corrected_SPECIFICATIONS.pdf

RFQ HSSS01-15-Q-0411

SPECIFICATIONS AND REQUIREMENTS

HARLEY DAVIDSON MOTORCYCLES

MODEL FLHTPI (WITH ABS) YEAR 2015 (or most current model available)

These specifications are intended to describe the mechanical, safety, and comfort requirements for solo, certified traffic enforcement motorcycles, which will be used by the U. S. Secret Service, Presidential Protective Division to provide motorcade escorts during all types of weather to include rain and snow.

MOTORCYCLE SPECIFICATIONS

1) Engine – Shall be not less than two (2) cylinders with a minimum piston displacement of not less than 103 cubic inches. Engine shall be designed to ensure that any vibration frequencies and magnitudes shall be minimal. Engine and transmission isolated from motorcycle frame through a rubber mounting system. Shall be overhead valve, equipped with hydraulic lifters and fuel injected.

2) Electrical system - The electrical system shall be nominal twelve (12) volt complying with the following:

A. Battery – Sealed, heavy duty maintenance free, center mounted. Twelve (12) volts minimum rated capacity – Twenty eight (28) ampere hours per Battery Council International (BCI) rating, cold cranking amps

B. Ignition – Non-waste spark, alpha control C. Charging system – Forty five (45) amp high output alternator and voltage regulator D. Connections – Industrial grade throughout; an electrical accessory connection shall be provided E. Hand controls – water resistant switches shall be provided F. Starting system – Twelve (12) volt starter with solenoid operated engagement and relay required G. Horn – Horn that will emit a sound level adequate to be heard above motorcycle and traffic generated noise level required.

H. Lighting – Each motorcycle shall be provided with the following lighting equipment:

1. Quartz halogen headlight

2. Pursuit lamps, per accessory list

3. Tail light

4. Turn signals (self canceling)

5. Flashers, four (4) way

3) Clutch – Left hand operated, multiple disc, wet plate clutch capable of offering slip control when motorcycle is operating at low speeds for prolonged periods. Requires clutch disengaged for starter motor operation; low effort hand levers

4) Transmission – Shall be six (6) forward speeds of the constant mesh design with the shift lever mounted on the left side of the engine and extending upward to be easily accessible to the operators left foot. Greaseless shifter shaft with anti-vibration rubber spacers.

5) Brakes – Disc brakes shall be provided for both front and rear wheels. Front brakes shall have dual 11.5 inch diameter drilled discs; rear brake shall be single disc. Brakes shall be relatively free from heat fade, have four (4) piston calipers and uniform expanded rotors.

6) Frame – Shall be reinforced double loop, trussed and welded, (unitized body not accepted).

Minimum wheel base of 63 inches.

1 | P a g e

7) Suspension – Shall be heavy duty (front and rear); with the ability to adjust rear ride height to compensate for imposed loads. The rear suspension shall have swing arms having bearings that require no lubrication for life of the motorcycle.

8) Drive assembly – Engine to transmission by automatically lubricated ½” pitch double row chain.

Transmission to rear wheel (final drive) shall be belt drive.

9) Visual displays – Shall have a speedometer certified analog to indicate 0 – 120 mph, odometer, tachometer, fuel level gauge, pursuit lamp indicator, sight glass on brake master cylinder, and a low fuel indicator lamp.

10) Oil and fuel capacity – Gas tank capacity shall be a minimum of five (5) gallons and must include a reserve feature. Oil reservoir shall hold a minimum of four (4) quarts.

11) Wheels/tires – Shall have cast wheels with a rim material impermeable to compressed air.

Sealed automotive style wheel bearings requiring no end play adjustment and service interval of 100,000 miles. Tubeless type tires to have a non skid tread, designed to operate on paved highways and shall have a full four ply fabric reinforcement with a bead retention design to remain on wheel during sudden loss of air pressure.

12) Feature requirements – A. Seat – Leather or equal durable material, foam rubber padded, single saddle type with adjustable air bladder B. Jiffy stand – Shall be designed that if holdback spring is lost or broken, contact with the roadway will tend to spring it aside and not serve as a lever for throwing the operator.

C. Foot boards – Adjustable and provided with non skid rubber pads on upper surfaces D. Engine guards – Front engine guard E. Saddlebags – Factory installed, law enforcement type fiberglass saddlebags. Bags shall be nominally waterproof and utilize police style speed latches F. Fairing and windshield – Fork mounted fairing with windshield; windshield shall be of latest design, utilizing Lexan or clear polycarbonate G. Mirrors – Two (2) true image mirrors shall be provided for each motorcycle H. Keys – One key fits all locks I. Warranty – Twenty four (24) months, unlimited mileage J. P. A. plug in - needs to be installed on right side of fairing underneath voltage gauge

13) Lighting Package – per attached accessory list (Att1)

14) Nonstandard equipment - per attached equipment list (Att2)

2 | P a g e

ATTACHMENT 1/LIGHTING PACKAGE

THIS ATTACHMENT CONTAINS A LIGHTING PACKAGE FOR ONE (1) 2015 (or most current model)

HARLEY DAVIDSON FLHTPI MOTORCYCLE (BIRCH WHITE). THIS EQUIPMENT DOES NOT COME

STANDARD. THE EQUIPMENT WILL EITHER REPLACE THE STANDARD PART OR WILL BE

ADDED TO THE MOTORCYCLE. (Equipment shall be 2015 or most current model to match the motorcycle)

ITEM PART # UNIT

Front Upper Zone of Motorcycle:

Whelen Par36 Extended Lens Super LED Light Head Red, Mounted in Standard Par 36 Chrome Housing next to Head Light

2ER00ZRR 1 EACH

Whelen Par36 Extended Lens Super LED Light Head Blue, Mounted in Standard Par 36 Chrome Housing next to Head Light

2EB00ZBR 1 EACH

Whelen ION Super LED Light Head, Red, Mounted to front fairing IONR 1 EACH

Whelen ION Super LED Light Head, Blue, Mounted to front fairing IONB 1 EACH

Rear and Sides of Motorcycle:

Whelen 90 Degree Fog Lamp Bracket RBKTHD7 2 EACH

Whelen LINZ6 Red/Blue Split Light head, one mounted in each

RBKTHD7.

LINZ6J 2 EACH

Whelen 100 Watt Siren Amplifier for Motorcycle WS321 1 EACH

Whelen WS321 Mounting Bracket for 2015 Harley Davidson Electra - Glide

WS321B14 1 EACH

Whelen 100 watt siren Speaker for Harley Davidson SA350MH 1 EACH

Whelen 2015 Harley Davidson Mounting bracket for SA350MH Speaker SA350MB1 1 EACH

Whelen Harley Davidson Motorcycle Box Configured with Six M4 Series, Rear Open. 3 Red M4’s, 3 Blue M4’s, All Colored Lenses

M4B6B 1 EACH

Whelen Battery Separation Plate M4BSEP 1 EACH

Motorcycle Battery M1BATT 1 EACH

Battery Charger M4B6CHRG 1 EACH

Ground Plate M1GROUND 1 EACH

Adaptor Plate for Whelen Motorcycle Box to fit 2015 Harley Davidson Electra-Glide

MBADPT14 1 EACH

Whelen Dual LINZ6 Side Crash Bar Mounting Bracket. One Mounted on Each Side of Motorcycle

RBKTHD2 2 EACH

Whelen Dual LINZ6 Rear Crash Bar Mounting Bracket. One Mounted on Each Side of Motorcycle

RBKTHD9 2 EACH

Whelen LINZ6 Super LED Light Head Red, one light head mounted in each RBKTHD2 & RBKTHD9 bracket

LINZ6R 4 EACH

Whelen LINZ6 Super LED Light Head Blue, one light head mounted in each RBKTHD2 & RBKTHD9 bracket

LINZ6B 4 EACH

3 | P a g e

ATTACHMENT 2/NONSTANDARD EQUIPMENT

THIS ATTACHMENT CONTAINS EQUIPMENT FOR ONE (1) 2015 (or most current model) HARLEY

DAVIDSON FLHTP MOTORCYCLE (BIRCH WHITE). THIS EQUIPMENT DOES NOT COME

STANDARD. THE EQUIPMENT WILL EITHER REPLACE THE STANDARD PART OR WILL BE

ADDED TO THE MOTORCYCLE.

ITEM PART # UNIT

AIR DEFLECTOR KIT 58166-08 1 EACH

MID-FRAME AIR DEFLECTORS 58022-07A 1 EACH

WINDSHIELD MOLDING 59213-96 1 EACH

FRONT AXLE NUT COVER 44117-07A 1 EACH

H/D GRIPS 56459-08 1 EACH

SADDLE BAG GUARD RAILS 90200561 1 EACH

KERKER SLIP-ON MUFFLERS 128-78020 1 EACH

KERKER MUFFLER END CAPS 108-7257 1 EACH

TALL WINDSHIELD 57400228 1 EACH

RUN, BRAKE, TURN SIGNAL KIT 69462-06D 1 EACH

4 | P a g e