DRAFT_(NJ)_-_Line_Item_Bid_Sheet_(NJ)-_2017_IDIQ_Contract.xlsx

XLSX spreadsheet 104 KB Posted Dec 15, 2016

Attached to: Solicitation Notice R&A IDIQ (NJ) Federal contract opportunity
Solicitation number: GS-02-P-17-DT-D-0006
Issued by: General Services Administration Public Buildings Service Region 2

About this file

From the source

This is a DRAFT RFP and SOW. This notice does not constitute a solicitation. This announcement is an opportunity for industry to review the DRAFT RFP and SOW and provide the Government with comments/suggestions and/or questions. Any comments/suggestions/questions will be used for planning purposes only. Response to this notice is strictly voluntary. DISCLOSURE NOTIFICATION AND PROCEDURES Please do not submit proprietary information. Any information provided may be used for the project without.

View the file

Other files for this federal contract opportunity

Other files attached to Solicitation Notice R&A IDIQ (NJ), newest first.
File	Type	Posted
QUESTIONS_AND_ANSWERS.pdf	PDF	Dec 19, 2016
DRAFT_(NJ)_SPEC_10OCT16_IDIQR2_SOW_New_Jersey.pdf	PDF	Dec 15, 2016
DRAFT_(NJ)_C201_Small_Business_Set_Aside_GC_Sol_GS-P-02-17-DT-D-0006_NJ.pdf	PDF	Dec 15, 2016
Pre-SolicitationNoticeRAIDIQNJ.docx.pdf	PDF	Nov 9, 2016

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1 INSTRUCTIONS TO OFFERORS: Complete the below sheet by providing the price per unit for each line item listed, for each period of performance. Only columns F, G, H, I and J can be edited. The Total Evaluated Price will be automatically calculated. As applicable, complete the "Travel Multipliers" section, to be utilized for future task orders.

	Item
No.:	Description:	Units:	Div.:	Est.

Annual Quantity: Price Per Unit (Base Year) Price Per Unit (Option Year I) Price Per Unit (Option Year II) Price Per Unit (Option Year III) Price Per Unit (Option Year IV) Extended Price (Base Year) Extended Price (Option Year I) Extended Price (Option Year II) Extended Price (Option Year III) Extended Price (Option Year IV)

1.0	Removal of partition metal stud and drywall with or without plaster skim coat, including demountable partitions and repair damage to other wall surfaces. Remove all debris from Government property.	SF	D	1000.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
2.0	Removal of partition metal stud and drywall with or without plaster skim coat and flattened expanded metal fastened to metal studs, including demountable partitions and repair damage to other wall surfaces. Remove all debris from Government property.	SF	D	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
3.0	Removal of drywall with or without plaster skim coat on one side of partition or wall, including repairing damage to other wall surfaces. Remove all debris from Government property.	SF	D	500.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
4.0	Remove door and frame from drywall and/or demountable partition. Door and frame shall be removed from Government property unless requested to be returned to the Government.	EA	D	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
5.0	Remove lockset from existing door and return to the Government.	EA	D	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
6.0	Removal of bookcases, remove from Government property unless requested to be returned to the Government. Price shall be determined by the square feet face or front view of bookcase.	SF	D	300.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
7.0	Remove carpet tack-less method, glued down, or carpet tile including cleaning of the floor surface and remove from the Government property.	SY	D	250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
8.0	Remove carpet pad any type and remove all debris from Government property, including cleaning of the floor surface.	SY	D	250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
9.0	Remove cove base molding or carpet base and remove from the Government property.	LF	D	250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
10.0	Remove resilient floor tile, including cleaning of the floor surface and remove all debris from Government property.	SF	D	200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
11.0	Remove wall covering, vinyl or fabric, including cleaning of the wall surface and remove from the Government property.	SF	D	300.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
12.0	Remove ceiling tile and suspension system, any type, and remove from the Government property.	SF	D	250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
13.0	Remove ceiling tile only and remove from the Government property.	SF	D	250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
14.0	Remove electrical switch any type and provide cover when needed. Remove electrical wall receptacle any type and provide cover when needed including wiring up to 50'-0".	EA	D	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
15.0	Remove telephone wall, data, or communication outlet and provide cover when needed.	EA	D	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
16.0	Remove electrical floor receptacle flush or pedestal and provide cap and plug assemble. Remove telephone floor outlet flush or pedestal and provide cap and plug assemble.	EA	D	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
17.0	Remove tele-power pole any type and replace ceiling tile.	EA	D	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
18.0	Remove light fixture any type including exit, emergency light.	EA	D	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
19.0	Remove sprinkler head and all associated piping to the main and cap the remaining line piping. Coordinate system shut-down with GSA and building maintenance.	EA	D	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
20.0	Disconnect electrical power, telephone, data, and CAT-2,3,4,5 or 6 cable from system furniture cubicle including 75'-0" of cable.	EA	D	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
21.0	Disassemble and remove existing system furniture cubicle including sorting all parts and transporting to building storage area as designated by Government. Price determined by square footage of cubicle.	LF	D	1750.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
22.0	Furnish and install partition 3⅝" 16 gage metal stud 16" O.C. with flattened expanded metal. Expanded metal 75-9 gauge from the top of the existing partition to the slab above. Removal and reinstallation of the ceiling and all cut outs shall be included in the cost.	SF	F&I	80.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
23.0	Furnish and install partition or ceiling 3⅝", 25 gage metal stud 16" O.C., ⅝" drywall on both sides, including tape and spackle finish of drywall with primer or sealer coat of paint and two finish coats of paint. Furnish and install 4" cove base. This line item shall also be used to close openings in the wall, where doors, window, etc. are removed. Price shall be determined by the square feet of one side.	SF	F&I	2500.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
24.0	Furnish and install partition or ceiling ⅞", 25 gage metal furring strip 16" O.C., ⅝" drywall on one side, including tape and spackle finish of drywall with primer or sealer coat of paint and two finish coats of paint. Furnish and install 4" cove base. Price shall be determined by the square feet of drywall installed.	SF	F&I	120.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
25.0	Furnish and install ⅝" drywall on one side of partition or wall, including tape and spackle finish of drywall with primer or sealer coat of paint and two finish coats of paint. Furnish and install 4" cove base. Price shall be determined by the square feet of drywall installed.	SF	F&I	200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
26.0	Furnish and install flattened expanded metal 75-9 gauge anchored onto existing metal studs. For a finished partition combine with item number 23.	SF	F&I	200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
27.0	Cut and patch opening into existing drywall or plaster, patching of the surface shall include all necessary work for a flush smooth surface to match the existing finish.	SF	F&I	120.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
28.0	Furnish and install access panel hinged type with latching mechanism In drywall, plaster or CMU wall, including cutting opening, patching, one coat primer and two finish coats of paint.	SF	F&I	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
29.0	Furnish and install vision viewing window in any partition with safety glass tempered, tinted or clear and wood or metal frame, shape to be determined by the Government, including cutting opening into the partition, one coat primer or sealer paint and two finish coats of paint on frame.	SF	F&I	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
30.0	Furnish and install mineral fiber sound insulation 3½" thick for walls or ceiling.	SF	F&I	1200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
31.0	Install Government furnished door and frame into any partition including cutting opening into partition, painting the frame with two coats, painting or varnishing the door with two coats and installing all of the door hardware.	EA	F&I	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
32.0	Furnish and Install caulking around exterior surfaces such as areas of roofing. Polyurethane Interior/Exterior Window and Door Caulk, White, Black, Tan, Bronze, Limestone, Gray Multiple external and internal applications including sealing door and window frames, roofing substrates, and cladding joints Bonds to metals, masonry, wood, vinyl, cement fiber board, granite and marble. Low solvent content - under CARB limits. Non-Shrinking

High movement and flexibility. Paintable with multiple coating types. Cures in less than 72 hours

Skin time in less than 24 hours	LF	F&I	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	33.0	Furnish and install door vision into any door with safety glass tempered or fire rated wired, lite tinted or clear glass and wood or metal frame, shape to be determined by the Government. Including cutting opening into the door, one coat primer or sealer paint and two finish coats of paint on frame.	SF	F&I	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	34.0	Furnish and install air louver in any door, wood or metal frame. Including cutting opening into the door, one coat primer or sealer paint and two finish coats of paint on frame.	SF	F&I	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	35.0	Furnish and install door stop or bumper, floor or wall mounted.	EA	F&I	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	36.0	Furnish and install push button cipher lockset Simplex model L1000 with key override, onto any door.	EA	F&I	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	37.0	Install Government furnished carpet tile per the manufactures instructions, contractor to supply all other items including adhesive, any preparation of the floor surface, etc., including removing and reinstalling all floor outlet covers.	SY	F&I	1250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	38.0	Install Government furnished broadloom carpet per the manufactures instructions, contractor to supply all necessary items including adhesive, tack strip, any preparation of the floor surface, etc., including removing and reinstalling all floor outlet covers. (Carpet maybe glued or tacked.)	SY	F&I	1000.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	39.0	Furnish and install carpet pad rubber 80 oz. including preparation of the floor surface, adhesive, etc.	SY	F&I	300.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	40.0	Install Government supplied carpet pad rubber 80 oz. including preparation of the floor surface, adhesive, etc.	SY	F&I	800.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	41.0	Install carpet cove base from the Government supplied material. The contractor to supply all necessary adhesive, staples, and preparation to the surface.	LF	F&I	350.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	42.0	Add to line item 51 if carpet binding is required.	LF	F&I	300.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	43.0	Raise and lower system furniture for removal and the installation of carpet. Cost is based per linear foot of system furniture partition.	LF	F&I	200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	44.0	Furnish and install vinyl cove base ⅛" x 4" or 6" with molded corners. Contractor to supply samples or Government will provide selection of a manufacture and color.	LF	F&I	1250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	45.0	Furnish and install vinyl floor tile 12" x 12" x ⅛" including adhesive and preparation to the floor. Contractor to supply samples or Government will provide selection of a manufacture and color.	SF	F&I	800.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	46.0	Add to line item 55 if the access panels for the replacement of the VTC will be on the floor duct system.	SF	F&I	160.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	47.0	Furnish and install carpet binder bar beveled vinyl or beveled metal. Contractor to supply samples.	LF	F&I	30.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	48.0	Paint ceiling or walls with two coats of low VOC paint as per the order flat, semi-gloss, egg shell, etc. Any conduits, boxes anchored to the wall shall be included if the color is to be the same, preparation shall be also included. The contractor shall provide finish selections to the Government Representative, or the Government will provide selection to the contractor.	SF	F&I	2500.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	49.0	Paint ceiling grid with two coats including cleaning and preparing surface. The cost shall be determined by the square feet of the ceiling to be painted. The contractor shall provide finish selections to the Government Representative, or the Government will provide selection to the contractor.	SF	F&I	1000.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	50.0	Paint or varnish door two coats, finish to be determined per each order. The cost shall be per side (if two sides are required the cost will double). The contractor shall provide finish selections to the Government Representative, or the Government will provide selection to the contractor.	EA	F&I	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	51.0	Paint door frame flat, semi-gloss, or high gloss. The cost shall be per side (if two sides are required the cost will double). The contractor shall provide finish selections to the Government Representative, or the Government will provide selection to the contractor.	EA	F&I	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	52.0	Paint or varnish any type of trim two coats. The contractor shall provide finish selections to the Government Representative, or the Government will provide selection to the contractor.	LF	F&I	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	53.0	Paint or varnish radiator cabinet or fan coil unit (wood or metal units) with one coat primer and two finish coats. Including surface preparation sanding, scraping, etc. The cost will be determined by the square feet of the front view. The contractor shall provide finish selections to the Government Representative, or the Government will provide selection to the contractor.	SF	F&I	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	54.0	Electrostatic paint any metal surface (linear diffuser, toilet partition, etc.), including all preparation, cleaning, sanding, etc. of the surface.	SF	F&I	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	55.0	Paint window sash, frame, etc. one coat primer and two coats finish coats wood or metal, including surface Preparation sanding, scraping, etc. The cost will be Determined by the square feet of the front view.	SF	F&I	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	56.0	Install Government furnished wall covering, vinyl or fabric. Including wall preparation sizing, primer, sanding, etc. The Contractor shall supply all other necessary materials (adhesive, etc.).	SF	F&I	1250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	57.0	Skim coating of existing wall or ceiling surface (drywall, CMU, etc.).	SF	F&I	1250.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	58.0	Install Government furnished bookcases and provide all necessary trim or molding to complete the installation, including touch- up bookcases as required. Price shall be determined by the square feet face or front view of bookcase.	SF	F&I	600.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	59.0	Furnish and install ¾" thick fire retardant plywood required for electrical panel board and telephone equipment including two coats of paint.	SF	F&I	500.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	60.0	Transport and reassemble furniture cubicle including all parts from building storage area to office assemble area as designated by Government. Price determined by square footage of cubicle.	LF	F&I	1750.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	61.0	Relocate existing thermostat electric or pneumatic, including all necessary wiring and piping.	EA	SP	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	62.0	Relocate existing sprinkler head and F.I.T. fitting, replace plain end fitting to match existing, including all necessary piping required for relocation. Also including replacement of ceiling tile if necessary.	EA	SP	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	63.0	Furnish and install sprinkler head and all new components to match the building, including all necessary piping required for installation.	EA	SP	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	64.0	Relocate existing fire bell, pull station, supervision sprinkler device, speaker, including any wiring, conduit, etc. necessary for relocation. Also including patching and painting of existing location, or furnish and install blank cover as indicated on the order.	EA	SP	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	65.0	Furnish and install copper piping or tubing, type "L", ½" or ¾" including all hangers, supports, anchors, fittings, sweating of joints, etc.	LF	M	80.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	66.0	Furnish and install copper piping or tubing, type "L", 1" or 1¼" including all hangers, supports, anchors, fittings, sweating of joints, etc.	LF	M	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	67.0	Furnish and install copper piping or tubing, type "L", 1½" to 2" including all hangers, supports, anchors, fittings, sweating of joints, etc.	LF	M	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	68.0	Furnish and install ball or gate valve ½" or ¾" bronze body, including all necessary fittings, sweating of joints, etc.	EA	M	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	69.0	Furnish and install ball or gate valve 1" or 1¼" bronze body, including all necessary fittings, sweating of joints, etc.	EA	M	30.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	70.0	Furnish and install ball or gate valve 1½" to 2" bronze body, including all necessary fittings, sweating of joints, etc.	EA	M	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	71.0	Furnish and install "No-Hub" cast iron waste line up to 4" including all necessary hangers, supports, anchors, fittings, etc.	LF	M	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	72.0	Furnish and install piping insulation (1" wall fiberglass with all service jacket or ½" wall flexible closed cell foam rubber) for up to 2" piping as per the order.	LF	M	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	73.0	Furnish and install 24" x 24" lay-in type ceiling grid mounted diffuser (T Bar, Round or Perforated) with 8" - 12" diameter neck and round butterfly damper including up to 15'-0" linear feet of insulated flexible duct, spin-in collar, nylon ties and connection into existing air supply duct. Diffuser to match or equal to existing building standard.	EA	M	200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	74.0	Furnish and install 24" x 24" lay-in type ceiling grid mounted plenum air return grille (T Bar, Round, Eggcrate or Perforated type). Grille to match or equal to existing building standard.	EA	M	200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	75.0	Furnish and install variable volume or constant volume mixing boxes with electric motor, pneumatic motor or pressure independent box including hangers and supports. Mixing box to match or equal to existing building standard.	EA	M	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	76.0	Rezone existing light fixture, light to be put on another circuit. Cost determined as one rezone per four fixtures. Rezoning light includes disconnecting and reconnecting of wiring and conduit.	EA	E	160.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	77.0	Relocate existing electrical wall outlet, switch, and power pole, including all necessary wiring and conduit. Also including patching and painting of existing location, or furnish and install blank cover as indicated on the order.	EA	E	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	78.0	Relocate existing telephone wall outlet, including all necessary wiring and conduit. Also including patching and painting of existing location, or furnish and install blank cover as indicated on the order.	EA	E	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	79.0	Relocate existing light fixture, emergency light, and exit light, including patching and painting of existing location, or furnish and install blank cover as indicated on the order.	EA	E	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	80.0	Relocate floor service modules. Line item is for 5000 Wissahickon Ave. Bldg.	EA	E	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	81.0	Furnish and install power pole or system furniture power feed whip (base or top feed). Connect equipment to building power system per specified wiring requirements.	EA	E	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	82.0	Furnish and install electrical wall switch (single pole, three way or four way) as required using a multi conductor MC Cable. All circuits shall be labeled on the panel board, outlet, and print.	EA	E	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	83.0	Furnish and install motion sensor manufacturer and model number to match building standard including up to 50'-0" of wiring.	EA	E	20.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	84.0	Furnish and install electrical wall circuits for system furniture (one dedicated and two general use circuits) complete with box and cover plate, etc. All circuits shall be labeled on the panel board, outlet, and print. All wiring in the electrical closet shall be in EMT.	EA	E	80.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	85.0	Furnish and install electrical (general use or dedicated) duplex wall outlet 20 or 30 amp, 120, 208, or 220 volts. Connect to power source as directed using MC Cable up to 50'-0" of wiring. All circuits shall be labeled on the panel board, outlet, and print. All wiring in the electrical closet shall be in EMT.	EA	E	160.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	86.0	Furnish and install floor electrical (general use or dedicated) duplex floor outlet 20 or 30 amp, 120, 208, or 220 volts. Connect to power source as directed using MC Cable up to 50'-0" of wiring. All circuits shall be labeled on the panel board, outlet, and print.	EA	E	80.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	87.0	Furnish and install floor telephone or data outlet, flush brass, polycarbonate, or pedestal aluminum, including a pull string.	EA	E	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	88.0	Furnish and install plug and concrete patch for floor outlet hole. Concrete shall be flush with the existing floor slab.	EA	E	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	89.0	Furnish and install telephone or data wall outlet box with ½" grommet hole blank plate in the wall and extend ¾" EMT conduit or greenfield per the order to an accessible ceiling location and provide pull string.	EA	E	120.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	90.0	Remove and reinstall carpet to gain access into the floor duct system for the installation of electrical and telephone floor outlets, (cost will be determined per linear foot of carpet removed).	LF	E	160.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	91.0	Furnish and install circuit breaker panel board three phase five wire 120/208 volt or 120/240 volt 225amp, main lug, 42 circuit with one, two, and/or three pole bolt in breakers, as requested by the Government, including disconnect switch, conduit and wire up to 50'-0", etc. All wiring in the electrical closet shall be in EMT.	EA	E	10.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	92.0	Furnish and install 1'-0" x 4'-0", 2'-0" x 2'-0", or 2'-0" x 4'-0", metric equivalent, recessed air handling, troffer deep cell (18) parabolic or prismatic lens, silver reflector, energy saving electronic ballast (dimming ballast per order) and lamps (F32T8 - 2700K to 4100K, 120 or 277 volts). Provide two, three, or four tubes fixture as requested on the order.	EA	E	160.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	93.0	Furnish and install high-hat light fixture parabolic or prismatic lens, Alzak finish, energy saving electronic ballast (single or double ballast) 120 volt or 277 volt 2-26 watt compact fluorescent as per the order.	EA	E	60.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	94.0	Remove and replace existing ballast in the existing troffer (120 volt or 277 volt). Replace ballasts in kind or provide energy savings electronic ballast and relamp fixture as per GSA recommendation.	EA	E	200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	95.0	Remove, wipe, clean, and relamp existing troffer and provide 1, 2, 3, or 4 lamps as per order.	EA	E	400.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	96.0	Furnish and install MC Cable three wire, #12 THNN.	LF	E	500.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	97.0	Furnish and install conductor, single copper, #12 or #10 AWG, THHN or THWN.	LF	E	400.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	98.0	Furnish and install CAT-6 cable including all connectors, termination points, hangers, supports, etc.	LF	E	500.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	99.0	Furnish and install, 4 to 8 conductor telephone cable including all connectors, termination points, hangers, supports, etc.	LF	E	500.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	100.0	Furnish and install conduit (EMT or Wiremold) ¾" or 1" including all necessary fittings, field bends, hangers, anchors, pull string, etc.	LF	E	200.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	101.0	Provide and connect electrical power, telephone, data, and CAT-6 cable to system furniture cubicle including cabling and wiring up to 75'-0".	EA	E	40.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	102.0	Provide an Asbestos Building Inspector, with EPA accreditation training certification and any specific state and/or local licensing required, to perform an asbestos pre-alteration assessment which meets the requirements of a pre-construction survey and provide a report per ASTM E2356-10. Proof of qualifications shall be provided to GSA upon request. Provide all equipment necessary to perform the assessment. Restore destructive sample locations to match their original condition where possible. In addition to the report, submit the survey data electronically in the format of the excel file (asbestos surveys upload template - blank) provided as Attachment with 1 row per homogeneous area (HA) per floor per location. Additional instructions for populating the excel file are provided in Attachment	Daily	SP	30.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	103.0	Provide bulk sample analysis by Polarized Light Microscopy	EA	SP	100.0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0

		Yearly Subtotal:	$ - 0	$ - 0	$ - 0	$ - 0	$ - 0
	Division Key:	Total Evaluated Price:
D	Demolition Line Items					$ - 0
F&I	Furnish and Install Line Items
SP	Specialty Line Items
M	Mechanical Line Items
E	Electrical Line Items

	Units Key:
SF	Square Feet
SY	Square Yards
LF	Linear Feet
EA	Each

Sheet2

Sheet3

File details come from the government source that posted it. Updated Nov 14, 2017.