HF1 Steel RFI.docx

DEFENSE LOGISTICS AGENCY

HIGH FRAGMENTATION 1 STEEL

REQUEST FOR INFORMATION

1. DISCLAIMER: This request for information (RFI) is for planning purposes only and is not a request for quote (RFQ), invitation for bid (IFB), or an obligation on the part of the government to acquire any supplies or services. Responses to this RFI are not quotes or offers and cannot be accepted by the government to form a binding contract. The government will determine if/how to proceed based on the results of this notice. Companies that respond to this notice should not expect to receive feedback regarding submissions. The government will not pay any costs incurred in response to this notice. All costs associated with responding to this RFI will be solely at the expense of the responding party. The information provided in this notice is subject to change and is not binding on the government.

2. LOCATION: Possible material delivery locations are as follows:

· Hammond Depot: 3200 Sheffield Avenue, Hammond, IN 46327-1003

· Hawthorne Depot: 1 South Main Ave., Hawthorne, NV 89415-9404

· Scotia Depot: Route 5, BLDG 12, Scotia, NY 12302

3. OBJECTIVE: The Defense Logistics Agency (DLA) Strategic Materials directorate is seeking information for the potential acquisition of 22,500 metric tons of high fragmentation 1 (HF1) steel for addition into the National Defense Stockpile.

4. SCOPE OF WORK: A draft statement of work (SOW) is not available at this time.

5. DESCRIPTION OF INFORMATION REQUESTED: All interested vendors with experience/capabilities as outlined in this document must provide a capability statement that includes the following:

A. GENERAL DATA

i. Company name.

ii. GSA contract number.

iii. Other government-wide contracts/numbers (e.g., SEWP, JETS, ESI, etc.).

iv. Socioeconomic status(es).

v. CAGE code.

vi. UEI number.

vii. Proposed NAICS code (if different) and size of business relative to proposed NAICS code.

viii. Mailing address.

ix. Name, telephone number, and email address for primary point of contact (POC) with the authority and knowledge to clarify responses with government representatives and can verify the demonstrated capabilities.

x. Any questions or clarification requests regarding the requirement.

xi. Examples of direct experience as a prime contractor performing the stated work – please provide the contract number, agency, the scope/value of the contract, the length of the contract, the functions you did under the contract, and/or the role your company played.

xii. Examples of relevant non-prime experience performing the stated work – please provide the contract number, agency, the scope/value of the contract, the length of the contract, the functions you did under the contract, and/or the role your company played.

xiii. Identify any regulations, certifications, or equipment you have or have used, that are necessary to the function of this requirement.

xiv. Identify your intentions to team or subcontract any work and what percentage of work you are capable of in your own right and what percentage you are subcontracting to similarly situated small businesses and what percentage to other than small businesses (large or non-profit entities).

xv. If you have been mainly a subcontractor, do you have the skill to manage the contract as a prime?

xvi. Does your company have the financial resources to support this effort? Payments are typically made within 30 days of invoice acceptance and invoices are submitted in arrears. If not, then from whom will you get your credit line? Do you already have a credit line? Can you get one big enough to support this contract? Provide your creditors name and the amount you can cover.

B. MATERIAL INFORMATION

i. What grades, forms, and specifications of HF1 steel do you provide?

ii. What grades, forms, and specifications of HF1 Steel are most common for aerospace and defense use? What are these specifications used for?

iii. Are there grade, purity requirements, specifications, or forms of HF1 steel that serve as a baseline for other HF1 steel products or applications? Are there specific purity requirements, specifications, or forms for aerospace and defense?

iv. Are there any known impurities that have adverse effects on performance? What are the common impurities and how do they occur?

v. What are the accepted industry limits of those impurities in the material to be provided?

vi. How are these impurities tested? Please specify which method for which element or compound.

vii. What are the locations of the impurities?

viii. What is the frequency of occurrence for these impurities in a production batch?

ix. How are the impurities tested (what are the industry standard tests and equipment used for those tests)?

x. Do you have an internal laboratory testing the material? What testing is performed? How often is the material tested?

xi. Do you use an external laboratory? If yes, which laboratory do you use? What testing is performed? How often is the material tested?

C. SUPPLY INFORMATION

i. Where is the source of your HF1 steel located? If there are multiple sources, please estimate what percentage of the material comes from which location.

ii. Please describe your supply chain of HF1 steel from source of the material to final processing specifically indicating any instances where the material is not located in the continental United States (CONUS).

iii. What is your annual overall production/throughput/consumption?

iv. Approximately how long it would take to complete production/acquisition of the amount of HF1 steel listed in section 2?

v. Are you involved with recycling this material? If yes, provide a summary of the recycling process.

vi. How do you typically price the material?

vii. Can you provide a current market price for the produced specifications or purity levels?

D. DELIVERY INFORMATION

i. What is your typical time from order to delivery for HF1 steel?

ii. What delivery quantities do you typically provide?

iii. Have you used subcontractors to produce/provide this material?

iv. Where would the deliveries originate from? If there are multiple locations, please list all locations.

v. What is your delivery capacity per year?

vi. Approximately how long it will take to complete deliveries of the amount listed in section 2?

vii. What additional amount of material could you produce per year and/or deliver without disrupting deliveries to your current customers, hiring additional personnel, or expanding output capacity

viii. Approximately what quantity of material would constitute a lot/batch?

ix. Do you provide spot deliveries? If so, typically how much could you provide and in what timeframe could you deliver?

x. Does your company offer a discount for either long-term orders or large volume orders?

xi. What is the preferred method of delivery?

xii. What is the preferred packaging method? Please describe any requirements (crates for handling, boxes, padding, wrapping, stacking, inerting, etc.).

xiii. What are the industry standards for packing?

xiv. Are there any safety concerns with packing or transporting this material?

xv. Any restrictions or other information you deem pertinent to deliveries?

E. STORAGE INFORMATION

i. What are the common storage conditions for HF1 steel?

ii. How long is HF1 steel typically stored for prior to use?

iii. The material will be stored at a government depot. It is not uncommon for NDS inventory to be stored for periods of time exceeding 25 years. Please provide information on the following:

a. Shelf life

b. Environmental impact

c. Regulations

d. Material rotation requirements

iv. Do you have any recommendations for long-term storage?

v. Describe your safety and environmental controls for storage and handling of this material.

F. MARKET INFORMATION

i. Are there frequent changes in the market price for this material? If yes, how do you address those changes?

ii. Does the time of year affect the availability and/or the production of HF1 steel? If yes, how?

iii. In the next two to five years, are there any anticipated manufacturing process changes, technology maturation development programs, or shifts in end-user requirements that are likely to result in a change in the material? If so, what are they?

iv. In the next two to five years, are there any anticipated material substitutions that may drive a transition towards or away from the use of HF1 steel that will affect the demand of the material? If so, what are they?

v. What customer market sector(s) (e.g., military-aerospace, commercial-automotive) purchases your material?

G. ADDITIONAL INFORMATION

i. Do you have provisions for agreements longer than one year? If so, how long is tolerable?

ii. If you were requested to provide sales data identifying the percentage of material sold to the government and the percentage of material sold to the general public, would you comply?

iii. Please submit lessons learned from current or previous contract awards.

6. Any information provided by industry to the government as a result of this RFI is strictly voluntary. Responses will not be returned. As a reminder, no entitlements to payment of any direct or indirect costs or changes to the government will arise as a result of vendor submission of responses or the government’s use of such information. The information obtained from industry responses to this notice may be used in the development of an acquisition strategy and a future RFQ if applicable. The limit for all responses is 20 pages single-sided in Microsoft Word or Adobe PDF format with a maximum of 12-point font on an 8.5 x 11 page with margins of 1”.

7. Interested vendors should submit their response through email to the contract specialist, Joi Downing at joi.downing@dla.mil with “RFI – HF1 Steel” in the subject line. Responses must be sent by noon EDT on September 16, 2025. It is the vendor’s responsibility to ensure the email was received and is viewable.