SOW-_Dust_Collection_System.docx

STATEMENT OF WORK

NAVAL SPECIAL WARFARE ADVANCED TRAINING COMMAND

Facilities Building (901) Dust Collection System

1.0 Background: The Naval Special Warfare Advanced Training Command (NSWATC) Building, 901 Carpenter shop have had several Industrial Hygiene assessments. The assessment inspectors’ findings were highly recommended to install a dust collection system. These finding are in accordance with (IAW) (29CFR1910.213) (1) (iii), OSHA 3157 “Guide for Protecting Workers from Woodworking Hazards”.

2.0 Objectives: To procure a dust collection system equipment to comply with OSHA Safety requirements.

3.0 Scope: The vendor shall provide all parts specifications listed below in the requirements section. All parts shall match part numbers listed below to ensure compatibility with existing equipment. Brand name is required, no substitutes without written approval from the Government. Unless otherwise specified, Vendor warrants that all products are new and are in their original packaging. No substitutions are to be supplied without prior written consent. Vendor certifies that the products are entitled to a full warranty and that they are genuine parts.

4.0 Requirements:

Equipment:

UMA-250 Dust Collector or equal

CFM: 2787

Dimensions: 3’x6’x11 Required machines: Chop saw (2), table saw, brand saw, planer, jointer, router, sander, floor sweeper.

Material:

Ducting Flexible Hose Wall brackets

Installation:

Vendor shall install Dust Collection System Equipment and provide equipment training.

No other permits or special access required.

6.0 Security Considerations: Contractors will be escorted by Government Personnel at all times.

7.0 Travel: No government funded travel is authorized for this contract

8.0 Place of Performance: Naval Special Warfare Advanced Training Command (NSWATC) Building, 901, Imperial Beach, CA.

9.0 Period of Performance: 120 days