I.P-2 BAG REQMT GRIT 5350-HM-CN1-4678.pdf

This document is a product specification sheet for an abrasive grit bag (LSN 5350-HM-CN1-4678) designed to contain sandblast utility grade abrasive material meeting MIL-PRF-22262(LATEST) standards with a 2,000 lb capacity per one-ton bag and 5:1 safety factor.

The bag features a tubular design constructed from 190 GSM or 5.5 oz per square yard minimum thickness uncoated fabric with UV treatment. Key structural components include a 14 x 18 inch inlet spout with web tie (plain duffle top acceptable), a 1.5-inch white pick-up point perimeter band, a 10 x 20 inch outlet spout with star closure featuring a protective flap cord rope, and a 3.0 mil minimum thickness LDPE inner liner attached with eight tabs. The bag includes a large rope lock on the outer closure, four pickup point loops positioned 4/10 inch above the bag, and two 12 x 12 inch zip lock pouches sewn into the top seam on the same side as any printed company logo without covering printed information. Each sack must be marked with stock number 5350-HM-CN1-4678 and batch or lot number, with matching documentation and certificates of conformance for all batches/lots supplied. Vendors are required to insert fiberboard or plywood between each bag and pallet to prevent sagging and puncture damage from lifting forks, exercising proper dunnage and shoring precautions during stacking for shipment. The specification was most recently revised on 7/5/2022, reducing outer bag fabric weight from 220 gsm to 190 gsm and adding plain duffle top as an acceptable alternative to the standard inlet configuration.