I. 14.1. CDRLS_Redacted (Exhibit A).pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188).

Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0003 A TDP X TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

EEA FAT Test Set 1301010872 Bloomy Controls Inc.

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

17. PRICE GROUP

A001 PRODUCT DRAWINGS/MODELS AND ASSOCIATED LISTS N/A

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

DI-SESS-81000E (SEE BLOCK 16) SOW 4.1.1 NUWCDIVNPT Code 8521

7. DD 250 REQ 9. DIST STATEMENT 10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

DD REQUIRED ONE/R SEE BLOCK 16 b. COPIES

8. APP CODE

D (SEE BLOCK 16)

11. AS OF DATE 13. DATE IF SUBSEQUENT

SUBMISSION a. ADDRESSEE Draft Final A N/A SEE BLOCK 16 Reg Repo

16. REMARKS 1 1 0

BLOCK 4: Attached TDP Option Selection Worksheet provides specific requirements.

BLOCK 8: Allow 15 days after PDR and CDR events for Government review and approval/disapproval. If no comments are generated on the draft submittal during Government review, the draft submittal shall be considered the final. If disapproved, the Contractor shall resubmit within 15 days of receipt of Government comments, addressing/incorporating Government comments. Allow 15 days for Government review and approval/disapproval upon resubmission by the Contractor.

BLOCK 9: See Attached Addendum.

BLOCKS 10, 12, & 13: The first TDP shall be submitted 5 days prior to PDR and 5 days prior to CDR. The subsequent TDP’s shall include redlined versions of all updated documents highlighting changes from the last approved release.

BLOCK 14: Media Requirements: Distribution and submittal shall be made electronically in the formats specified by the TDP Option Selection Worksheets.

15. TOTAL -----------> 1 1 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

7/19/2022

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED.

TDP OPTION SELECTION WORKSHEET

SYSTEM: MK 48 MOD 7 APB 6/TI-1 DATE PREPARED:

A. CONTRACT NO.

1301010872

B. EXHIBIT/ATTACHMENT NO.

A

C. CLINS

D. CDRL DATA ITEM NO.

A001

1. TDP Level (X and complete as applicable.)

A. CONCEPTUAL LEVEL

DEVELOPMENTAL LEVEL

PRODUCTION LEVEL

B. REMARKS:

2. TYPE AND FORMAT (X all that apply and complete as applicable) A.

TYPE 2D: 2D DRAWINGS

TYPE 3D: 3D MODEL ONLY

TYPE 3D: 3D MODELS WITH

ASSOCIATED 2D DRAWINGS

B.

NATIVE CAD (SPECIFY TYPE) __**SEE BLOCK 8** _______________________

ISO 10303 STEP FORMAT (Specify STEP PROTOCOL AP203, AP 214 etc.)

________**SEE BLOCK 8**_______________________________________________________

ISO32000 PORTABLE DOCUMENT FORMAT: __**SEE BLOCK 8**

OTHER ELECTRONIC FORMAT (SPECIFY TYPE)

HARDCOPY:

REMARKS: _________________________________________________________

3. CAGE Code AND DOCUMENT

NUMBERS

A. CONTRACTOR CAGE AND DOCUMENT NUMBERS

GOVERNMENT CAGE (COMPLETE 3B & 3C OR 3D)

D. To Be Assigned By:

NUWCDIVNPT

B. USE CAGE CODE: C. USE DOCUMENT NUMBERS:

4. DRAWING FORMATS (X one and complete as applicable)

CONTRACTOR FORMAT.

GOVERNMENT FORMAT.

REMARKS: __________________**SEE BLOCK 8** _________________________________________________________________________

5. TDP ELEMENTS REQUIRED (X all that apply)

ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR-OR THE FOLLOWING ARE REQUIRED:

CONCEPTUAL DRAWINGS/MODELS AND ASSOCIATED LISTS

DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS

PRODUCT DRAWINGS/MODELS AND ASSOCIATED LIST

COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LIST

QUALITY ASSURANCE PROVISIONS

SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS/MODELS AND ASSOCIATED LISTS

SPECIFICATIONS

SOFTWARE DOCUMENTATION

SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS/MODELS AND ASSOCIATED LIST

6. ASSOCIATED LISTS (X and complete as applicable)

A. PARTS LIST (X ONE) (1) INTEGRAL (2) SEPARATE

B. DATA LIST (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

C. INDEX LIST (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

D. WIRINGLIST (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

E. INDENTURE DATA LIST (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) F. APPLICATION LISTS (X ONE) (1) NOT REQUIRED (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

7. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

ASME Y14.100 ENGINEERING

DRAWING PRACTICES WITH

APPENDICES

B C D E

ASME Y14.24 TYPES AND APPLICATIONS OF ENGINEERING

DRAWINGS

ASME Y14.34 ASSOCIATED LIST

ASME Y14.35 REVISION OF ENGINEERING DRAWINGS AND

ASSOCIATED LIST

ASME Y14.41 DIGITAL PRODUCT DATA PRACTICES

ASME Y14.5 DIMENSIONING AND TOLERANCES

OTHER STANDARDS APPLY AS

DESCRIBED:

COMPANY STANDARDS PERMITTED:

YES NO

8. OTHER TAILORING

DD FORM 1423

CONTRACT DATA REQUIREMENTS LIST

PR 1301010872

BLOCK 16 ADDENDUM

BLOCK 9: The following information is specifically included in amplification of the Block 9 Distribution Statement selected:

Distribution Statement paragraphs are in addition to CLASSIFICATION markings of the data.

DISTRIBUTION STATEMENT D. Distribution authorized to the Department of Defense and U.S. DoD contractors only. Critical Technology, 9 August 2011. Other requests for this document shall be referred to Naval Undersea Warfare Center Division, Newport, Code 85, 1176 Howell Street, Newport, RI 02840

CDRLS: A001 – A003

The following “EXPORT CONTROL WARNING NOTICE” must be used in conjunction with DISTRIBUTION STATEMENTS identification in all CDRL Items.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C.Sec.

2751 et seq) or the Export Administration Act of 1979; as emended, Title 50, U.S.C., App 2401 et seq. Violations of these export laws are subject to severe criminal penalties, Disseminate in accordance with provisions of DoD Directive 5230.25.