Blk 3 MFD CDRL A001_Interface_Control_Document Avnx final.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

C. CATEGORY:

TDP _ _ TM _ _ OTHER __ __

D. SYSTEM/ITEM

Multi-Function Display

E. CONTRACT/PR NO.

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

Interface Control Document

3. SUBTITLE

A/MH-6M Block 3.0

4. AUTHORITY (Data Acquisition Document No.)

DI-CMAN-81248A

5. CONTRACT REFERENCE

SOW 3.1, 3.2.1 & 4.3

6. REQUIRING OFFICE

AMSAM-SPT

7. DD 250 REQ

LT

9. DIST

STATEMENT

B

SEE BLK 16

10. FREQUENCY

SEE BLK 16

12. DATE OF 1ST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

Draft

Final

Reg Repro

16. REMARKS

The government shall have Government purpose rights to this document. Contractor format is acceptable.

This document shall describe the mechanical, electrical and software interfaces of the equipment or system. The data shall be sufficient to enable the government to integrate and operate the system without support from the supplier.

Data to be provided includes (but is not limited to):

- Physical dimensions and weight (Installation Drawings, CAD models [I.E. STP files] desired if available)

- Mounting provisions and any special requirements such as orientation or vibration isolation or electrical bonding.

- Any clearance requirements for such things as air intake or outlets.

- Any provisions required for cooling. Any airflow requirements.

- Electrical power requirements, steady state, transient or different operational modes (such as transmit) and recommended breaker size.

- Connector types and part numbers.

- Electrical wiring requirements, signal definitions and levels, any special wire or cable requirements that may affect performance, maximum cable length and point-to point requirements with any interfacing LRU's where applicable (i.e. R/T to control head...etc.)

BLK 8 – Upon submittal the Govt. shall have 45 days from receipt to comment on and/or approve the document. The Govt. shall have 15 days from the receipt of subsequent submittals to comment on and/or approve the document.

BLK 9 – The following information shall be included on the deliverable: Distribution Statement B: Distribution authorized to U.S. Government agencies only to protect technical or operational data or information from automatic dissemination under the International Exchange Program or by other means. This protection covers publications required solely for official use or strictly for administrative or operational purposes. This statement may be applied to manuals, pamphlets, technical orders, technical reports, and other publications containing valuable technical or operational data. Determination made on date of final delivery. Other requests for this document shall be referred to the Technology Applications Program Office, 401 Lee Blvd, Fort Eustis, VA 23604

BLK 10 – As required to obtain approval.

BLK 12 – Draft NLT 45 days DAC BLK 13 – Final NLT 90 days DAC BLK 14a – Letter only to AMSAM-SPK BLK 14b – Electronic copies only. Documents requiring signatures shall have signature page scanned, or digital signature shall be applied.

AMSAM-SPK LT

R

AMSAM-SPT 1 1

15. TOTAL --------- 1 1

G. PREPARED BY

Michael L. Chen

H. DATE

16 February 2015

I. APPROVED BY J. DATE

DD Form 1423-1, JUN 90 (EG) Previous editions are obsolete Page _1_ of _6_ Pages

18. ESTIMATED

TOTAL PRICE

17. PRICE

GROUP