Helfrich Tractor Specs (1).docx
DOCX document 14 KB Posted
- Attached to
- IDNR Helfrich GPC - orchard tractor
- Solicitation number
- 25-422DNR-LNDMG-B-45210
- Issued by
- Livingston County, Illinois
About this file
This document is a request for quotes from the Illinois Department of Natural Resources for the procurement of one (1) agricultural tractor. The tractor must have a minimum of 30 horsepower, 4-wheel drive, and a maximum height of 6 feet including the ROPS and lights. It must be equipped with a hydrostatic transmission, a front loader capable of lifting 1,000 lbs, and include a bucket, pallet forks, and grapple bucket/claws. The tractor will be used for various tasks such as dirt work, mowing, feeding, and front loader work, in both field and rough terrain conditions. The vendor must provide training on the equipment's operation and maintenance, as well as two copies of the operator and maintenance manuals upon delivery. The pricing shall include freight FOB Destination to the specified site in Lincoln, Illinois.
The document outlines the required technical specifications and features of the tractor, as well as the warranty protection and that the equipment must be new, unused, and free from defects. There are no details provided regarding pricing terms, set asides, incumbents, funding requirements, or sources.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| standard-illinois-certifications-v.23.1~22.pdf | ||
| Standard Terms and Conditions ~28.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The Illinois Department of Natural Resources is requesting quotes for one (1) agricultural tractor. This tractor will be used to pull implements in both field and rough terrain conditions such as pheasant confinement areas and buildings as well as hillsides. Tractor may be used for dirt work, mowing, feeding, and front loader work. Tractor Shall come with the following specs:
*4-wheel drive
*Minimum 30 horsepower to engine *Height including ROPS and lights not to exceed 6’, ROPS is fine to be over that height if it is easily put down. Tractor must get into pheasant pens and pheasant building where some gates and doors are only 6’ tall.
*Minimum of 2 hydraulic remote rear valves, these valves need to be free and not used to power the front loader
*Rear 3-point arm controls preferred (for ease of hook up when outside of cab)
*Front weights (full set) and front weight mounting bracket installed
*Front grill guard
*Engine block heater
*Tractor must come with agricultural tread tires or R4 type of tires. Due to front loader requirements if ballast tires are suggested then tires need to be filled accordingly.
*Hydrostatic Transmission
*Front loader sized and fitted to machine and joystick installed and joystick must be able to operate grapple bucket/claws.
*Front loader needs to include bucket, pallet forks, and grapple bucket/claws. All front loader tools must be of the quick attach type and not pinned.
*Front loader must come with ability to operate grapple bucket/claws
*Front loader must be able to lift and move 1000lbs. in order to move feeders in pens. If ballast is needed in order to lift this weight reliably then ballast must be included, or rear pallet forks so that a feeder may be carried on the front and back.
-Warranty Protection: Standard Manufacturer’s Warranty
-Equipment shall be new, unused and free from defect.
-Pricing shall include Freight FOB Destination to site (1019 1310th Street Lincoln Illinois 62656)
-Vendor to provide training on equipment operation and maintenance upon delivery.
-Vendor shall provide two (2) copies of operator and maintenance manuals upon delivery.
File details come from the government source that posted it. Updated .