The file's text, extracted by GovTribe without its formatting.
HSCG40-12-R-AG030
NOTICE FOR FILING AGENCY PROTESTS
United States Coast Guard Ombudsman Program
It is the policy of the United States Coast Guard (USCG) to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the Government Accountability Office (GAO).
Interested parties are encouraged to seek resolution of their concerns within the USCG as an Alternative Dispute Resolution (ADR) forum rather than filing a protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the Contracting Officer or Ombudsman.
Informal Forum with the Ombudsman. Interested parties who believe a specific USCG procurement is unfair or otherwise defective should first direct their concerns to the applicable Contracting Officer. If the Contracting Officer is unable to satisfy their concerns, interested parties are encouraged to contact the U.S. Coast Guard Ombudsman for Agency Protests. Under this informal process the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, Contracting Officer, and solicitation closing date (if applicable).
Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the Contracting Officer through open and frank discussions. If the protester’s concerns are unresolved, an Independent Review is available by the Ombudsman. The protester may file a formal agency protest to either the Contracting Officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency’s goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth in FAR 33.103(d) (2). If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. To be timely protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be submitted to:
COMMANDANT (CG-9131)
U S COAST GUARD
OMBUDSMAN PROGRAM FOR AGENCY PROTESTS
2100 2ND ST SW STOP 7112
WASHINGTON DC 20593-7112
The Ombudsman Hotline telephone number is 202.372.3695.
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS
OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30
1. REQUISITION NUMBER
2112402B4200AG030
2. CONTRACT NO.
3. AWARD/EFFECTIVE
DATE
4. ORDER NUMBER
5. SOLICITATION NUMBER
HSCG40-12-R-AG030
6. SOLICITATION
ISSUE DATE
| 7. FOR SOLICITATION INFORMATION CALL: |
| a. NAME |
Florence Harwood
b. TELEPHONE NUMBER (no collect calls)
410-762-6888
8. OFFER DUE DATE/ LOCAL TIME
9. ISSUED BY CODE 75174
Commanding Officer
USCG Surface Forces Logistics Center
Attn: Florence Harwood 705 E. Ordnance Rd.
Baltimore, MD 21226 Florence.M.Harwood@uscg.mil
10. THIS ACQUISITION IS FORMCHECKBOX
UNRESTRICTED OR
FORMCHECKBOX
SET ASIDE: 100 %FOR:
FORMCHECKBOX
SMALL BUSINESS
FORMCHECKBOX
WOMEN-OWNED SMALL
BUSINESS (WOSB)
HUBZONE SMALL
NAICS:
BUSINESS
ECONOMICALLY DISADVANTAGED
811219
WOMEN-OWNED SMALL (EDWOSB)
SERVICE-DISABLED
VETERAN-OWNED
SIZE STANDARD:
SMALL BUSINESS
8(A)
19.0 MM
11. DELIVERY FOR FOB DESTINATION UNLESS BLOCK IS MARKED
FORMCHECKBOX
SEE SCHEDULE
12. DISCOUNT
TERMS
FORMCHECKBOX
13a. THIS CONTRACT IS A RATED ORDER UNDER DPAS (15 CFR 700) 13b. RATING
14. METHOD OF SOLICITATION
RFQ FORMCHECKBOX
IFB FORMCHECKBOX
RFP
15. DELIVER TO CODE
See Description of Supplies/Services
16. ADMINISTERED BY CODE
Same as block 9
17a. CONTRACTOR/ CAGE CODE FACILITY
OFFEROR CODE
DUNS No.
TELEPHONE NO:
FAX NO:
18a. PAYMENT WILL BE MADE BY CODE U.S. Coast Guard Finance Center
P.O. Box 4122
Chesapeake, VA 23327-4122
FORMCHECKBOX
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED FORMCHECKBOX
SEE ADDENDUM
19.
ITEM NO.
20.
SCHEDULE OF SUPPLIES/SERVICES
21.
QUANTITY
22.
UNIT
23.
UNIT PRICE
24.
AMOUNT
Open, Inspect, Report and potential overhaul of various pumps in accordance with this Solicitation and the attached specification.
25. ACCOUNTING AND APPROPRIATION DATA
26. TOTAL AWARD AMOUNT (FOR GOVT USE ONLY)
FORMCHECKBOX
27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 & 52.212-5 ARE ATTACHED. ADDENDA FORMCHECKBOX
ARE FORMCHECKBOX
ARE NOT ATTACHED.
FORMCHECKBOX
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4, FAR 52.212-5 IS ATTACHED. ADDENDA FORMCHECKBOX
ARE FORMCHECKBOX
ARE NOT ATTACHED.
FORMCHECKBOX
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.
FORMCHECKBOX
29. AWARD OF CONTRACT: REFERENCE
OFFER DATED . YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
30a. SIGNATURE OF OFFEROR/CONTRACTOR
31a. UNITED STATES OF AMERICA (SINGATURE OF CONTRACTING OFFICER)
30b. NAME AND TITLE OF SIGNER
30c. DATE SIGNED
31b. NAME OF CONTRACTING OFFICER
31c. DATE SIGNED
AUTHORIZED FOR LOCAL REPRODUCTION
STANDARD FORM 1449 (Rev. 3/2011)
PREVIOUS EDITION IS NOT USABLE
Prescribed by GSA – FAR (48 CFR) 53.21
Table of Contents
DESCRIPTION:
PAGE
Standard Form 1449 (SF1449)
Table of Contents
Addendum to Standard Form 1449:
Blocks 19 – 26, Schedule of Supplies/Services
3-213
Block 15, Deliveries, Packaging and Marking
214-217
Contract Administration Data/Invoicing Requirements
218-220 Special Contract Requirements
Addendum to FAR Clause 52.212-4, Contract Terms and Conditions –
Commercial Items
222-227 FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement
Statutes or Executive Orders – Commercial Items
228-235 Addendum to FAR Provision 52.212-1, Instructions to Offerors –
236-240 Commercial Items
FAR Clause 52.212-2 – Evaluation- Commercial Items 241 Addendum to FAR Clause 52.212-2 – Evaluation- Commercial Items 242-243 FAR Provision 52.212-3 – Offeror Representations and Certifications –
244-261 Commercial Items
ATTACHMENTS:
Attachment I: Specification R-503-0519 for Pump Overhaul, USCG Medium Endurance Cutters (WMEC) Attachment III: DHS Form 700-5 Contractor Report of Government Property Attachment IV: Government Furnished Property Discrepancy Report
ADDENDUM TO STANDARD FORM 1449
THE SCHEDULE
DESCRIPTION/SPECIFICATION/WORK STATEMENT
Items 0001 through 4027 are for the Overhaul of various pumps and pump units, to be performed in strict accordance with USCG SFLC Specification R-503-0519 for Pump Overhaul of USCG Medium Endurance Cutters (WMEC).
NOTICE TO OFFERORS
***All questions regarding this solicitation MUST be submitted in writing. You may email them to Florence Harwood at Florence.m.harwood@uscg.mil. No inquiries will be answered verbally!!
Contractor’s shall not modify, change or update any part number or incorporate any notes into the solicitation. If a Contractor believes that any portion of this solicitation is incorrect, or an ambiguity exists, the Contractor shall notify the Contracting Office, in writing, prior to the date and time specified for receipt of proposals. Failure to follow this direction may render your proposal unacceptable and rejected.
IN ORDER TO BE TECHNICALLY ACCEPTABLE AND TO BE CONSIDERED FOR AN AWARD, OFFERORS ARE REQUIRED TO BE THE ORIGINAL EQUIPMENT MANUFACTURER (OEM), AN AUTHORIZED REPAIR FACILITY, OR A VERIFIABLE SOURCE THAT HAS PROVIDED THIS SERVICE IN THE PAST.
**SEE ADDENDUM TO 52.212-2, EVALUATION CRITERIA (PAGE 242), FOR MORE INFORMATION REGARDING THIS REQUIREMENT.
TYPE OF CONTRACT
This is a Requirements-Type Contract with one (1) Base Year and four (4) Option Years. A Requirements Type Contract is defined in FAR Clause 52.216-21 (Oct 1995). The period of performance will begin on the date of contract award and end one year afterward; each subsequent option year, if exercised, will begin one day after the end of the previous contract year and end one year thereafter. Multiple awards are anticipated.
ESTIMATED REQUIREMENTS/ QUANTITIES
The quantities shown in the attached Addendum to Blocks 19-24 of the Standard Form 1449 are estimates of the Coast Guard’s annual requirements for the base year and each corresponding option year. These estimated requirements are for information purposes only and shall not be considered as orders. However, the U.S. Coast Guard SFLC is obligated to order such quantities as may be needed to fill Coast Guard requirements for the overhaul(s) specified during the term of the contract. Except as otherwise provided for herein, the Contractor is obligated to deliver all such quantities as may be required to fulfill the requirements of each individual task order.
ORDERING/TASK ORDERS
a. Supplies and services will be ordered by the issuance of individual task orders. Refer to FAR Clause 52.216-18 Ordering, page 225.
b. Any supplies or services to be furnished under this contract shall be ordered by issuance of task orders by the following activity:
U.S. Coast Guard – Surface Forces Logistics Center WMEC Product Line (C&P1) 705 E. Ordnance Road Baltimore, MD 21226
c. All task orders issued hereunder are subject to the terms and conditions of this contract which shall control in the event of conflict with any task order.
d. The Contractor shall fill Task Orders in the same sequence in which they are received, unless otherwise instructed by the Contracting Officer.
OPTIONS
Each Option extending the term of this Contract shall be for a period of one (1) year from the effective date of each Option and shall be issued in accordance with FAR 52.217-9 (Mar 2000).
GOVERNMENT FURNISHED PROPERTY (GFP)
The Government shall provide only that property set forth below, notwithstanding any terms or conditions of the specification to the contrary. All property provided to the Contractor by the Government under this contract shall be subject to the Government Property clause of this contract. Actual quantities furnished will be determined on individual task orders.
NOTE: The Contractor’s property control system may be reviewed for approval, in accordance with Government Property requirements.
GFP/ITEM VALUE/EA.
Work Item 1: 270’ EDG Sea Water Cooling Pump Unit Overhaul, 4320-01-118-5085
$27,410
Work Item 2: 270’MDE/RG Lube Oil Transfer Pump Overhaul, 4320-01-106-7631 $12,573 Work Item 3: 270’ JP-5 Service Pump Overhaul, 4320-01-118-6394 $28,429
Work Item 4: 270’ Fuel Transfer Pump Overhaul, 4320-01-118-6395 $28,455
Work Item 5: 270’ A/C Chill Water Pump Unit Overhaul, 4320-01-121-9680 $24,000
Work Item 6: 270’ Auxiliary Sea Water Pump Unit Overhaul, 4320-01-122-3852 $66,100
Work Item 7: 270’ JP-5 Transfer Pump Overhaul, 4320-01-183-9557 $39,530
Work Item 8: 270’ Fire Pump Unit Overhaul, 4320-01-481-4914 $32,208
Work Item 9: 270’ Sewage Discharge Pump Unit, Overhaul 4320-01-131-0841 $10,401
Work Item 10: 270’ In-Port ASW Pump Unit Overhaul, 4320-01-339-6786 $22,865
Work Item 11: 270’ Reverse Osmosis HP Pump Overhaul, 4320-01-521-7356 $28,930
Work Item 12: 270’ Potable Water Service Pump Unit Overhaul, 4320-01-535-4782 $7,654
Work Item 13: 270/378 Sewage Discharge Pump Unit Overhaul, 4320-01-112-0008 $13,139
Work Item 14: 270’ FWD/AFT Waste Water Pump Unit Overhaul, 4320-01-131-6912 $9,914
Work Item 15: 270’ Chilled Water Circ Pump Overhaul, 4320-01-554-3286 $7,344
Work Item 16: 270’ Bilge and Ballast Pump Unit Overhaul, 4320-01-318-0826 $5,583
Work Item 17: 210’ Sewage Vacuum Ejection Pump Unit Overhaul, 4320-01-519-3163 $8,882
Work Item 18: 210’ Fuel Oil Transfer Pump Overhaul, 4320-01-230-6221 $10,250
Work Item 19: 210’ Fire Pump Overhaul, CW 4320-01-225-7493 $37,998
Work Item 20: 210’ Fresh Water Transfer Pump Unit Overhaul, 4320-01-203-5819 $7,392
Work Item 21: 210’ Bilge Pump Unit Overhaul, 4320-01-206-2611 $19,225
Work Item 22: 210’ Reverse Osmosis LP Pump Overhaul, 4320-01-422-0469 $2,667
Work Item 23: 210’ Sewage Discharge Pump Unit Overhaul, 4320-01-273-9350 $6,327
Work Item 24: 210’ Reverse Osmosis HP Pump Overhaul, 4320-01-503-5378 $4,502
Work Item 25: 210’ Fresh Water Service Pump Unit Overhaul, 4320-01-199-9751 $16,771
Work Item 26: 210’ JP5 Service Pump Overhaul, 4320-01-227-8866 $6,990
Work Item 27: 210’ Fire Pump Overhaul, CCW 4320-01-566-2626 $15,381
ADDRESS FOR SHIPMENT OF GOVERNMENT FURNISHED PROPERTY
Firm Name: _________________________________________
Street Address: ______________________________________
City, State, Zip Code: _________________________________
ADDENDUM TO STANDARD FORM 1449
THE SCHEDULE OF SUPPLIES/SERVICES
0001A - 4027A Receiving Inspection Report and Photo Documentation of crates and contents, submitted for each Pump/Pump Unit inducted for overhaul as outlined in Specification Number R-503-0519, Paragraph 3.4.1 and 3.6.
Not Separately Priced 0001B - 4027B Preliminary disassembly, Inspection and Condition Found Report (CFR) of each Pump/Pump Unit, and/or shipping container, as outlined in Specification Number R-503-0519, Paragraph 3.4.2.
0001C - 4027C Monthly Status Report to be submitted as outlined in Specification Number R-503-0519, Paragraph 3.7.
0001D – 4027D DHS 700-5 Contractor Report of Government Furnished Property
Not Separately Priced
BASE YEAR REQUIREMENTS
Each of the following Contract Line Item Numbers (CLINS) shall be priced to include:
Labor and materials for open, inspect and overhaul, including replacement of mandatory parts only, of each Pump/Pump Unit inducted for overhaul, including submission of all reports, photo documentation, preservation, packaging, marking, barcoding and preparation for shipment. See General Requirements and individual Work items of Specification R-503-0519.
NSN 4320-01-118-5085
270’ EDG Sea Water Cooling Pump Unit
Dresser Pump, P/N NY671190-Model-D1131 Unit Total
Price Price
Estimated Qty: 2 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset is determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 390033-01 |
| Lock washer, Impeller |
| 1 |
| 960185-01 |
| Ring, Adapter Cover |
| 1 |
| P03726-00 |
| Gasket, Impeller Screw |
| 1 |
| 390036-10 |
| Gasket, Impeller |
| 1 |
| 24292-00NA |
| Key, Impeller |
| 1 |
| 389013-00 |
| Gasket, Sleeve |
| 1 |
| 20A011CM022 |
| O-Ring, Shaft Sleeve |
| 1 |
| CF1SP-63731-1 |
| Mechanical Shaft Seal |
| 1 |
| 390007-01 |
| Gasket, Casing |
| 1 |
| 960455-10 |
| Gasket, Stuffing Box |
| 1 |
| 390090-00 |
| Gasket, Mechanical Seal Gland |
| 1 |
Stainless Steel
Comm’l Equivalent
Stainless Steel
Comm’l Equivalent
Stainless Steel
Comm’l Equivalent
| 806171-00 |
| Abrasive Separator Fitting |
| 5 |
| 806172-00 |
| Abrasive Separator Tubing |
| 6ft |
| 732A501AC-P1B35BC0 |
| Bearing, Ball, PE |
| 1 |
732A500AF-P25
25PC02XP
TOTAL OF MANDATORY PARTS FOR OVERHAUL $__________________
Contingency Replacement Parts:
| Part NO. |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 959943-01 |
| Cover, Stuffing Box |
| 1 |
TOTAL OF CONTINGENCY PARTS $__________________
NSN 4320-01-106-7631
270’ MDE/RG Lube Oil Transfer Pump
Curtis-Wright Electro-Mechanical- P/N 9210
Unit Total
Price Price
Estimated Qty: 1 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 2101020190 |
| Mechanical seal |
| 1 |
TOTAL OF MANDATORY PARTS FOR OVERHAUL $_________________
| Part NO. |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL
PRICE
| 0522710022 |
| Shaft, Drive |
| 1 |
| 0522720022 |
| Shaft, Driven |
| 1 |
| 0121590110 |
| Housing, Rear |
| 1 |
| 0121580110 |
| Housing, Front |
| 1 |
| 0915220003 |
| Spacer, Rotor |
| 4 |
| 3011420099 |
| Rotation arrow |
| 1 |
NSN 4320-01-118-6394
270’ JP-5 Service Pump
Worthington Pump, P/N SZD-1BM3DIA
Unit Total
Price Price
Estimated Qty: 2 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 1500440299 |
| Bearing, Roller |
| 2 |
| 1500440499 |
| Bearing, Inner Race |
| 2 |
| 1500060099 |
| Bearing, Ball |
| 2 |
| Type 9) |
| Mechanical Seal |
| 1 |
| SKF CRW1 R Series, Dual Lip Oil Seal |
| Seal-Front & Rear Bracket |
| 4 |
SKF CRW1 R
Series Dual
Lip Oil Seal
| Part Number |
| Description |
| Qty |
UNIT
PRICE
TOTAL PRICE
| 2902070421 |
| Retaining Pin |
| 4 |
| 920061124 |
| Spacer-Bearing & Timing Gear |
| 2 |
| 2710030271 |
| Locknut-Timing Gear |
| 2 |
| 2715010721 |
| Lockwasher-Timing Gear |
| 2 |
| 620015921 |
| Key-Timing Gear |
| 2 |
| 2300290021 |
| Snap Ring-Front Bracket |
| 2 |
| 2300500021 |
| Snap Ring-Rear Bracket |
| 2 |
| 2300270021 |
| Snap Ring-Rear Bracket |
| 2 |
| 000-2113920 |
| Rotation Arrow |
| 1 |
| 000-2113921 |
| Discharge Nameplate |
| 1 |
| 1323000021 |
| Screw-Nameplate |
| 4 |
| 1323160321 |
| Screw-Body to Bracket |
| 16 |
| 1304050221 |
| Screw-Bracket to Front Head |
| 8 |
| 1304050421 |
| Screw-Bracket to Rear Head |
| 8 |
Stainless Steel
Comm’l Equivalent
| 1210100221 |
| Breather Plug ¼ npt |
| 2 |
Stainless Steel
| 2902120321 |
| Dowel-Bracket to Body |
| 4 |
| 2902120121 |
| Dowel-Bracket to Front Head |
| 2 |
TOTAL OF CONTINGENCY PARTS $_________________
NSN 4320-01-118-6395
270’ Fuel Transfer Pump
Worthington Pump, P/N B7793014-1
Unit Total
Price Price
Estimated Qty: 3 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 1500380299 |
| Bearing, Roller |
| 2 |
| 1500380399 |
| Bearing, inner face |
| 2 |
| 1500020099 |
| Ball bearing |
| 2 |
| 2100560131 |
| Mechanical Seal |
| 4 |
| 2101590245 |
| Stationary seat |
| 4 |
| 0620010121 |
| Key-Coupling |
| 1 |
SKF CRW1 R
Series Dual
Lip Oil Seal
SKF CRW1 R
Series Dual
Lip Oil Seal
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 0521480112 |
| Shaft, Drive |
| 1 |
| 0521490112 |
| Shaft, Driven |
| 1 |
| 1910180112 |
| Rotor 3.25 Width |
| 2 |
| 3730690015 |
| Bracket-Rear |
| 1 |
| 3730700015 |
| Bracket-Front |
| 1 |
| 0917310052 |
| Restriction Bushing |
| 4 |
| 290207002 |
| Retaining pin |
| 4 |
| 920060124 |
| Spacer-Timing Gear |
| 2 |
| 620015721 |
| Key-Timing Gear |
| 2 |
| 2113920 |
| Arrow, Direction |
| 1 |
| 2113921 |
| Nameplate, Discharge |
| 1 |
Stainless Steel
Stainless Steel
| 920069524 |
| Spacer Rear Bearing |
| 2 |
| 1210100221 |
| Plug, Breather |
| 2 |
| 1600020099 |
| Oil Level Gauge |
| 1 |
NSN 4320-01-121-9680
270’ A/C Chill Water Pump Unit
Worthington Pump, P/N D-1131 3x1 1/2x6
Unit Total
Price Price
Estimated Qty: 1 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 806169-00 |
| Impeller Screw |
| 1 |
| P02736 |
| Impeller Screw Gasket |
| 1 |
| 390033-01 |
| Impeller Screw Lock Washer |
| 1 |
| 390036-10 |
| Impeller Lock Washer Gasket |
| 1 |
| 389013-10 |
| Sleeve Gasket(outer) |
| 1 |
| 20A11CM022 |
| Shaft Sleeve O-Ring |
| 1 |
| 390007-10 |
| Casing Gasket |
| 1 |
| 960455-10 |
| Stuffing Box Cover Gasket |
| 1 |
| NA |
| Mech. Seal Gland Gasket |
| 1 |
| 15211N18 |
| Mechanical Seal Rotor |
| 1 |
| NA |
| Mechanical Seal Seat |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
Stainless Steel
Stainless Steel
Stainless Steel
| 959943-01 |
| Cover, Stuffing Box |
| 1 |
| EDG1484-ieee45 |
| Motor, AC |
| 1 |
NSN 4320-01-122-3852
270’ Auxiliary Sea Water Pump Unit
Dresser Pump, P/N D1161-6x4x6, Y-671191
Unit Total
Price Price
Estimated Qty: 8 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 973974-00) |
| Shaft Sleeve |
| 1 |
| 809663-00 |
| Bearing, Thrust |
| 1 |
| 19A19N09 |
| Bearing Locknut |
| 1 |
| 390084-00 |
| Impeller Nut Lock Washer |
| 1 |
| 959481-01 |
| Ring, Adapter & Cover |
| 1 |
| 390095-00 |
| Impeller Nut Gasket |
| 1 |
| 390100-10 |
| Impeller Lock Washer Gasket |
| 1 |
| 351959-11 |
| Outer Sleeve Gasket |
| 1 |
| 399033-11 |
| Inner Sleeve Gasket |
| 1 |
| 813013-28 |
| Lip seal, line bearing |
| 1 |
| 813013-29 |
| Lip seal, thrust bearing |
| 1 |
| 15116N18 |
| Mechanical Seal, Less Gland |
| 1 |
| 390007-10 |
| Casing Gasket |
| 1 |
| 390090-10 |
| Mechanical Seal Gland Gasket |
| 1 |
| 390066-00 |
| Line Bearing Cover Gasket |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 973249-00 |
| Cover, Stuffing Box |
| 1 |
| 970824-04 |
| Mechanical Seal Gland |
| 1 |
| 039115-00 |
| Key, Impeller |
| 1 |
| 959576-00 |
| Cover, Line Bearing |
| 1 |
| 959574-00 |
| Cover, Thrust Bearing |
| 1 |
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
| Pipe Plug, Thread to O-Ring |
| 1 |
| 806171-00 |
| Connector, Tubing |
| 1 |
| 959476-00 |
| Housing, Bearing |
| 1 |
| P04262-00 |
| Coupling Half |
| 2 |
| 019738-00 |
| Key, Coupling |
| 1 |
| 60730884 |
| Bearing Locknut Washer |
| 1 |
NSN 4320-01-183-9557
270’ JP-5 Transfer Pump
Dresser Pump, P/N SZC-1BM3C1A
Unit Total
Price Price
Estimated Qty: 2 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 1500290299 |
| Roller Bearing |
| 2 |
| 1500290199 |
| Inner Race Bearing |
| 2 |
| 1500030099 |
| Ball Bearing |
| 2 |
| 2100590131 |
| Mechanical Seal |
| 4 |
| 2710030421 |
| Timing Gear Locknut |
| 2 |
| 0702380090 |
| Oil Seal, Bracket |
| 4 |
| 0702420090 |
| Oil Seal, Front |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 0130141851 |
| Bracket-Rear |
| 1 |
| 0130141751 |
| Bracket-Front |
| 1 |
| 0910150545 |
| Spacer-Rotor |
| 4 |
| 2101630245 |
| Stationary Seat |
| 4 |
| 2902070021 |
| Retaining Pin |
| 4 |
| 0920071124 |
| Spacer-Timing Gear |
| 2 |
| 092006622 |
| Spacer-Rear Bearing |
| 2 |
| 2715010421 |
| Timing Gear Lock Washer |
| 2 |
| 0620010321 |
| Coupling Key |
| 1 |
| 0620015821 |
| Timing Gear Key |
| 2 |
| 1304050021 |
| Screw, Head Front |
| 6 |
| 1304050121 |
| Screw, Head Front |
| 2 |
| 1304050821 |
| Screw, Rear Front |
| 8 |
Stainless Steel
| 1600020099 |
| Oil Level Gage |
| 1 |
| 2300210021 |
| Snap Ring, Front |
| 4 |
| 2300470021 |
| Snap Ring, Rear |
| 2 |
NSN 4320-01-481-4914
270’ Fire Pump Unit Crane Company, P/N 3186-9534-USCG Unit Total
Price Price
Estimated Qty: 3 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
442-17 SA 678326
(OEM Only)
| 0068364 |
| Impeller Nut Gasket |
| 1 |
| 0068368 |
| Impeller Sleeve Gasket |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| C0116457P |
| Casing Assembly, Pump |
| 1 |
| 0068354 |
| Washer, Impeller |
| 1 |
| 8076021 |
| Abrasive Separator |
| 1 |
| 8109513 |
| Abrasive Separator Assembly |
| 1 |
NSN 4320-01-131-0841
270’ Sewage Discharge Pump Unit
Fairbanks Morse Pump Corp., P/N B5452K-CCW-8.5IN
Unit Total
Price Price
Estimated Qty: 4 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 2700673-003 |
| Gasket, Volute |
| 1 |
| 2003721 |
| Gasket, 2” Flange Neoprene |
| 2 |
| HYD1AD2 |
| Seal, Mechanical |
| 1 |
| 2700673-012 |
| Gasket, Seal Housing |
| 1 |
| 2700673-021 |
| Slinger, Water |
| 1 |
| 91610381 |
| Bearing, Driven End |
SKF No. 6207-2Z
| 91610810 |
| Bearing, Opposed End |
SKF No. 6204-2Z
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 2502596-003 |
| Coupling, Flexible |
| 2 |
| 2600817 |
| Pressure Cup Assembly |
| 1 |
| 2700673-002 |
| Head, Front |
| 1 |
½-13 x 1-1/4
| 2700673-005 |
| Pipe Plug, ¼ |
| 1 |
| 2700673-009 |
| Capscrew3/8-16 x 1-1/8 |
| 1 |
| 2700673-010 |
| Gland, Seal Housing |
| 8 |
| 2700673-011 |
| Seal Housing |
| 1 |
¼-20x1
| 2700673-014 |
| Machine Screw |
¼-20 x 3/8
½-13 x 1-1/4
| 2700673-018 |
| Jam Nut, ½-13 |
| 4 |
3/8-18 x 7/8
| 270673-020 |
| Key 3/13x3/16x1-3/8 |
| 1 |
| (T2B1ER 8.5IN CCW) |
| Impeller CCW Rotation |
T2B1ER 8.5 IN CCW
2600934-008
(6-341728-01)
NSN 4320-01-339-6786
270’ In-Port, Auxiliary Salt Water Cooling Pump Unit
Paco Pumps, P/N 2570-7
Unit Total
Price Price
Estimated Qty: 3 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 06016762P4 |
| Adapter, Shaft |
| 1 |
| 21009216J |
| Motor Bracket |
| 1 |
NSN 4320-01-521-7356
270’ Reverse Osmosis HP Pump
Aqua Pro Pumps, P/N 70-3000
Unit Total
Price Price
Estimated Qty: 2 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 70-0439 |
| Bearing, Tapered Roller |
| 2 |
| 70-0701 |
| Seal, Oil, Crankshaft |
| 1 |
| 70-3023 |
| Slinger, Plunger |
| 5 |
| 70-3017 |
| Washer, Plunger Retainer, 3P20/5P50 TI |
| 2 |
| 70-3007 |
| Assembly, Weep Ring |
| 5 |
| 70-3010 |
| Spacer, PL Seal |
| 5 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 70-3082 |
| Crankcase, Titan Series 5P50 |
| 1 |
| 70-3057 |
| Insert, .25-20UNC-2Ax.38 |
| 12 |
| 70-3056 |
| Insert, .313-18UNC-2A, .47 |
| 8 |
| 70-3054 |
| Insert, .625-11UNC-2A, 1.25 |
| 6 |
| 70-3055 |
| Insert, .625-11UNC-2A, 1.875 |
| 2 |
| 70-3044 |
| Cap, Oil Filler |
| 1 |
| 70-3046 |
| Plug, MS18829-10, .25 NPT, 316 CRES |
| 1 |
| 70-3006 |
| Stud, 5/8-11UNC-2A x 5.50, SQ Shank, BLK-OXIDE STL |
| 2 |
| 70-0344 |
| Assembly, Plunger Rod |
| 5 |
| 70-3024 |
| Pin, Dowel, M14, 39, STL |
| 5 |
| 70-3098 |
| Assembly, Connecting Rod |
| 5 |
| 70-3034 |
| Crankshaft, Titan Series 5P50, STL |
| 1 |
| 70-3079 |
| Cap, Guide Bearing, 5P50, AL |
| 1 |
| 70-3081 |
| Cap, Pulley Bearing, 5P50, AL |
| 1 |
| 86-0256 |
| Screw, 313-18UNC-2Ax3/4 SHC, 316 CRES |
| 8 |
| 86-0266 |
| Bolt, .38-20UN-2Ax1.5, STAR HD, 4040-STL |
| 10 |
| 70-3087 |
| Cover, Crankcase, 5P50,AL |
| 1 |
| 70-6044 |
| Sight Glass, Oil, PLY, CRBN |
| 1 |
| 70-6043 |
| Ring, Retainer, Sight Glass |
| 1 |
| 86-0151 |
| Screw, .25-20UNC-2A, .75, SKT HD 316 CRES |
| 12 |
| 70-3022 |
| Washer, Key Hole, 3P20/5P50, 316 CRES |
| 5 |
| 70-3021 |
| Plunger, 3P20/5P50, Ceramic |
| 5 |
| 70-3020 |
| Stud, M7x1.0x3.40, Plunger, 316 CRES |
| 5 |
| 70-3016 |
| Nut, M7x1.0, Plunger Assy, 3P20/5P50 TI |
| 5 |
| 70-3012 |
| Retainer, Seal, 3P20/5P50, NYL 6/12 |
| 5 |
| 70-3005 |
| Manifold, Titan Series 5P50, TI |
| 1 |
| 70-3001 |
| Plug, Valve, MS18229-16, TI |
| 10 |
| 70-3064 |
| ADTR, MS18229-24, 2.0 Hose Barb, TI |
| 1 |
| 70-3059 |
| ADTR, 1.063-12UN-2A, Face Seal, MS18229-16, TI |
| 1 |
| 70-3065 |
| Plug, MS18829-24, TI |
| 1 |
| 70-3066 |
| Plug, MS18229-16, TI |
| 1 |
| 70-3050 |
| Pin, Dowel, .38, 1.00, 316 CRES |
| 2 |
NSN 4320-01-535-4782
270’ Potable Water Service Pump Unit
Gould Pumps Inc, P/N LF 3196
Unit Total
Price Price
Estimated Qty: 3 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 496 |
| O-Ring, Bearing Housing |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 100G |
| Casing, W/Drn & Ga Conn |
| 1 |
| 382 |
| Lockwasher, Bearing |
| 1 |
| 408A |
| Plug, Pipe, Oil Drain |
| 1 |
| 408L |
| Plug, Pipe, Cooling Inlet |
| 1 |
| 408M |
| Plug, Pipe, Cooling Outlet |
| 1 |
| BVD184TTFS400 |
| Motor, AC, 5 HP |
| 1 |
NSN 4320-01-112-0008
270’/378’/EAGLE Sewage Pump Unit
Colt Industries, P/N B5452K CCW/9.75IN
Unit Total
Price Price
Estimated Qty: 4 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
2700673-007
(HYD1AD2-9906F)
| 2700673-016 |
| Packing Preformed |
| 1 |
| 6204-2Z |
| Bearing, Ball, Annular |
| 1 |
| 6207-2Z |
| Bearing, Ball Annular |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| T2B1ER-9.75 IN-CCW |
| Impeller, Pump, Centrifugal |
| 1 |
| 6-341729-01 |
| Motor, AC, 2 HP |
| 1 |
| 2700673-006 |
| Sleeve, Shaft, Pump |
| 1 |
NSN 4320-01-131-6912
270’ Waste Water Discharge Pump Unit
Colt Industries, P/N B5452K5HPODP, 8.0
Unit Total
Price Price
Estimated Qty: 2 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 2700673-006 |
| Sleeve, Shaft |
| 1 |
| 2700673-007 |
| Seal Assembly |
| 1 |
6204-2Z
(91610381)
6207-2Z
(91610381)
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 2700673-002 |
| Head, Front |
| 1 |
| 2700673-004 |
| Capscrew, ½-13x1-1/4 |
| 8 |
| 2700673-005 |
| Pipe Plug ¼ |
| 1 |
| 2700673-009 |
| Capscrew 3/8-16x1-1/8 |
| 1 |
| 2700673-010 |
| Gland, Seal Housing |
| 1 |
| 2700673-011 |
| Seal Housing |
| 1 |
| 2700673-013 |
| Capscrew ¼-20x1 |
| 4 |
| 2700673-014 |
| Machine Screw ¼-20x3/8 |
| 1 |
| 2700673-015 |
| Adaptor, Pump to Motor |
| 1 |
| 2700673-017 |
| Capscrew ½-13x1-1/4 |
| 8 |
| 2700673-018 |
| Jam Nut ½-13 |
| 4 |
| 2700673-019 |
| Capscrew 3/8-18x7/8 |
| 4 |
| 2700673-020 |
| Key 3/16x3/16x1-3/8 |
| 1 |
| 2700673-021 |
| Water Slinger |
| 1 |
| 2700673-031 |
| Impeller, 8.0 CCW |
| 1 |
NSN 4320-01-554-3286
270’ Chilled Water Circ Pump
Flowserve, P/N 1K3x1.5v-81RV
Unit Total
Price Price
Estimated Qty: 5 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| AY51803A-TFR |
| Gasket, Impeller |
| 1 |
| Y22774EA-TM |
| Gasket, Cover |
| 1 |
| BY50424G-TSSR |
| Oil Seal, IB |
| 1 |
| AY58748A-SR |
| Bearing, IB |
| 1 |
| AY58749A-SR |
| Bearing, OB |
| 1 |
| BY50424G-TSSR |
| Oil Seal, OB |
| 1 |
| 74915927 |
| Seal, Mechanical |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| DY57443B-C1 |
| Adapter, Motor |
| 1 |
| AY54674C-B8C1 |
| Stud, Gland |
| 4 |
| AY54058G-E8 |
| Hex Nut, Gland |
| 4 |
| AY50716A-TFEC |
| Deflector |
| 1 |
| AY38338J-B7TF |
| Stud-Casing |
| 8 |
| CY55945B-DC12 |
| Housing, Bearing |
| 1 |
| 95200879 |
| Locknut, Bearing |
| 1 |
| 95200978 |
| Lockwasher, Bearing |
| 1 |
| 95264008 |
| Key, Shaft/CPLG |
| 1 |
| 95043766 |
| Fastener-Cover Adapter |
| 2 |
| CY55934B-C1 |
| Carrier, Bearing |
| 1 |
| AY38338J-B7 |
| Stud, Adapter, Casing |
| 4 |
| 95077798 |
| Nut, Adapter/Casing |
| 4 |
| 68886589 |
| Jam Nut, Adjuster |
| 4 |
| VCP3771T-6 |
| Motor, AC, 10HP |
| 1 |
| Unknown |
| Bearing, Motor AC |
| 1 |
| Unknown |
| Bearing, Motor AC |
| 1 |
NSN 4320-01-318-0826
270’ Bilge/Ballast and I/P Auxiliary Salt Water Pump Unit
MP Pumps Inc., P/N FLOMAX 15
Unit Total
Price Price
Estimated Qty: 2 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 22358 |
| Gasket- Outlet Flange |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 21186 |
| Drain Plug, SS ¼” NPT |
| 1 |
| 21230 |
| Hex Nut, Bronze, 3/8” |
| 14 |
| 26051 |
| Lockwasher, Bronze, 3/8” |
| 14 |
| 22467 |
| Flange, 3” Inlet, Bronze |
| 1 |
| 22470 |
| Flange, 3” Outlet, Bronze |
| 1 |
| 22375 |
| Wear Plate Assembly, Bronze |
| 1 |
| 22243 |
| Wear Plate, Bronze |
| 1 |
| 22360 |
| Flat Head Screw, SS 3/8” |
| 2 |
| 26053 |
| Acorn Nut, Bronze |
| 2 |
| 23385 |
| Impeller Assembly |
| 1 |
| 23039 |
| Impeller Clamp Assembly |
| 1 |
NSN 4320-01-519-3163
210’ Sewage Ejector Pump Unit
Envirovac, P/N 5700242
Unit Total
Price Price
Estimated Qty: 1 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 5700031-017 |
| Mechanical Seal |
| 1 |
| 5700031-272 |
| Ball Bearing, Ventilation Side |
| 1 |
| 5700031-282 |
| Ball Bearing, Drive Side |
| 1 |
| 5700031-482 |
| Labyrinth Disc |
| 1 |
| 5700031-067 |
| Mechanical Seal |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 5700031-013 |
| Impeller Nut |
| 1 |
| 5700031-019 |
| Cover, w/ Wearing Plate |
| 1 |
| 5700031-020 |
| Impeller Cap |
| 1 |
| 5700031-442 |
| Shaft, w/ Rotor |
| 1 |
| 5700031-452 |
| Flange Bearing Bracket |
| 1 |
| 5700031-462 |
| Bearing Bracket |
| 1 |
| 5700031-472 |
| Casing w/ Stator and Winding |
| 1 |
| 5700031-050 |
| Sealing Plate |
| 1 |
| 5700031-054 |
| Sealing Plate |
| 1 |
| 5700031-058 |
| Spacer Disc |
| 1 |
| 5700031-059 |
| Safety Ring |
| 1 |
| 5700031-061 |
| Spacer Disc |
| 1 |
| 5700031-062 |
| Safety Ring |
| 1 |
| 5700031-069 |
| Plug, Filling |
| 1 |
| 5700031-071 |
| De-Aerating Plug |
| 1 |
| 5700031-072 |
| Oil Drain Plug |
| 1 |
| 5700031-742 |
| Motor Assembly |
| 1 |
NSN 4320-01-230-6221
210’ Fuel Oil Transfer Pump
Haight Pump, P/N 12APR
Unit Total
Price Price
Estimated Qty: 2 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| AP1218A |
| Mechanical Seal |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| AP1290HC-1 |
| Gland Stud & Nuts |
| 3 |
| AP1222MC |
| Mechanical Seal Gland |
| 1 |
| AP1290HC-1 |
| Studs & Nuts |
| 20 |
| AP1255C |
| Adjustment Screw |
| 1 |
| AP1290HC-2 |
| Flange Studs/Nuts |
| 8 |
| AP1223S |
| Following Shaft |
| 1 |
NSN 4320-01-225-7493
210’ Fire Pump
Aurora Pump, P/N 723-0164-000-PUMP END ONLY
Unit Total
Price Price
Estimated Qty: 2 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 712-0228-653 |
| Seal, Grease |
| 1 |
| 712-6321-653 |
| Seal, Grease |
| 1 |
| 712-6322-653 |
| Seal, Grease |
| 1 |
| 756-0401-235 |
| Sleeve, With O-Ring |
| 1 |
| 712-0476-737 |
| Seal Assembly |
| 2 |
| 756-0641-644 |
| Sleeve, With O-Ring |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 508-0001-651 |
| Grease Fitting |
| 2 |
| 164-0549-010 |
| Cartridge Cap |
| 1 |
| 676-0440-088 |
| Retainer Ring |
| 1 |
| 164-0549-010 |
| Cartridge Cap |
| 1 |
| 59F05H210773111 |
| Impeller |
| 1 |
| 179-1576-208 |
| Casing Assembly |
| 1 |
| 708-0013-365 |
| Drive Screw |
| 2 |
NSN 4320-01-203-5819
210’ FRESH Water Transfer Pump Unit
Goulds Pump, P/N 3655S-1 1/4x1 1/2x8 Unit Total
Price Price
Estimated Qty: 1 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________ Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 70782-83-5131 |
| Gasket, Shaft Sleeve |
| 1 |
| 68551-5132 |
| Gasket, Case |
| 1 |
| SP-D-1639/BP2C1 |
| Mechanical Seal |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 68686-2226 |
| Shaft Sleeve |
| 1 |
| 49568-52-2226 |
| Key, Impeller |
| 1 |
| 97-190-1127 |
| Suction Cover |
| 1 |
| 68679-1-2226 |
| Washer, Impeller |
| 1 |
| 54394-1-2228 |
| Nut, Impeller |
| 1 |
NSN 4320-01-206-2611
210’ Bilge Pump Unit
Reddy-Buffaloes Pump, P/N GROUPIII-1-1/4x1-1/4
Unit Total
Price Price
Estimated Qty: 1 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| BG6203B03 |
| Bearing, Ball |
| 1 |
| BG6206B03 |
| Bearing, Ball |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
NSN 4320-01-422-0469
210’ Reverse Osmosis LP Pump
Ampco Pumps, P/N KC2 1-1/4x-1
Unit Total
Price Price
Estimated Qty: 1 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| GX5100400 |
| O-Ring, K2 Impeller |
| 1 |
| GX5042200 |
| Slinger, 80 DUR |
| 1 |
| GX5039902 |
| Gasket, Lexide |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| BV8401201 |
| Casing, KC2 1-1/4x1 |
| 1 |
| BI8202990 |
| Impeller, KC2 1-1/4x 1BZ |
| 1 |
| GX8301591 |
| Mounting Bracket, KC2 |
| 1 |
| GX5077100 |
| Capscrew, SS 3/8-16x1 HHCS |
| 8 |
| JM3555 |
| Motor, 2HP, 3450 RPM |
| 1 |
NSN 4320-01-273-9350
210’ Sewage Discharge Pump Unit
Envirovac, P/N 5600000-002 Unit Total
Price Price
Estimated Qty: 4 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 5700033-272 |
| Ball Bearing |
| 1 |
| 5700033-282 |
| Ball Bearing |
| 1 |
| 5700033-067 |
| Mechanical Seal |
| 1 |
| 5700033-075 |
| Seal, Impeller Nut |
| 1 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 5700033-012 |
| Volute Drain Plug |
| 1 |
| 5700033-013 |
| Impeller Nut |
| 1 |
| 5700033-442 |
| Shaft with Rotor |
| 1 |
| 5700033-452 |
| Flange Bearing Bracket |
| 1 |
| 5700033-462 |
| Bearing Bracket |
| 1 |
| 5700033-472 |
| Casing with Stator and Winding |
| 1 |
| 5700033-482 |
| Labrinth Disc |
| 1 |
| 5700033-050 |
| Sealing Plate |
| 1 |
| 5700033-532 |
| Shaft Spring |
| 1 |
| 5700033-058 |
| Spacer Disc |
| 1 |
| 5700033-059 |
| Safety Ring |
| 1 |
| 5700033-062 |
| Safety Ring |
| 1 |
| 5700033-069 |
| Filling Plug |
| 1 |
| 5700033-071 |
| De-Aerating Plug |
| 1 |
| 5700033-072 |
| Oil Drain Plug |
| 1 |
| 5700033-762 |
| Motor Assembly |
| 1 |
NSN 4320-01-503-5378
210’ Reverse Osmosis HP Pump
Village Marine, P/N 70-6178
Unit Total
Price Price
Estimated Qty: 4 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open, inspect and report of BER only, no repairs and no scrap credit)
1 each $______________
Scrap Credit offered to the Government for disposal at Contractor’s
Facility (See Paragraph 3.5 of Specification R-503-0519)
1 each $______________
Mandatory Replacement Parts:
| Part Number |
| Description |
| Qty |
| 70-6029 |
| O-Ring, Oil Cap |
| 1 |
| 70-6012 |
| O-Ring, Retainer Bolt |
| 10 |
| 30-0596 |
| O-Ring HP Fitting |
| 2 |
| 70-6002 |
| O-Ring, Valve Plug |
| 10 |
| 70-0410 |
| Ring, Weep (Big) |
| 5 |
| 70-0409 |
| Ring, Weep (Small) |
| 5 |
| 70-6082 |
| O-Ring, Sightglass |
| 1 |
| 70-6039 |
| O-Ring, Bearing Cap |
| 2 |
| 70-6060 |
| Bearing, Sightglass Side |
| 1 |
| 70-6058 |
| O-Ring, Crankcase Cover |
| 1 |
| 30-1286 |
| O-Ring, Oil Drain Plug |
| 1 |
| 70-0311 |
| Bearing, Pulley Side |
| 1 |
| 70-6061 |
| Oil Seal, Crankshaft |
| 1 |
| 70-6015 |
| Slinger, Plunger |
| 5 |
| Part Number |
| Description |
| Qty |
| UNIT |
PRICE
TOTAL PRICE
| 70-6056 |
| Crankcase, 708-5 |
| 1 |
| 70-6030- |
| Cap, Oil Filler |
| 1 |
| 70-6013 |
| Plunger, Ceramic |
| 5 |
| 70-6035 |
| Washer, Plunger, Retainer |
| 5 |
| 70-6011 |
| Bolt, Plunger Retainer |
| 5 |
| 70-6053 |
| Manifold, 708-5 |
| 1 |
| 30-1082 |
| Adapter, HP Hose |
| 1 |
| 70-6010 |
| Snap Ring, Retaining |
| 5 |
| 70-6017 |
| Washer, Oil Seal (Large) |
| 5 |
| 70-6019 |
| Washer, Oil Seal (Small) |
| 5 |
| 86-0151 |
| SHCS, ¼”-20 x 3/4” |
| 12 |
| 70-6043 |
| Ring, Sight Glass Retainer |
| 1 |
| 70-6044 |
| Sightglass, Oil |
| 1 |
| 70-6042 |
| Cap, Bearing (Sightglass Side) |
| 1 |
| 70-1281 |
| Snap Ring, Bearing Retainer |
| 1 |
| 30-1106 |
| Plug, 1/8” MNPT |
| 5 |
| 70-6070 |
| Roll Pin, Plunger Assy |
| 5 |
| 70-0382 |
| Wrist Pin, Plunger Connector |
| 5 |
| 70-6067 |
| Connector, Plunger |
| 5 |
| 70-6063 |
| Cap, Connecting Rod |
| 5 |
| 70-0694 |
| SHCS, ¼”-20 x 7/8” |
| 10 |
| 70-6057 |
| Cover, Crankcase (708-5) |
| 1 |
| 70-0696 |
| Plug, Oil Drain |
| 1 |
| 70-6041 |
| Cap, Bearing (Open Side) |
| 1 |
NSN 4320-01-199-9751
210’ Fresh Water Service Pump Unit Goulds Pump, P/N 3655S-111/4x11/2x7
Unit Total
Price Price
Estimated Qty: 4 each $ _______________ $________________
BEYOND ECONOMICAL REPAIR (BER):
In accordance with Paragraph 3.5 of Specification R-503-0519, the contractor shall provide pricing for disposal of this CLIN if asset determined BER.
Reassembled and returned to Coast Guard (This cost shall be for open,…
This is the start of the file's text. The full file is on GovTribe.
