HQ051618R0014_MOD0003.pdf

HQ0516812331

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to provide responses to additional questions after site visit w as conducted.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 14

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 11-May-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X HQ051618R0014

X 9B. DATED (SEE ITEM 11)

18-Apr-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

11-May-2018

CODE

HQ0516 DEFENSE MEDIA ACTIVITY HQ

6700 TAYLOR AVENUE

FORT MEADE MD 20755

HQ0516 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

HQ051618R0014

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by reference:

252.246-7006 252.246-7008

The following have been added by full text:

ADDITIONAL RESPONSES

Response to Additional Questions

1. Are they any restriction on the Antenna manufacturer country of origin?

Answer: Only from designated countries. See FAR 25.1 Buy America-Supplies

“Designated country” means any of the following countries:

(1) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen and Matsu (Chinese Taipei)”), Ukraine, or United Kingdom);

(2) A Free Trade Agreement (FTA) country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Oman, Panama, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).

2. Can we use a substitute for the ACU 7134?

Answer: Yes, as long as it is equivalent to it and the specifications are the same.

3. Since ASC has informed us that they cannot modify the existing 3.7 meter antenna and a new one is quite expensive, would it be possible to bid a 3.7 meter prime focus with same performance in its place?

Answer: Yes as long as the antenna performs the same operation

4. Would it be possible to bid a non US manufacturer if we supply all US Made antenna electronics?

Answer: The Buy American statute restricts the purchase of supplies that are not domestic end products.

For manufactured end products, the Buy American statute uses a two-part test to define a domestic end product. The article must be manufactured in the United States; and the cost of domestic components must exceed 50 percent of the cost of all the components.

5. Are there any countries we cannot use?

Answer: Please see Question 1. These are the only countries that are designated to make purchases from.

6. Is it possible to substitute the 1230 deice controller and the 7134 antenna controller with a different manufacturer?

Answer: Yes, as long as characteristics and specification are equivalent to it

7. Can a layout or drawing of the site be provided showing distances between antennas and equipment locations?

Answer: Provided a picture and diagram of the Antenna layout already can go to google maps (39.091312, -76.744039) measure distance if needed. The longest cable run to the shelter is approx. 250 feet.

8. Does Government now intend to add a new CLIN for a UPC and beacon receiver or should it be included as an optional item?

Answer: If the vendor is providing a quote of these items they should be included in their quote as optional item. If items are incidental to the installation of the equipment then there will not be an additional CLIN.

9. Will Government provide the desired specifications for the UPC?

Answer: Needs to be able to control remotely and our plant is 75 Ohm

10. Would Government please clarify if the SSPAs are required to be 200W Plinear or Psat there is a very large cost difference in these two solutions.

Answer: Would prefer Plinear but either solution is acceptable

11. Is there a 10Mhz reference standard available for the SSPAs or should they be internally clocked?

Answer:They would need to be internally clocked until the signal generator is installed at the shelter.

12. Is a dehydrator system required for the 7.3m system? If so will a CLIN be added for it?

Answer: Put as a non-listed, but recommended items as “optional” in the quotation quote

13. Please describe connectivity requirements (or system demarcation point) concerning the IFL cabling terminating in the racks and indoor equipment (encoders, IRD’s, spectrum analyzers, etc.). Is the contractor to provide dividers, patch panels, switchers or otherwise? A simple system block diagram would be helpful.

Answer: The contractor will be responsible to terminate all cable to the equipment they install in the main shelters racks, patch panels are already installed in the building and will use the open ports to run cables to.

14. Please describe the approval process required for the civil works (drawings, soil testing, cure tests, etc.).

Answer: None needed as the Satellite farm has been approved for multiple antennas which these fall into

15. Is a milestone payment plan to be negotiated with the successful awardee? Should a preference be submitted as part of the quotation?

Answer: Payments will be made once items are received and accepted by the government. Installation will be paid based on percentage of completion (will be negotiated with awardee)

16. Delivery for some of the equipment is still projected at beyond the stated 60 day delivery timeframe. Can an exception be noted in the quotation (naming specific items and OEM delivery dates) as long as the overall schedule is not impacted?

Answer: Yes. If known what the delivery schedule for the equipment will be, please note in quote.

17. Should non-listed, but recommended items be noted as “optional” in the quotation?

This may include items such as a dehydrator and patch or divider panels.

Answer: Yes

18. What system documentation is required for project completion? IE: System drawings, Cable run list, Block and Level, Antenna pattern tests, etc

Answer: System drawings, Cable run list, Block and Level, Antenna pattern tests, documentation needed for project completion.

19. Please confirm no permits are required for the construction of the foundation; and if any are, they will be furnished by the Gov’t

Answer: The Antenna site has been approved for a specific number of antennas which this fall into

20. Will a lift plan be required for the antenna installation?

Answer: No lift plan required

21. Will site access be available 6am to 7pm? 7 days a week?

Answer: Site will be accessible Monday thru Saturday from 6am til 6pm

22. Will crew be escorted to/from site or will we be given gate pass?

Answer: Crew will be given temporary base passes for the duration of the project

23. What is the standard voltage of the existing racks? Is it single or three phase?

Answer: The racks are single phase

24. Is there an existing M&C S/W package being used and if so, what product?

Answer: There is no existing system in place

25. Please define the term “NMR V 030/040/030” as used in the requirements for the Pol Motor support for CLIN 0001 and 0002.

Answer: NMR V is the brand for the worm gear reducers for the motor. This or something equivalent will be acceptable

26. Please define the term “CGC” as used for the 1:2 system and dual run for CLIN 0002.

Answer: CGC stands for Complimentary Ground Component

52.246-18 WARRANTY OF SUPPLIES OF A COMPLEX NATURE (MAY 2001) - ALTERNATE IV (APR 1984)

(a) Definitions. As used in this clause--

Acceptance, means the act of an authorized representative of the Government by which the Government assumes for itself, or as an agent of another, ownership of existing and identified supplies, or approves specific services rendered, as partial or complete performance of the contract.

Supplies, means the end items furnished by the Contractor and related services required under this contract. The word does not include "data."

(b) Contractor's obligations. (1) The Contractor warrants that for one (1) year after acceptance all supplies furnished under this contract will be free from defects in material and workmanship and will conform with all requirements of this contract; provided, however, that with respect to Government-furnished property, the Contractor's warranty shall extend only to its proper installation, unless the Contractor performs some modification or other work on the property, in which case the Contractor's warranty shall extend to the modification or other work.

(2) Any supplies or parts thereof corrected or furnished in replacement shall be subject to the conditions of this clause to the same extent as supplies initially delivered. This warranty shall be equal in duration to that set forth in paragraph (b)(1) of this clause and shall run from the date of delivery of the corrected or replaced supplies.

(3) The Contractor shall not be obligated to correct or replace supplies if the facilities, tooling, drawings, or other equipment or supplies necessary to accomplish the correction or replacement have been made unavailable to the Contractor by action of the Government. In the event that correction or replacement has been directed, the Contractor shall promptly notify the Contracting Officer, in writing, of the nonavailability.

(4) The Contractor shall also prepare and furnish to the Government data and reports applicable to any correction required (including revision and updating of all affected data called for under this contract) at no increase in the contract price.

(5) When supplies are returned to the Contractor, the Contractor shall bear the transportation costs from the place of delivery specified in the contract (irrespective of the f.o.b. point or the point of acceptance) to the Contractor's plant and return.

(6) All implied warranties of merchantability and "fitness for a particular purpose" are excluded from any obligation contained in this contract.

(c) Remedies available to the Government. (1) In the event of a breach of the Contractor's warranty in paragraph (b)(1) of this clause, the Government may, at no increase in contract price--

(i) Require the Contractor, at the place of delivery specified in the contract (irrespective of the f.o.b. point or the point of acceptance) or at the Contractor's plant, to repair or replace, at the Contractor's election, defective or nonconforming supplies; or

(ii) Require the Contractor to furnish at the Contractor's plant the materials or parts and installation instructions required to successfully accomplish the correction.

(2) If the Contracting Officer does not require correction or replacement of defective or nonconforming supplies or the Contractor is not obligated to correct or replace under paragraph (b)(3) of this clause, the Government shall be entitled to an equitable reduction in the contract price.

(3) The Contracting Officer shall notify the Contractor in writing of any breach of the warranty in paragraph (b) of this clause within 45 days after the notice of the defect The Contractor shall submit to the Contracting Officer a written recommendation within 7 days as to the corrective action required to remedy the breach. After the notice of breach, but not later than 14 days after receipt of the Contractor's recommendation for corrective action, the Contracting Officer may, in writing, direct correction or replacement as in paragraph (c)(1) of this clause, and the Contractor shall, notwithstanding any disagreement regarding the existence of a breach of warranty, comply with this direction. If it is later determined that the Contractor did not breach the warranty in paragraph (b)(1) of this clause, the contract price will be equitably adjusted.

(4) If supplies are corrected or replaced, the period for notification of a breach of the Contractor's warranty in paragraph (c)(3) of this clause shall be 30 days from the furnishing or return by the Contractor to the Government of the corrected or replaced supplies or parts thereof, or, if correction or replacement is effected by the Contractor at a Government or other activity, for 45 days thereafter.

(5) The rights and remedies of the Government provided in this clause are in addition to and do not limit any rights afforded to the Government by any other clause of the contract.

(6) The Contractor shall be liable for the reasonable costs of disassembly and/or reassembly of larger items when it is necessary to remove the supplies to be inspected and/or returned for correction or replacement.

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

See Salient Characteristics

To:

See Salient Characteristics. NEW PARTS ONLY, NO GRAY MARKET ITEMS

CLIN 0002

See Salient characteristics

See Salient characteristics, NEW PARTS ONLY, NO GRAY MARKET ITEMS

CLIN 0004

Upgrade existing 3.7m Ku TX antenna system

Upgrade existing 3.7m Ku TX antenna system NEW PARTS ONLY, NO GRAY MARKET ITEMS

The following have been modified:

SALIENT CHARACTERISTICS

CLIN 0001: Two (2ea) 4.8m Antenna Systems: The contractor shall provide two (2ea) fully functional motorized 4.8m RX C/Ku-band Antenna System consisting of the following minimum characteristics, NEW PARTS ONLY, NO GRAY MARKET ITEMS:

• Antenna Reflector system: 4.8 KP - 4.8 meter Compact Cassegrain Antenna Consisting of:

C/Ku-band 4 port, Linear Polarized Feed, RX only, 2 RX (3.4 - 4.2 GHz), 2 RX (10.70 -

12.75 GHz), Kingpost Pedestal – Galvanized, Jackscrews in Azimuth (120°) and Elevation (0°-90°), Reflector - white diffusive painted Aluminum panels * Lightning arresting rods, RX Waveguide Integration Kit for 1:2 Redundant LNA/LNB System and Standard and Extended C/Ku-band Linear Feed, Servo Interface Kit for 4.8m LINEAR for Size 11 Resolvers (Drive Motors for AZ, EL and Pol, Limit Switches, Brackets for Mounting Limit Switches and Encoders, Conduits and Cables), Environmental Hub Kit (with Heater) for 4.8m * Front Rain Shield & Rear Hub Cover - Aluminum (Utility Light, Duplex Outlet(s), Hi/Lo Temp alarm T'stats, Vent Fan and Heater with T'stat control), Lightning Arresting Down Conductors, Feed Rain Blower for 4.8m C-band (Automatic, hub mounted controller, Heated air and moisture probe), 7134 Antenna Control System Consisting Of: 7134 ACU:

PDU 3HP Az/El; NMRV030/040/030 Pol Motor Support: Az Resolver Kit: El Resolver Kit:

Pol Resolver Kit 135FT: ACU to PDU Control Cable 510FT:Az/El/Pol Resolver Cable.

• 1:2 LNB systems: LNB System, 1:2 Redundant, C-Band (3.40-4.20GHz), Includes: Qty.3

ELNB- 3420F, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option with No Options, 300ft. Control Cable

• 1:2 LNB systems: LNB System, 1:2 Redundant, Ku-Band (11.70-12.20GHz), Includes: Qty.3

ELNB-1109HA, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option,

• De-ice System: Deiced Full Reflector, Feed and Sub-reflector for 4.8m Kingpost

*Electric Hot Air * Model 1230 Deice Controller

• L-Band Cabling and Electrical: L-Band cabling (LMR-400) 200' each run and related connectors Conduit runs between indoor equipment and antenna foundation include installation (50' of excavation). Electrical power for De-ice, Motorization, and Utility at the antenna

• (1ea.) 1RU 8-Port IP Spectrum Analyzer, accepts all signals from 5 MHz to 3 GHz and input power levels ranging from –110 to +5 dBm. RBW varies from 1 Hz to 15 MHz (compatible spec as SED Decimator D3), All data communication occurs via built-in Ethernet port.

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi‐CHROMA 4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi‐stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion. Transport Delivery: Unique support for IP Output, Service Filtering & Zixi Link. Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate configurations dependent upon demod. (Specifications to match Adtec RD-71)

• Foundation and Grounding: Foundation, Kit, Halo grounding

CLIN 0002: 7.3m Antenna System: The contractor shall install a fully functional motorized 7.3m TX/RX Ku-band Antenna System consisting of the following minimum characteristics, NEW PARTS ONLY, NO GRAY

MARKET ITEMS:

• 7.3m Antenna Reflector System 7.3 KX - 7.3 meter - Cassegrain Antenna : 7.3 KX - 7.3 meter - Cassegrain

Antenna Ku-band, 4-Port, Linear Polarized Feed 2 Tx (13.75 - 14.50 GHz) 2 Rx (10.70 - 12.75 GHz) Kingpost Pedestal - Galvanized Jackscrews in Azimuth (200° in two segments) and Elevation (0°-90°) Reflector - White Diffusive Painted Aluminum Panels Lightning arresting rods TX Axis Crossover Waveguide for 7.3KX Ku-band 4 Port LINEAR Dual TX Run from Azimuth Axis to Feed Flange 1 KW Power Capability RX Waveguide Integration Kit for 1:2 Redundant LNA/LNB System and Ku-band Linear Feed TRF for 1:2 LNB system, RX CGC for 1:2 system, TX CGC for dual run. "Servo Interface Kit for 7.3KX Ku-band, LINEAR for Size 11 Resolvers (Drive Motors for AZ, EL and Pol, Limit Switches, Brackets for Mounting Limit Switches and Resolvers, Conduits and Cables, Requires GDST Model 7134 Antenna Control System), Environmental Hub Kit (with Heater) for 7.3m Ku or DBS-band Extended Travel (Front Rain Shield and Rear Hub Cover – Aluminum, Utility Light, Duplex Outlet(s), Hi/Lo Temp alarm T'stats, Vent Fan and Heater with T'stat control), Lightning Arresting Down Conductors - for 6.3m/7.3m, Feed Rain Blower for 7.3m Ku-band (Automatic, hub mounted controller, Heated air and moisture probe), Ladder and Platform - 6.3/7.3m (and 4.8m Ka-band), Galvanized 7134 Antenna Control System Consisting Of: 7134 ACU: PDU 3HP Az/El; NMRV030/040/030 Pol Motor Support; Az Resolver Kit: El Resolver Kit: Pol Resolver Kit 135FT : CCW154-S : ACU to PDU Control Cable 510FT : CCW155-S : Az/El/Pol Resolver Cable, LNB System, 1:2 Redundant, Ku-Band (11.70- 12.20GHz), Includes: Qty.3 ELNB-1109HA, Indoor Redundancy Controller, Outdoor Switch Plate Assembly, includes offline I/O option, No Control Cable 300 feet of cable

• De-Ice System: Deiced Full Reflector, Feed and Subreflector for 7.3KX Extended AZ Travel (Similar to

Electric Hot Air Model 1230 Deice Controller)

• L-Band Cabling and Electrical: L-Band cabling (LMR-400) 200' each run and related connectors Conduit runs between indoor equipment and antenna foundation include installation (50' of excavation Electrical power for De-ice, Motorization, and Utility at the antenna

• Ku-Band RF Package: Outdoor 1:2 System consisting of 3 amplifiers, two ganged waveguide switches, high power dummy load, low power dummy load, forward/reverse couplers on waveguide switch outputs, forward coupler on high power dummy load switch port waveguide/co-ax interconnect, mounting unistrut frame.

• (2ea.) Multi-Codec 10-bit Encoder Support for SD/HD, AVC (H.264) and MPEG 2 video encoding and audio processing for up to sixteen audio channels. High Demand and Flexible AVC (H.264) 4:2:0 / 4:2:2 10-bit Video Encoding - MPEG 2 4:2:0 / 4:2:2 Video Encoding - 3G-SDI via 3G Copper and Fiber SFP Video Interfaces - MP1L2, DD, AAC-LC, HE-AAC (2.0 and 5.1) - Passthrough DD, Dolby E, and LPCM - ASI input for External Transport Stream Multiplexing - Simultaneous ASI, RF (DVB-S2X and DVB-CID), and IP Transport (SMPTE 2022 FEC, UDP, RTP, RTMP, Zixi), DVB-S2X & DVB-CID Zixi Link Dolby Digital (Specifications to match Adtec EN-210)

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi‐ CHROMA 4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi‐stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion. Transport Delivery: Unique support for IP Output, Service Filtering & Zixi Link. Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate configurations dependent upon demod. (Specifications to match Adtec RD-71)

• (1ea.) Multi-Function Portable TV/Satellite Signal Analyzer for ATSC Standards (with the same Specifications as the PROMAX Ranger NEO ATSC)

• Foundation and Grounding: Foundation, Kit, Halo grounding CLIN 0003 Install two (2ea) 4.8m and (1ea) 7.3m Antenna System:

• The contractor shall install two (2ea) fully functional motorized 4.8m RX C/Ku-band

Antenna Systems defined in CLIN 0001 and a 7.3m TX/RX Ku-band Antenna System defined in CLIN 0002.

The contractor shall install all necessary cabling from the dish to the pull boxes and from the pull boxes to the associated equipment racks in the main antenna building through the existing conduit.

CLIN 0004 Upgrade existing 3.7m Ku TX antenna system: The contractor shall upgrade the existing 3.7m Ku TX antenna to a fully functional motorized antenna system at DMA’s antenna facility located at 6225 Rock Avenue, Fort Meade, MD 20755, NEW PARTS ONLY, NO GRAY MARKET ITEMS. Upgrade consists of:

• Upgrade Existing 3.7m Ku-Band ASC Signal Antenna - Az/El Jack Assembly Upgrade Kit - Manual to Motorizable, Variable Speed Motorization Kit Az/El Drive, Dual Pol Drive, Indoor Antenna Controller, Outdoor Controller, Interfacility Cabling, 2-Port Ku- Band Universal Feed System, Polarization Cross Axis, Ku-Band Cross Axis Waveguide Kit.

• (1ea.) 1RU 8-Port IP Spectrum Analyzer, accepts all signals from 5 MHz to 3 GHz and input power levels ranging from –110 to +5 dBm. RBW varies from 1 Hz to 15 MHz (compatible spec as SED Decimator D3), All data communication occurs via built-in Ethernet port.

• (1ea.) Multi-Function Portable TV/Satellite Signal Analyzer for ATSC Standards (with the same Specifications as the PROMAX Ranger NEO ATSC)

• (2ea.) Multi-Codec 10-bit Encoder Support for SD/HD, AVC (H.264) and MPEG 2 video encoding and audio processing for up to sixteen audio channels. High Demand and Flexible AVC (H.264) 4:2:0 / 4:2:2 10-bit Video Encoding - MPEG 2 4:2:0 / 4:2:2 Video Encoding - 3G-SDI via 3G Copper and Fiber SFP Video Interfaces - MP1L2, DD, AAC-LC, HE-AAC (2.0 and 5.1) - Passthrough DD, Dolby E, and LPCM - ASI input for External Transport Stream Multiplexing - Simultaneous ASI, RF (DVB-S2X and DVB- CID), and IP Transport (SMPTE 2022 FEC, UDP, RTP, RTMP, Zixi), DVB-S2X & DVB-CID Zixi Link Dolby Digital (Specifications to match Adtec EN-210)

• (2ea.) Decoder SD, HD and 1080P59.94/50 IRD supporting MPEG 2 and MPEG 4 AVC/H.264, multi‐CHROMA 4:2:0 / 4:2:2 and 10-bit. With support for very low latency decoding, an array of IP transport capabilities and DVB-S2X demodulation, supports MPEG 1 Layer 2, AAC-LC, Dolby Digital, Dolby E and Linear PCM audio. Supports DVB-S, S2, and S2X with modes ranging from QPSK to 64APSK and multi‐stream ISI support. Video Decoding: Unique support for 1080P & 10-bit Audio Decoding: Unique support for Dolby Digital, AAC, AAC-6.0 & Audio Expansion. Transport Delivery:

Unique support for IP Output, Service Filtering & Zixi Link. Demodulator: Unique support for 16APSK, 32APSK, DVB-S2X & higher symbol rate configurations dependent upon demod. (Specifications to match Adtec RD-71)

The following were previously included by reference and are now included by full text:

52.219-1 SMALL BUSINESS PROGRAM REPRESENTATIONS (OCT 2014)

(a) Definitions. As used in this provision--

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business concern eligible under the WOSB Program.

Service-disabled veteran-owned small business concern--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and the size standard in paragraph (b) of this provision.

Small disadvantaged business concern, consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States, and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Veteran-owned small business concern means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned small business concern means a small business concern--

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)(1) The North American Industry Classification System (NAICS) code for this acquisition is ___ --[insert NAICS code].

(2) The small business size standard is ___ --[insert size standard].

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(c) Representations. (1) The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a small business concern. (2) [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ___ ] is, [ ___ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(3) [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

(4) Women-owned small business (WOSB) concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(3) of this provision.] The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(4)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ --.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(5) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a women-owned small business concern eligible under the WOSB Program in (c)(4) of this provision.] The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(5)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ --.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(6) [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(7) [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(6) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern.

(8) [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(8)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ --.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(d) Notice.

(1) If this solicitation is for supplies and has been set aside, in whole or in part, for small business concerns, then the clause in this solicitation providing notice of the set-aside contains restrictions on the source of the end items to be furnished.

(2) Under 15 U.S.C. 645(d), any person who misrepresents a firm's status as a business concern that is small, HUBZone small, small disadvantaged, service-disabled veteran-owned small, economically disadvantaged women-owned small, or women-owned small eligible under the WOSB Program in order to obtain a contract to be awarded under the preference programs established pursuant to section 8, 9, 15, 31, and 36 of the Small Business Act or any other provision of Federal law that specifically references section 8(d) for a definition of program eligibility, shall—

(i) Be punished by imposition of fine, imprisonment, or both;

(ii) Be subject to administrative remedies, including suspension and debarment; and

(iii) Be ineligible for participation in programs conducted under the authority of the Act.

(End of provision)

52.225-18 PLACE OF MANUFACTURE (MAR 2015)

(a) Definitions. As used in this clause--

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly--

(1) ( ___ ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) ( ___ ) Outside the United States.

(End of provision)

(End of Summary of Changes)