- TESTING REQUIREMENTS.pdf

Testing Requirements

(A) Circuit shall pass acceptance testing by Telecommunication Provider (TP) prior to acceptance by government.

(B) TP must provide long haul circuit number, local circuit identifier for each end location, and trouble reporting number to government acceptance activity prior to acceptance of the service by government.

(C) (1) Vendor will perform acceptance testing in accordance with ITU-TY.1564 Ethernet service activation test with an EMIX pattern ABCDEFG. The test must be bi-directional using the same data rate in each direction.

(2) Latency, measured round-trip, will be according to the following guidelines:

Within country: less than 25ms;

Within Europe: less than 75ms;

Outside Europe: less than 150ms;

Any APS switchover shall take less than 50 milliseconds.

(D) Test data must be provided to DITCO/DISA via electronic email at the following address:

ainslie.b.benoit.civ@mail.mil and DISA.STUTTGART.DITCO.MBX.POSTAWARD- PL511@MAIL.MIL. Government acceptance testing of the circuit will not commence until receipt of this data and verification by the government that the test data shows that the performance criteria are met.

ACCEPTABLE CONTRACTOR/TP RESPONSE: “UNDERSTAND, WILL COMPLY”.