AMENDMENT_0001.RFP_HSCG4013R11011.pdf

CONTINUATION SHEET REFERNCE NO OF DOCUMENT BEING

CONTINUED

RFP: HSCG40-13-R-11011 DATED JANUARY 23, 2013

AMENDMENT NO: 0001

PAGE

NAME OF OFFEROR OR CONTRACTOR

Continuation of SF 30, Block 14, Page 1 of 2

2) POST THE FOLLOWING QUESTIONS AND ANSWERS RECEIVED IN RESPONSE TO SOLICITATION

HSCG40-13-R-11011:

QUESTION: Section 3.7.1.4 Describes a thermostatic bypass control of coolant. Can you please provide detail of what you are looking for?

ANSWER: NORMAL THERMOSTAT FOR ENGINE JACKET WATER COOLANT IS ALL THAT IS

REQUIRED.

QUESTION: Section 3.7.1.4b Describes isolation cut-out valves to permit removal of the cooler while at sea.

Can you please provide detail with a drawing of how the cooling system should be plumbed and how this system would be utilized?

ANSWER: ISOLATION CUT-OUT VALVES ARE EXTERNAL OF THE ENGINE. DIESEL-GENERATOR

SHALL BE FITTED WITH A RAW WATER COOLANT HEAT EXCHANGER, BUT ISOLATION CUT-OUT

VALVES FOR IT ARE NOT REQUIRED AS PART OF PROVIDED DIESEL-GENERATOR.

QUESTION: Section 3.7.1.5 Describes a spark arrestor type muffler. Can you please provide specifications of the Spark Arrestor muffler you would like incorporated?

ANSWER: VENDOR IS TO PROVIDE ACCEPTABLE MUFFLER SUITED FOR THEIR PROPOSED

DIESEL-GENERATOR. VENDOR MAY PROVIDE SPECS AND/OR TYPE OF MUFFLER FOR THEIR

DIESEL-GENERATOR AS PART OF PROPOSAL.

3) All other terms and conditions of this solicitation remain unchanged.

4) Acknowledgment of Amendment 0001 SHALL be submitted to the Shavonda Jamison, Contract Specialist at

Shavonda.Jamison@uscg.mil or fax to 757-628-4628 no later than Wednesday, February 13, 2013 3:00 pm EST.

NOTE: Acknowledgement of Amendment 0001 shall be accomplished by completing Block 8, 15A, 15B and

15C of Page 1 of the Standard Form 30.

mailto:Shavonda.Jamison@uscg.mil