Green River tractor Spec 2.docx
DOCX document 19 KB Posted
- Attached to
- DNR-Green River -Tractor Lease
- Solicitation number
- 23-422DNR-LNDMG-B-35751
- Issued by
- Henry County, Illinois
About this file
This document is a technical specification for a 120 HP or greater Diesel Tractor required by the Green River Soil and Water Authority (SWA) in Illinois. The tractor must meet minimum requirements for horsepower, engine, transmission, axles, hydraulics, PTO, hitch, and attachments. It must also include a standard cab with OSHA-approved rollover protection, comfort features, and specific instrumentation. The tractor must be a 2019 or newer model and the pricing must include freight and delivery to the specified location in Illinois. The vendor will be required to provide training on operation and maintenance of the equipment upon delivery.
The related state and local contract opportunity is for a Tractor Lease for the Illinois Department of Natural Resources (DNR) - Green River. No additional details are provided on the contract scope, term, or award process.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CPO Notice 2022.05 COVID-19 Protection Clause~73.pdf | ||
| standard terms and conditions~84.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT : Green River SWA Tractor specs Minimum 120 HP Diesel Tractor, Minimum 102 PTO HP, MFWD (Mechanical Front Wheel Drive) Engine:
Minimum 120HP Turbo Diesel, 4 cylinder 4.5 L 275 cu in. Shall meet all current EPA requirements for exhaust.
Liquid Cooled Transmission:
24F/12R Power Reverser Transmission or comparable
Front/Rear Axle:
Mechanical front wheel assist with operator controlled or automatic operation selection Differential lock: Mechanical
Steering and Brakes:
Power Steering Hydraulic Wet Disc Brakes
Hydraulic:
Standard: 66.1 L/min 17.5 gpm hydraulic system with a minimum 3 deluxe SCV with ISO breakaway rear selective control valves and a minimum of 2 mid selective control valves (SCV).
Controls for the SCV shall be located in the operator’s station.
Power Take-Off PTO shall be minimum 102 hp at PTO Independent and either mechanical or hydraulic activated.
Minimum 640/1000 PTO (reversible)
Hitch and Draw Bar:
Manufacturer’s standard Category 2, 3-point hitch shall be provided with rigid anti-sway braces or control block shims designed to reduce hitch sway Swinging drawbar External 3 point hitch control
Attachments required:
Loader Prep Kit Quick attach Loader Heavy duty 85 inch bucket with grapple brackets Joy stick controller
Instrumentation:
Key operated ignition Water and weather-resistant starter switch with neutral start safety switch Throttle Tachometer Fuel Gauge DEF Gauge (Diesel Exhaust Fuel) Hour meter – Electric direct reading Engine – coolant gauge or warning light Air-filter restriction gauge or warning light
Miscellaneous:
Cold start aid – grid heater or glow plugs Fuel tank – Diesel tank clearly labeled “Diesel fuel Only”; Def tank shall be clearly labeled as well Lockable tool box shall be provided and shall be secured to the tractor Slow moving vehicle emblem Flashing hazard lamps and Rotating Warning Light All exterior surfaces normally painted shall be painted manufacturer’s standard colors Grill Guard Fuel tank guard
Operator’s Station Cab – The tractor shall include a standard size cab that shall provide OSHA approved roll-over protection for the operator Rearview mirror – low distortion wide angle vision. Approximately 16” x 6”; Manufacturer’s “Standard” size is acceptable.
Padded air suspension type operator’s seat with standard seat belt Fresh air heater/defroster Standard air conditioner AM/FM Radio with clock Access to cab from either side, with all grab handles and steps Front Windshield Wipers and rear wiper, both with intermittent control Front and rear halogen lights
Tires:
Front – (2) Agricultural Type, Minimum 380/85R24 in. 8PR R1 radial or equivalent in foot print size Rear – (2) Agricultural Type, Minimum 460/85R38 in. 8PR R1 radial or equivalent in foot print size
Warranty Protection: Standard Manufacturer’s Warranty Equipment shall be 2019 or newer free from defect.
Pricing shall include Freight FOB Destination 375 Game Road, Harmon Il 61042.
Vendor to provide training on equipment operation and maintenance upon delivery.
Vendor shall provide two (2) copies of operator and maintenance manuals upon delivery.
File details come from the government source that posted it. Updated .