SOW 26-6G3 Siemens EDA SW.pdf

91 KB Posted

Attached to
Siemens EDA Software
Solicitation number
HQ072726QZL04
Issued by

About this file

Written by GovTribe AI ·

This is a Statement of Work (SOW) for DMEA contract 26-6G3, dated 29 June 2026, addressing the acquisition of Siemens Electronic Design Automation (EDA) software tools for integrated circuit design collaboration between the US Navy and US Army.

The SOW requires the vendor to provide three software licenses on a Site Float basis for the Linux platform: Siemens S-Edit Design Application (Product Number 275196), Siemens L-Edit Design Application (Product Number 275199), and Siemens Tanner Calibre One DRC/LVS Operation software (Product Number 266245), with one license each. The software is applicable to schematic capture, simulation, layout, design rule checking, and layout versus schematic verification activities. Beyond the licenses themselves, the vendor must provide software updates, maintenance, and technical support for all products during the contract period, as well as access to Commercial Off-The-Shelf (COTS) user and operating manuals. Points of contact are identified at DMEA/MEAC in McClellan, California, including an Electronics Engineer and Branch Chief, though specific voice and email information is not populated in the document.

View the file

Other files

File Type Posted
SOW 26-6G3 Combined Synopsis and Solicitation_08Sep26.pdf PDF
Brand Name JA SOW 26-6G3.pdf PDF
SOW 26-6G3 Combined Synopsis and Solicitation.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SOW PWS Template 2021 June.doc

STATEMENT OF WORK (SOW)

DMEA 26-6G3

29 June 2026

1.0 SCOPE:

1.1 TITLE: Siemens EDA Software

1.2 APPLICABILITY: This requirement is applicable to integrated circuit design: schematic capture, simulation, layout, design rule checking and layout versus schematic verification.

1.3 BACKGROUND: The US Navy and US Army are requesting for DMEA to collaborate with them in design and layout of two integrated circuits using specific software tools.

1.4 PURPOSE: The purpose of this SOW is to acquire the specific EDA software tools in order to properly collaborate with the US Army and US Navy.

2.0 REQUIREMENTS:

2.1 GENERAL REQUIREMENTS:

2.1.1 RESERVED

2.1.2 REQUIREMENT: Software Licenses: the vendor shall provide the software licenses specified below.

Product Number Description Quantity

275196 Siemens S-Edit Design Ap SW Subscription, License Type: Site Float, Platform:

LINUX

275199 Siemens L-Edit Design Ap SW Subscription, License Type: Site Float, Platform:

LINUX

266245 Siemens Tanner Calibre One DRC/LVS Op SW Subscription, License Type: Site Float, Platform: LINUX

2.1.3 Software Support: The vendor shall provide software updates, maintenance, and support for all products identified in paragraph 3.3.1. during the covered period

2.1.4 DOCUMENTATION: The contractor shall provide access to Commercial Off-The-Shelf (COTS) user/operating manuals for the software described in Paragraph 3.3.1.

3.0 POINTS OF CONTACT:

DMEA/ MEAC Electronics Engineer:

Address: 4234 54th Street McClellan, CA 95652-2100 Voice:

E-Mail:

DMEA/ MEAC Branch Chief:

Address: 4234 54th Street McClellan, CA 95652-2100 Voice:

E-Mail:

2.1.1 RESERVED

File details come from the government source that posted it. Updated .