CONTINUATION_OF_SF_1449.docx_Page_3__Revision_1.docx

HSCG85-13-Q-P45211

USCGC ELDERBERRY (WLI-65401)

ENGINE OVERHAUL DOCKSIDE REPAIR

REVISION 1

CONTINUATION OF SF 1449 – BLOCKS 17a - 25

(1) Block 17a: Contractor shall include DUNS number.

(2) Block 17b: REMITTANCE ADDRESS: Payment will be made to the Financial Institution listed in Central Contractor Registration (CCR). To receive award contractor must be registered in Central Contract Registration (CCR) http://www.ccr.gov.

(3) Block 19 through 24: SEE SCHEDULE OF SUPPLIES/SERVICES BELOW.

(4) Block 25: ACCOUNTING AND APPROPRIATION DATA: To be included on contract award document.

This is a solicitation for commercial items in accordance with FAR Part 12, Acquisition of Commercial Items. Solicitation number HSCG85-13-Q-P45211 is issued as a Commercial Request for Quotation (RFQ). HSCG85-13-Q-P45211 and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 05-49. This requirement is being solicited as a Total Small Business Set-aside. The Small Business Size Standard for NAICS Code 336611 is 1000 employees. a single Firm-Fixed Price Purchase Order or Contract are anticipated. The anticipated award date is on or about November 30, 2012. Work covered by this solicitation shall be completed within the date the vessels become available to the contractor as indicated in the following Schedule: USCGC ELDERBERRY (WLI-65401) available: January 10, 2013 through January 31, 2012 completed twenty-one days (21) after vessel becomes available. Place of Performance is at the Cutter’s Home Port: 107 Dockside Street, Petersburg, Alaska 99833. For access to the Cutter, please contact: MKC Cameron Peterson at email: Cameron.P.Peterson@uscg.mil or phone: ((907) 772-4225. The government intends to award from this solicitation to the responsible vendor whose quote conforming to the solicitation provides the best value.

DESCRIPTION OF WORK

USCGC ELDERBERRY (WLI-65401): Contractor will provide all parts, equipment, and special tools to perform all the work. Technical representative(s) will perform a Center Section Overhauls on two (2) Detroit Diesel Model 371 two cycle diesel engines. In accordance with attached Specification For #1 and # Ships Service Diesel Generators Center Section Overhauls FY2012 “Rev-0, 17 October 2012”. Work is to be conducted in frame. Technical representatives will verify with ships force prior to and following completion of overhaul the proper operation of the Generator.

CERTIFICATIONS

The Contractor shall provide the services of qualified Tech Reps for the Detroit Diesel Model 3-71 equipment/system.

All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory coed performance qualification procedures.

Each offeror shall furnish the information required by the solicitation.