HC108426R0013.docx

HC108426R0013

Section SF 1449 - CONTINUATION SHEET

Software

FFP

010 - ABACUS Core. In accordance with the attached PWS.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: 010

PSC CD: DA10

NET AMT

Software

020 - ABACUS Modeler Users. In accordance with the attached PWS.

FOB: Destination

MFR PART NR: 020

NET AMT

Software

030 - ABACUS Editor Users. In accordance with the attached PWS.

FOB: Destination

MFR PART NR: 030

NET AMT

Software

040 - ABACUS Collaborator Users (500 user pack). In accordance with the attached PWS.

FOB: Destination

MFR PART NR: 040

NET AMT

Software

050 - Standard Support. In accordance with the attached PWS.

FOB: Destination

MFR PART NR: 050

NET AMT

Software

090 - Professional Success Package. In accordance with the attached PWS.

FOB: Destination

MFR PART NR: 090

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

1300 EISENHOWER AVE.

FORT LEE VA 23801

Government

1300 EISENHOWER AVE.

FORT LEE VA 23801

Government

1300 EISENHOWER AVE.

FORT LEE VA 23801

Government

1300 EISENHOWER AVE.

FORT LEE VA 23801

Government

1300 EISENHOWER AVE.

FORT LEE VA 23801

Government

1300 EISENHOWER AVE.

FORT LEE VA 23801

Government

DELIVERY INFORMATION

31-JUL-2027

1300 EISENHAUER AVE

FORT LEE VA 23801

TAMIKA JOHNSON

804-734-8000 X 48379 FOB: Destination

HQC007

31-JUL-2027

HQC007

31-JUL-2027

HQC007

31-JUL-2027

HQC007

31-JUL-2027

HQC007

31-JUL-2027

HQC007

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (FEB 2026)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

[Insert evaluation factors in the relative order of importance. For requests for proposals, state: Evaluation factors other than price when combined are [significantly more important than price/approximately equal to price/significantly less important] than price. For invitations for bids, list only price and price-related factors.]

(b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.219-1 SMALL BUSINESS PROGRAM REPRESENTATIONS (FEB 2026) – ALTERNATE II (MAR 2023)

(a) Definitions. As used in this provision-

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business concern eligible under the WOSB Program.

HUBZone small business concern means a small business concern that meets the requirements described in 13 CFR 126.200, is certified by the Small Business Administration (SBA) and designated by SBA as a HUBZone small business concern in the Small Business Search (SBS) ( 13 CFR 126.103).

Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program means an SDVOSB concern that is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300.

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (b) of this provision.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern means a small business concern that-

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by one or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States, and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals who meet the criteria in paragraph (1) of this definition.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127) means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b)(1) The North American Industry Classification System (NAICS) codes and corresponding size standards for this acquisition are as follows; the categories or portions these NAICS codes are assigned to are specified elsewhere in the solicitation:

[Contracting Officer to insert NAICS codes and size standards].

(2) The small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce (i.e., nonmanufacturer), is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition—

(i) Is set aside for small business and has a value above the simplified acquisition threshold;

(ii) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(iii) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(c) Representations.

(1) The Offeror shall represent its small business size status for each one of the NAICS codes assigned to this acquisition under which it is submitting an offer.

[Contracting Officer to insert NAICS codes.]

(2) [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it ___ is, ___ is not a women-owned small disadvantage business concern.

(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The offeror represents as part of its offer that it ___ is, ___ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents as part of its offer that it ___ is, ___ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

(5) SDVOSB joint venture eligible under the SDVOSB Program. [Complete only if the offeror is certified as a SDVOSB concern]. The offeror represents as part of its offer that it ___ is, ___ is not a SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ ]

(6) HUBZone joint venture eligible under the HUBZone Program. [Complete only if the offeror is a HUBZone small business concern.] The offeror represents, as part of its offer, that it ___ is, ___ is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ ] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern.

(d) Notice. Under 15 U.S.C. 645(d), any person who misrepresents a firm’s status as a business concern that is small, HUBZone small, small disadvantaged, service-disabled veteran-owned small, economically disadvantaged women-owned small, or women-owned small eligible under the WOSB Program in order to obtain a contract to be awarded under the preference programs established pursuant to section 8, 9, 15, 31, and 36 of the Small Business Act or any other provision of Federal law that specifically references section 8(d) for a definition of program eligibility, will be—

(1) Punished by imposition of fine, imprisonment, or both;

(2) Subject to administrative remedies, including suspension and debarment; and

(3) Ineligible for participation in programs conducted under the authority of the Act.

52.219-28 POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (FEB 2026)

(a) Definitions. As used in this clause—

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition—

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it is, is not a small business concern under NAICS Code assigned to contract number .

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause.] The Contractor represents that it is, is not, a small disadvantaged business concern as defined in 13 CFR 124.1001.

(3) Women-owned small business (WOSB) joint venture eligible under the WOSB Program. The Contractor represents that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(4) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The Contractor represents that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program. The Contractor represents that it is, is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .]

(6) HUBZone joint venture eligible under the HUBZone Program. [Complete only if the offeror is a HUBZone small business concern. ] The offeror represents, as part of its offer, that It is, is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: . ] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized signer's name and title. ]

(End of clause)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

www.Farsite.hill.af.mil

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.Farsite.hill.af.mil

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (NOV 2020)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

1. The use in this solicitation of any DFARS (48 CFR Chapter 2 provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any DFARS (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)

Substitute the following paragraphs (b), (d) and (e) for paragraphs (b) and (d) of the provision at FAR 52.204-8:

(b)(1) If the provision at FAR 52.204-7, System for Award Management, is included in this solicitation, paragraph (e) of this provision applies.

(2) If the provision at FAR 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (e) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

__ (i) Paragraph (e) applies.

__ (ii) Paragraph (e) does not apply and the Offeror has completed the individual representations and certifications in the solicitation.

(d)(1) The following representations or certifications in the SAM database are applicable to this solicitation as indicated:

(i) 252.204-7016, Covered Defense Telecommunications Equipment or Services--Representation. Applies to all solicitations.

(ii) 252.216-7008, Economic Price Adjustment--Wage Rates or Material Prices Controlled by a Foreign Government. Applies to solicitations for fixed-price supply and service contracts when the contract is to be performed wholly or in part in a foreign country, and a foreign government controls wage rates or material prices and may during contract performance impose a mandatory change in wages or prices of materials.

(iii) 252.225-7042, Authorization to Perform. Applies to all solicitations when performance will be wholly or in part in a foreign country.

(iv) 252.225-7049, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services--Representations. Applies to solicitations for the acquisition of commercial satellite services.

(v) 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism. Applies to all solicitations expected to result in contracts of $150,000 or more.

(vi) 252.229-7012, Tax Exemptions (Italy)--Representation. Applies to solicitations when contract performance will be in Italy.

(vii) 252.229-7013, Tax Exemptions (Spain)--Representation. Applies to solicitations when contract performance will be in Spain.

(2) The following representations or certifications in SAM are applicable to this solicitation as indicated by the Contracting Officer:

____ (i) 252.209-7002, Disclosure of Ownership or Control by a Foreign Government.

____ (ii) 252.225-7000, Buy American--Balance of Payments Program Certificate.

____ (iii) 252.225-7020, Trade Agreements Certificate.

____ Use with Alternate I.

____ (iv) 252.225-7031, Secondary Arab Boycott of Israel.

____ (v) 252.225-7035, Buy American--Free Trade Agreements--Balance of Payments Program Certificate.

____ Use with Alternate I.

____ Use with Alternate II.

____ Use with Alternate III.

____ Use with Alternate IV.

____ Use with Alternate V.

____ (vi) 252.226-7002, Representation for Demonstration Project for Contractors Employing Persons with Disabilities.

____ (vii) 252.232-7015, Performance-Based Payments--Representation.

(e) The Offeror has completed the annual representations and certifications electronically via the SAM website at https://www.sam.gov. After reviewing the SAM database information, the Offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in FAR 52.204-8(c) and paragraph (d) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer, and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [Offeror to insert changes, identifying change by provision number, title, date____]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the Offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications located in the SAM database.

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

Provided upon Award

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

G1 POINTS OF CONTACT (FEB 2025)

Communications with the Contractor will be conducted with the identified Point(s) of Contact (POC). Should a change in POC be required, the Contractor shall initiate this request through notification to the Contracting Officer.

Contracting Officer Name: Adam Venhaus Organization/Office Symbol: PS8413 Phone No.: 667-890-0307 E-Mail Address: adam.m.venhaus.civ@mail.mil

COR/Mission Partner Point of Contact (Note: To be filled in upon contract award) Name:

Organization/Office Symbol:

Phone No.:

E-Mail Address:

Contractor Point of Contact (Note: To be filled in upon contract award) Contractor Legal Business Name:

UEI:

CAGE CODE:

Contractor POC:

E-Mail Address:

Phone Number:

(End of Text)

G2 LINE ITEM AND CONTRACT/ORDER CLOSEOUT (OCT 2021)

Dormant and/or excess funds consist of funds that are primarily in “expired” or “cancelled” status. Expired funds are no longer available for new obligations, but are available for upward adjustments and payments on prior obligations to include payments on contractor invoices. Cancelled funds are no longer available for upward adjustments to obligations or to pay contractor invoices.

Timely contract closeout of the entire contract/order and of completed individual contract line item number(s) (CLIN) and/or sub line item number(s) (SLIN) is a priority under this contract/order. As such, the Contractor shall submit a final invoice no later than ninety (90) calendar days after the expiration of this contract/order and/or at the expiration of any individual CLIN(s)/SLIN(s) that expire before the final expiration of the contract/order (i.e., end item(s) was scheduled to be delivered or the period of performance (base or option year) was completed), unless the Contractor requests and is granted a written extension by the Contracting Officer. In addition, and concurrent with the submission of the final invoice for a specific CLIN/SLIN or for the contract/order in its entirety, the Contractor shall notify the Contracting Officer of the amount of excess funds that can be deobligated from the CLIN/SLIN or contract/order so the deobligation of any excess funds can be completed as soon as possible.

After ninety (90) days from expiration of a CLIN/SLIN, end item delivery, or contract/order in its entirety, unless an extension had been requested and granted by the Contracting Officer in writing, a bilateral contract/order modification to deobligate excess funds and/or closeout the contract/order in its entirety will be forwarded to the Contractor by the Contracting Officer. The modification must be signed and returned to the Contracting Officer within thirty (30) calendar days of receipt . A Contractor’s failure to respond and/or sign the bilateral modification within thirty (30) calendar days of receipt will constitute approval of the terms of the modification and the modification will subsequently be processed unilaterally by the Contracting Officer to deobligate excess funds and/or closeout the contract/order.

For cost reimbursement CLINs/SLINs, contracting officers will use FAR 42.708, Quick-closeout procedures to the maximum extent possible after the contract/order is physically complete. Should the contract/order require audit/review (e.g., audits conducted by the Defense Contract Audit Agency), excess funds/balances from CLIN(s)/SLIN(s) that are not required to satisfy potential adjustments as a result of the review/audit will be removed from the CLIN(s)/SLIN(s) through a bilateral modification. The modification will be forwarded by the Contracting Officer and must be signed by the Contractor and returned within thirty (30) calendar days of receipt. A Contractor’s failure to respond within thirty (30) calendar days of receipt will constitute approval of the terms of the modification and the modification will subsequently be processed unilaterally by the Contracting Officer to remove the excess funds/balances on the associated CLINs/SLINs. If the Contractor disagrees with amount for deobligation they will notify the Contracting Officer promptly with the proposed amount and rationale for deobligation.

Communications with the Contractor will be conducted with the identified Point(s) of Contact (POC) identified in G1 of this contract/order. Should a change in POC be required, the Contractor shall immediately notify the Contracting Officer.

(End of Text)

G4. Submitting Credits to DISA – WAWF Contracts (Dec 2023)

G4 SUBMITTING CREDITS TO DISA – WAWF CONTRACTS (DEC 2023)

If the contractor owes DISA money, the following methods shall be used to process the credit. These are the only methods approved for processing credits; checks will not be accepted.

1. Include Credit in Current Invoice in Wide Area Work Flow (WAWF). The contractor may only use this method if the total invoice amount (current charges minus credit amount) is greater than $0.

1. Submit a Stand-alone Credit Invoice in WAWF. The contractor may only use this method if a future WAWF invoice(s) will be submitted, and the total of the future invoice(s) exceeds the credit amount. DISA will offset the payment of the future invoice(s) by the credit amount.

1. Zero Dollar Invoice in WAWF. The contractor may only use this method to move a previously paid amount on a CLIN/ACRN to a different CLIN/ACRN. The $0 invoice in WAWF shall include a credit to the incorrect CLIN/ACRN and a positive amount to the correct CLIN/ACRN. An alternative method to moving a previously paid amount on a CLIN/ACRN to a different CLIN/ACRN is to submit two invoices: one credit invoice for the incorrect CLIN/ACRN and one invoice for the correct CLIN/ACRN.

1. Pay.gov. The contractor may only use this method if none of the above credit methods are feasible. To submit a credit via Pay.gov, the contractor shall complete the form at https://www.pay.gov/public/form/start/999077677.

When submitting a credit line on an invoice in WAWF, the contractor shall ensure the 4-digit CLIN is listed in the Item Number field and the ACRN is listed in the ACRN field. Invoices referencing an infoSLIN or invoices missing an ACRN for every CLIN will be rejected.

(End of text)

H1 ORGANIZATIONAL AND CONSULTANT CONFLICTS OF INTEREST (OCCI) (JAN 2020)

If the contractor or a subcontractor breaches any of the OCCI restrictions of the contract, to include any OCCI mitigation plan submitted with its offer, or does not disclose or misrepresents any relevant facts concerning its conflict of interest, the government may take appropriate action, including terminating the contract, in addition to any remedies that may be otherwise permitted by the contract or operation of law.

(End of text)

PWS

PERFORMANCE WORK STATEMENT (PWS)

Award

Contract Number:

Task Order Number:

Tracking Number:

1. Contracting Officer’s Representative (COR).

a. Imaan Henson – (804) 734-8000 ext. 48117

b. Tamika Johnson – (804) 734-8000 ext. 48379

2. Contract or Task Order Title. Enterprise Architecture (EA) Tool Licensing, Maintenance, and Support

3. Background. The Defense Commissary Agency (DeCA), headquartered at Fort Lee, Virginia, operates approximately 238 commissaries worldwide to provide groceries and household supplies to authorized military personnel, their families, and other authorized patrons at the lowest practical price. Commissaries function similarly to commercial supermarkets, aiming to offer significant price savings compared to commercial markets. The commissary benefit, established by Congress over a century ago, allows authorized individuals to purchase items at cost, paying a 5% surcharge but no sales tax today. This valued non-pay compensation saves a family of four an estimated 23% annually on their grocery bills. Committed to offering state-of-the-art grocery services, DeCA relies on an agile organization, business processes, and robust Information Technology (IT) systems to manage its worldwide operations efficiently and cost-effectively.

4. Objectives. EA Tool Objectives DeCA requires a robust, data-driven EA tool to manage the current ('As-Is') and future ('To-Be') states of its business, information, and technology architectures. The solution will enable scenario planning, investment analysis, and compliance reporting (including UAF) necessary for effective resource allocation and high-level leadership decision support.

5. Scope. This Performance Work Statement (PWS) defines the requirements for a Contractor to provide a Commercial Off-the-Shelf (COTS) Enterprise Architecture (EA) tool, along with implementation, configuration, training, and sustainment services, to meet the strategic planning needs of the Defense Commissary Agency (DeCA). The tool must fully support all stated functional and non-functional requirements.

6. Performance Requirements. The Contractor shall assist DeCA in performing the following tasks to ensure the successful delivery and operationalization of the EA Tool:

6.1 Task: System Delivery, Installation, Security and User Access Management

The Contractor shall assist DeCA in installing the EA tool according to DeCA’s chosen deployment model (Cloud/SaaS or On-Premises) ensuring all DoD security and compliance requirements are met.

Performance Objectives:

a. Implement and configure Single Sign-On (SSO) and Active Directory (AD) integration to ensure secure access.

b. Ensure the tool adheres to all DoD security mandates, including supporting compliance with applicable NIST frameworks.

c. Demonstrate that the system is performant under expected user and data loads.

d. The system must restrict user access to data and system functionalities based on defined organizational roles (e.g., standard user, administrator, auditor). Permissions shall be assigned to roles, not individual users, to maintain consistency and simplify management.

e. The system shall provide administrators with a simple, intuitive interface to grant, modify, or revoke permissions associated with specific roles or users immediately upon request.

f. All user accounts shall utilize Common Access Card (CAC) authentication as the primary method for login, ensuring compliance with DoD security standards.

g. The system must automate the user account lifecycle processes, including the immediate provisioning of new accounts upon user onboarding and the prompt deprovisioning/disabling of accounts immediately upon a change in employment status or role, to prevent unauthorized access.

h. The tool must be procured as either a FedRAMP Authorized service listed on the marketplace (for Cloud/SaaS deployment) or as a solution capable of on-premise deployment on DeCA infrastructure.

6.2 Task: Architecture and Framework Configuration

The Contractor shall assist DeCA in configuring the EA tool to meet DeCA’s modeling, governance and concurrent access requirements.

Performance Objectives:

a. Configure the tool's customizable meta-model to support DeCA’s specific EA elements and relationships.

b. Fully implement and validate support for required defense and industry frameworks, specifically Unified Architecture Framework (UAF), TOGAF, ArchiMate, and relevant security frameworks.

c. Configure specialized model libraries for Cloud Architectures (e.g., AWS, Azure) and Security Architectures (e.g., NIST, SABSA).

d. Establish necessary user roles, permissions, and ownership controls to support architecture governance.

e. Establish necessary user roles, permissions, and ownership controls to support architecture governance and ensure seamless, concurrent access and editing capabilities for multiple architecture teams and collaborators.

6.3 Task: Data Management and Integration

The Contractor shall assist DeCA in establishing the central repository and data integration pathways.

Performance Objectives:

a. Establish the EA tool as the single, central repository for all architecture data, ensuring versioning and change management capabilities.

b. Provide an operational readable and writable RESTful API for data exchange with external source systems.

c. Configure browser-based interfaces (e.g., editable lists) that allow data owners (non-EA staff) to directly update and govern their assigned data elements.

6.4 Task: Analytical and Reporting Implementation

The Contractor shall assist DeCA in configuring the tool's core analytical capabilities.

Performance Objectives:

a. Configure the analytics engine to execute automated calculations for key metrics, including Cost Roll-ups, Business/Technical Fit Scores, and Risk Scores.

b. Implement and test the capabilities for Scenario Analysis, Impact Analysis, and Gap Analysis.

c. Demonstrate the implementation of Machine Learning (ML) and AI capabilities for predicting future metrics, identifying data anomalies, and recommending rationalization sequences.

d. Create EA Roadmaps (visualizing technology lifecycles) and customized dashboards tailored for DeCA leadership.

6.5 Task: Training and Sustainment

The Contractor shall assist DeCA in ensuring DeCA personnel are fully capable of operating, managing, and sustaining the EA tool.

Performance Objectives:

a. Provide documentation and training to core EA staff on modeling, analytics, and end-to-end traceability best practices.

b. Deliver comprehensive training materials (e.g., tutorials, guides) and professional training services for different user groups (Architects, Data Owners, Data Stewards, Data Editors, and Executives).

c. Provide Tier 3 maintenance and technical support for the solution.

1. Performance Standards

The Contractor's performance will be measured against the following standards:

Data Integrity

System Performance