or required by the PWS. This is to include the hours used for any flight check.

(c) Training of FAA inspector/pilot is not to be conducted between the hours of midnight and 6:00 a.m., including simulator/flight pre and post-briefings. A maximum of four (4) hours of simulator/flight instruction per day or eight (8) hours of ground school per day per inspector class is permitted. If ground and simulator/flight instruction are combined in a single day then a maximum of ten (10) hours of training per day is permitted (reference Duty / Training Day in definitions).To maintain continuity between simulator/flight training sessions, the contractor is requested to minimize the switching of simulator/flight instructors between sessions.

(d) FAA personnel do not ordinarily operate the aircraft in which they are rated on a regular basis. Therefore, it is necessary that they receive the most complete review possible when attending recurrent training. If the contractor's approved program allows for a partial review of systems and procedures during successive recurrent training periods, it is required that the contractor supplement their approved program to achieve a complete review for FAA inspectors/pilots during each recurrent course.

(e) FAA personnel are usually performing other job functions prior to assignment to training and normally do not have time to devote to pre-course study.

Additionally, due to circumstances beyond the control of the FAA or the inspector/pilot, an inspector/pilot may be assigned to training with short notice. If the contractor's approved program requires pre-course study prior to the trainee's arrival at the contractor's training facility, the contractor must contact the student in writing and inform them of the study requirements. The contractor will provide the student with all course materials required to complete the home study. The contractor must provide the student with a study syllabus. Once the student arrives at the contractor facility for training, the contractor will determine if the student has completed the home study and obtained sufficient knowledge to continue with the course. If the student has not completed the required home study, the contractor will immediately notify the Contracting Officer’s Representative (COR). The contractor shall include in the cost of the course all materials provided to the student, however, the contractor shall not be reimbursed for the time the student spends in home study.

(f) If the contractor's approved training program is specific to an all-cargo aircraft configuration, the contractor is required to supplement their approved program with ground instruction covering differences with a passenger-carrying configuration of the aircraft. Similarly, when the contractor's program is specific to an all passenger configuration, the contractor is required to supplement their program to cover differences with all-cargo configurations.

(g) All Full Flight Simulator training proposed by the contractor, at a minimum, must be conducted in an FAA-approved level C full flight simulator (FFS). The contractor may utilize an approved level 6 or 7 flight training device (FTD) or a level A, B, C, or D FFS for required FTD time. Any level FTD time may be substituted for the minimum required ground school time. Flight Simulation Training Device pre/post briefing may be considered as ground school training. The contractor's approved training program must allow any substitutions the contractor makes.

(h) Inspectors/pilots attending training under this contract/purchase order should present the contractor with a copy of FAA Form 4040-2, FAA Crewmember Check Record, signed by the inspector’s supervisor. If the form is presented, the contractor’s instructor, training center evaluator (TCE), or the FAA inspector administering a practical test or an instrument proficiency check shall complete the form and return it to the inspector.

2. QUALIFICATIONS

(a) INITIAL PILOT QUALIFICATION:

The contractor shall provide the ground school, full flight simulator, and/or aircraft to enable the FAA inspector/pilot to pass the pilot-in-command (PIC) proficiency check to ATP Standards on the subject aircraft, in accordance with the applicable (14 CFR) Part 61.58(d) (1), requirements, the contractor’s FAA-approved training program, and the terms and conditions provided herein. Flight Simulation Training Devices and flight training shall conform to the principle of “Crew Concept.”

Types of training shall include the following categories:

1. Initial pilot qualification ground school, and;

2. Initial pilot full flight simulator training when all training is to be conducted in a full flight simulator or;

3. Initial pilot flight training when all fight training is to be conducted in an aircraft

(b) RECURRENT PILOT QUALIFICATION:

The contractor shall provide the ground school and full flight simulator to enable the FAA inspector/pilot to pass a pilot-in-command (PIC) proficiency check to Airline Transport Pilot (ATP) standards on subject aircraft, in accordance with (14 CFR) Part 61.58(d) (1), the contractor’s approved training program, and the terms and conditions of the resulting contract/task order. Flight Simulation Training Device shall conform to the principle of “Crew Concept.”

Types of training shall include the following categories:

1. Recurrent pilot ground school and;

2. Recurrent pilot full-flight simulator training when all training is to be conducted in a full-flight simulator.

(c) SUPPLEMENTARY TRAINING HOURS:

The Contracting Officer may authorize hours in addition to those specified under Recurrent Pilot Qualification training when required by the individual inspector/pilot to successfully complete type rating practical tests or proficiency checks. These hours shall be provided at the prices set forth in the item entitled “Supplementary Training Hours”, Part I, Schedule B (Schedule B).

(d) DIFFERENCES TRAINING:

When required, the contractor shall provide all training necessary to operate a variant aircraft of the same make and model as the referenced aircraft in accordance with the contractor’s approved training program and the terms and conditions provided herein. All flight training shall conform to the principle of “Crew Concept.”

Types of training may include any of the following categories:

1. Aircraft ground school

2. Flight training device training

3. Full flight simulator training

4. Flight training

3. TRAINING REQUIREMENTS

(a) All instructions must comply with the contractor's approved training program.

(b) Flight simulation training device (FSTD) training, if applicable, shall begin within one working day after satisfactory completion of ground school. Flight training shall begin within one working day after completion of ground school or FSTD training, if applicable. Flight and FSTD training may be integrated with ground school training if it is a part of the contractor's program.

(c) Ground school instruction shall be presented by a qualified instructor in a classroom environment. If Computer-Based Instruction (CBI) is used to accomplish ground school training then the following requirements shall be met:

(1) Inspectors/pilots shall receive a thorough briefing on the operation and use of the CBI equipment.

(2) At least one instructor shall be present or readily accessible by electronic means to resolve any problems or questions that the inspector/pilot may have regarding the material presented in the CBI program.

(3) All material presented by CBI shall be reviewed and reinforced by a qualified instructor in classroom discussion or one-on-one with the inspector/pilot.

(d) Upon scheduling an FAA inspector/pilot for training the contractor shall contact their FAA certificate holding office in order to arrange for the applicable check to be given by an FAA inspector qualified in the aircraft. The contractor shall make the applicable FSTD or aircraft and appropriate personnel available for the purpose of administering the check(s) required. If the contractor’s FAA certificate holding office is unable to provide a qualified inspector for the required check(s), the contractor shall immediately notify the Contracting Officer’s Technical Representative (COR).

(e) In the event the FAA inspector/pilot fails to report for training as scheduled, or should become ill, injured or incapacitated during the training period the contractor shall promptly notify the COR and the inspector/pilot’s emergency contact if known.

(f) If the inspector/pilot has not passed the applicable pilot practical test or proficiency check after completing the training outlined in Schedule B and in accordance with the specifications herein, the contractor shall withhold further training and promptly notify the COR who will arrange the authorization of additional training.

(g) The contractor shall notify the COR of the inspector’s/pilot’s completion status upon the conclusion of the training program.

(h) Upon completion of all training, the contractor shall issue a Certificate of Training (Appendix A). The FAA inspector shall sign the certificate verifying the type of training provided, specific dates, and the duration of such training. One copy of each such certificate shall be submitted to the COR. Appendix A must be received prior to payment of invoice.

(i) The contractor shall furnish all training aids and facilities which meet the following minimum requirements:

(1) Sufficient chalk dry-erase or electronic boards for effective teaching shall be provided.

(2) All training aids, including any audio-visuals, mockups, charts or aircraft components listed in the approved training program must be accurate and appropriate to the course for which they are used.

(3) The classroom shall be well-lighted.

(4) Inspectors/pilots shall be seated at suitable tables which provide sufficient space for writing and accomplishing assigned tasks.

(5) The classroom shall be kept clean.

(6) Sanitary restroom facilities shall be available within convenient distance of the classroom.

(7) The classroom facilities shall be adequately ventilated, heated in winter, and cooled in summer.

(8) Ambient noise shall be below the distraction point. The instructor's voice level shall be easily heard from any position in the classroom.

(9) The contractor shall comply with safety standards specified by the National Electrical Code, the National Fire Code, and the United States of America Standards Institute in conducting contract training.

(10) Local environmental distractions adversely affecting student learning shall be eliminated.

(11) A copy of the aircraft Pilot’s Operating Handbook (POH) shall be provided each inspector/pilot on the first training day of each training course for the subject aircraft and shall be retained by the inspector/pilot. A "Flight Training Manual" utilized in the contractor's training program which is at least equal in content and quality to the POH will be an acceptable substitute. Such manuals shall be included within the prices set forth in Part I, Schedule B.

(12) A copy of the syllabus, training schedule and description of all maneuvers and procedures to be conducted in the training course shall be provided each inspector/pilot on the first training day of each training course.

(13) A FAA-approved full flight simulator (FFS) of the type specified in Paragraph F

(1) (f) of this PWS, if applicable.

(14) Sufficient aircraft inventory for use in the training course to ensure the availability of backup aircraft when maintenance is necessary. All aircraft shall be airworthy and certified in the normal category by the FAA

(15) The contractor shall use only instructors authorized under their approved training program to instruct under this contract. All instructors used in simulator training under this contract shall be authorized by the contractor to conduct all maneuvers and procedures required.

(j) The contractor's personnel, alone, shall be in command of the aircraft utilized in contract performance. At no time shall an FAA inspector/pilot be permitted to assume such command.

(k) The contractor shall provide all fuel, oil, landing fees, storage, and tie-down service. The contractor shall pay for all of these items and for any other costs related to operation and utilization of each aircraft provided by the contractor for training, reimbursement for which shall be deemed included in the contract price.

(l) Each aircraft provided by the contractor shall be operated and maintained in accordance with applicable FAA regulations.

G. DELIVERABLES

The contractor shall:

• Provide training as specified in their approved training program.

• Provide the hours and days of training proposed.

• Commence training upon the inspector/pilot’s arrival at the contractor’s facility on the date and time agreed upon.

• Provide each inspector/pilot with a POH or substitute in compliance with section F (3) (i) (11) of this PWS.

• Provide a copy of the syllabus, training schedule, and description of all maneuvers and procedures to be conducted in the training course to each inspector/pilot on the first training day of each training course in compliance with section F (3) (i) (12) of this PWS.

• Complete the training within the proposed number of training days barring unforeseen circumstances beyond the control of the contractor.

• Provide the COR with a completed certificate of training signed by both the inspector/pilot and the contractor’s instructor and the course critique (Appendix A) upon completion of the training.