Golf Course Clausesv1.pdf

DOCUMENT NUMBER

FA309925QP010

CLAUSES INCORPORATED BY REFERENCE

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE YEAR-

MO

SECTION

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

2016-10 SEC K

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

2024-05 SEC I

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC L 252.204-7020 NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC I

252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement.

2023-01 SEC I

252.206-7000 Domestic Source Restriction. 2023-08 SEC L 252.227-7002 Readjustment of Payments. 2019-09 SEC I 252.227-7003 Termination. 1984-08 SEC I

252.227-7013 Rights in Technical Data-Other Than Commercial Products and Commercial Services.

2025-01 SEC I

252.227-7013 ALT I Rights in Technical Data-Other Than Commercial Products and Commercial Services. (Alternate I)

2025-01 SEC I

252.227-7013 ALT II Rights in Technical Data-Other Than Commercial Products and Commercial Services. (Alternate II)

2025-01 SEC I

252.227-7015 Technical Data-Commercial Products and Commercial Services.

2025-01 SEC I

252.227-7015 ALT I Technical Data-Commercial Products and Commercial Services. (Alternate I)

2025-01 SEC I

252.227-7016 Rights in Bid or Proposal Information. 2025-01 SEC I 252.227-7019 Validation of Asserted Restrictions--Computer Software. 2025-01 SEC I 252.227-7020 Rights in Special Works. 1995-06 SEC I 252.227-7021 Rights in Data--Existing Works. 1979-03 SEC I 252.227-7022 Government Rights (Unlimited). 1979-03 SEC I 252.227-7023 Drawings and Other Data to Become Property of Government. 1979-03 SEC I 252.227-7024 Notice and Approval of Restricted Designs. 1984-04 SEC I 252.227-7025 Limitations on the Use or Disclosure of Government-Furnished 2025-01 SEC I 252.227-7026 Deferred Delivery of Technical Data or Computer Software. 1988-04 SEC I 252.227-7027 Deferred Ordering of Technical Data or Computer Software. 1988-04 SEC I

252.227-7028 Technical Data or Computer Software Previously Delivered to the Government.

1995-06 SEC K

252.227-7030 Technical Data-Withholding of Payment. 2000-03 SEC I 252.227-7032 Rights in Technical Data and Computer Software (Foreign). 1975-06 SEC I 252.227-7037 Validation of Asserted Restrictions on Technical Data. 2025-01 SEC I

252.227-7040 Additional Preaward Requirements for Small Business Technology Transfer Program.

2025-01 SEC L

252.227-7041 Additional Postaward Requirements for Small Business Technology Transfer Program.

2025-01 SEC I

252.232-7010 Levies on Contract Payments. 2006-12 SEC I 252.239-7001 Information Assurance Contractor Training and Certification. 2008-01 SEC I

52.227-1 Authorization and Consent. 2020-06 SEC I 52.227-1 ALT I Authorization and Consent. (Alternate I) 1984-04 SEC I 52.227-1 ALT II Authorization and Consent. (Alternate II) 1984-04 SEC I 52.227-13 ALT II Patent Rights-Ownership by the Government. (Alternate II) 2007-12 SEC I 52.227-14 Rights in Data-General. 2014-05 SEC I 52.227-14 ALT I Rights in Data-General. (Alternate I) 2007-12 SEC I

Representation of Limited Rights Data and Restricted

52.227-15 Computer Software. 2007-12 SEC K 52.227-16 Additional Data Requirements. 1987-06 SEC I 52.227-17 Rights in Data-Special Works. 2007-12 SEC I 52.227-18 Rights in Data-Existing Works. 2007-12 SEC I 52.227-22 Major System-Minimum Rights. 1987-06 SEC I 52.201-1 Acquisition 360: Voluntary Survey. 2023-09 SEC L

52.240-1 Prohibition on Unmanned Aircraft Systems Manufactured or

Assembled by American Security Drone Act-Covered Foreign Entities.

2024-11 SEC I

252.225-7000 Buy American--Balance of Payments Program Certificate. 2024-02 SEC K

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.

2023-06 SEC K

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

2017-01 SEC I

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

2021-11 SEC K

52.223-23 Sustainable Products and Services. 2024-05 SEC I

52.232-33 Payment by Electronic Funds Transfer-System for Award Management.

2018-10 SEC I

52.232-40 Providing Accelerated Payments to Small Business Subcontractors.

2023-03 SEC I

52.211-6 Brand Name or Equal. 1999-08 SEC L 52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 SEC I

252.204-7003 Control of Government Personnel Work Product. 1992-04 SEC I

252.204-7016 Covered Defense Telecommunications Equipment or Services- Representation.

2019-12 SEC K

252.204-7022 Expediting Contract Closeout. 2021-05 SEC I 252.225-7016 Restriction on Acquisition of Ball and Roller Bearings. 2023-01 SEC I

CLAUSES IN FULL TEXT

CLAUSE

NO

CLAUSE TITLE ALT NO/

DEV NO

YEAR-

MO

CLAUSE TEXT

52.204-29 Federal Acquisition Supply Chain Security Act Orders-

Representation and Disclosures.

2023-12

Federal Acquisition Supply Chain Security Act Orders-Representation and Disclosures (Dec 2023)

(a) As used in this provision, Definitions. Covered article, FASCSA order, Intelligence community, National security system, Reasonable inquiry, Sensitive compartmented information, Sensitive and have the meaning provided in the clause 52.204-30, compartmented information system, Source Federal Acquisition Supply Chain Security Act Orders-Prohibition.

(b) Contractors are prohibited from providing or using as part of the performance of the Prohibition.

contract any covered article, or any products or services produced or provided by a source, if the prohibition is set out in an applicable Federal Acquisition Supply Chain Security Act (FASCSA) order, as described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition.

.(c) Procedures

(1) The Offeror shall search for the phrase "FASCSA order" in the System for Award Management (SAM)( for any covered article, or any products or services produced or provided https://www.sam.gov) by a source, if there is an applicable FASCSA order described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition.

(2) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM, but are effective and do apply to the solicitation and resultant contract (see FAR 4.2303(c)(2)).

(3) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation.

(d) By submission of this offer, the offeror represents that it has conducted a Representation.

reasonable inquiry, and that the offeror does not propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (e).

(e) The purpose for this disclosure is so the Government may decide whether to issue a Disclosures.

waiver. For any covered article, or any products or services produced or provided by a source, if the covered article or the source is subject to an applicable FASCSA order, and the Offeror is unable to represent compliance, then the Offeror shall provide the following information as part of the offer:

(1) Name of the product or service provided to the Government;

(2) Name of the covered article or source subject to a FASCSA order;

(3) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Offeror;

(4) Brand;

(5) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(6) Item description;

(7) Reason why the applicable covered article or the product or service is being provided or used;

(f) The contracting officer will review disclosures provided in Executive agency review of disclosures.

paragraph (e) to determine if any waiver may be sought. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise subject to a FASCSA order and may instead make an award to an offeror that does not require a waiver.

(End of provision)

252.211-7003 Item Unique Identification and Valuation. 2023-01

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" " means the entity (e.g., a manufacturer or vendor) responsible for assigning Enterprise unique item identifiers to items.

" identifier" means a code that is uniquely assigned to an enterprise by an issuing Enterprise agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" or batch number" means an identifying number assigned by the enterprise to a Lot designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again.

The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.

The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle (3) Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) identifier (if concatenated unique item identifier is used). Enterprise

(5) Original part number (if there is serialization within the original part number).

(6) or batch number (if there is serialization within the lot or batch number). Lot

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) identifier (if concatenated unique item identifier is used).** Enterprise

(6) Original part number (if there is serialization within the original part number).**

(7) or batch number (if there is serialization within the lot or batch number).** Lot

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site /uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , ____ Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique Subcontracts identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Notification of Competition Limited to Eligible 8(a) Participants-

252.219-7010 Partnership Agreement. 2019-10

NOTIFICATION OF COMPETITION LIMITED TO ELIGIBLE 8(A) PARTICIPANTS-

PARTNERSHIP AGREEMENT (OCT 2019)

(a) Offers are solicited only from small business concerns expressly certified by the Small Business Administration (SBA) for participation in SBA's 8(a) Program and which meet the following criteria at the time of submission of offer:

(1) The Offeror is in conformance with the 8(a) support limitation set forth in its approved business plan.

(2) The Offeror is in conformance with the Business Activity Targets set forth in its approved business plan or any remedial action directed by SBA.

(3) If the competition is to be limited to 8(a) concerns within one or more specific SBA regions or districts, then the offeror's approved business plan is on the file and serviced by . ____ [Contracting Officer completes by inserting the appropriate SBA District and/or Regional Office(s) as identified by SBA.]

(b) By submission of its offer, the Offeror represents that it meets all of the criteria set forth in paragraph (a) of this clause.

(c) Any award resulting from this solicitation will be made directly by the Contracting Officer to the successful 8(a) offeror selected through the evaluation criteria set forth in this solicitation.

(d)(1) Unless SBA has waived the requirements of paragraphs (d)(1)(i) through (iii) and (d)(2) of this clause in accordance with 13 CFR 121.1204, a small business concern that provides an end item it did not manufacture, process, or produce, shall-

(i) Provide an end item that a small business has manufactured, processed, or produced in the United States or its outlying areas; for kit assemblers, see paragraph (d)(2) of this clause instead;

(ii) Be primarily engaged in the retail or wholesale trade and normally sell the type of item being supplied; and

(iii) Take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice; for example, providing storage, transportation, or delivery.

(2) When the end item being acquired is a kit of supplies, at least 50 percent of the total cost of the components of the kit shall be manufactured, processed, or produced by small businesses in the United States or its outlying areas.

(3) The requirements of paragraphs (d)(1)(i) through (iii) and (d)(2) of this clause do not apply to construction or service contracts.

(e) The will notify the ____ [insert name of SBA's contractor] ____ [insert name of contracting Contracting Officer in writing immediately upon entering an agreement (either oral or written) agency] to transfer all or part of its stock or other ownership interest to any other party.

(End of clause)

252.227-7004 License Grant. 1984-08

LICENSE GRANT (AUG 1984)

(a) The Contractor hereby grants to the Government an irrevocable, nonexclusive, nontransferable, and paid up license under the following patents, applications for patent, and any patents granted on such applications, and under any patents which may issue as the result of any reissue, division or continuation thereof, to practice by or cause to be practiced for the Government throughout the world, any and all of the inventions thereunder, in the manufacture and use of any article or material, in the use of any method or process, and in the disposition of any article or material in accordance with law:

Patent No. U.S. ____ Date ____

Application Serial No. ____ Filing Date ____ together with corresponding foreign patents and foreign applications for patents, insofar as the Contractor has the right to grant licenses thereunder without incurring an obligation to pay royalties or other compensation to others solely on account of such grant.

(b) No rights are granted or implied by the agreement under any other patents other than as provided above or by operation of law.

(c) Nothing contained herein shall limit any rights which the Government may have obtained by virtue of prior contracts or by operation of law or otherwise.

(End of clause)

252.227-7017 Identification and Assertion of Use, Release, or Disclosure

Restrictions.

2025-01

IDENTIFICATION AND ASSERTION OF USE, RELEASE, OR DISCLOSURE RESTRICTIONS

(JAN 2025)

(a) . As used in this provision- Definitions

"Computer software" is defined in-

(1) The 252.227-7014, Rights in Other Than Commercial Computer Software and Other Than Commercial Computer Software Documentation, clause of this solicitation; or

(2) If this solicitation contemplates a contract under the Small Business Innovation Research Program or Small Business Technology Transfer Program, the 252.227-7018, Rights in Other Than Commercial Technical Data and Computer Software-Small Business Innovation Research Program and Small Business Technology Transfer Program, clause of this solicitation.

"SBIR/STTR data" is defined in the 252.227-7018, Rights in Other Than Commercial Technical Data and Computer Software-Small Business Innovation Research Program and Small Business Technology Transfer Program, clause of this solicitation.

"Technical data" is defined in-

(1) The 252.227-7013, Rights in Technical Data-Other Than Commercial Products and Commercial Services, clause of this solicitation; or

(2) If this solicitation contemplates a contract under the Small Business Innovation Research Program or Small Business Technology Transfer Program, the 252.227-7018, Rights in Other Than Commercial Technical Data and Computer Software-Small Business Innovation Research Program and Small Business Technology Transfer Program, clause of this solicitation.

(b) The identification and assertion requirements in this provision apply only to technical data, including computer software documentation, or computer software to be delivered with other than unlimited rights. For contracts to be awarded under the Small Business Innovation Research (SBIR) Program or Small Business Technology Transfer (STTR) Program, these requirements apply to SBIR /STTR data that will be generated under the resulting contract and will be delivered with SBIR/STTR data rights and to any other data that will be delivered with other than unlimited rights. Notification and identification are not required for restrictions based solely on copyright.

(c) Offers submitted in response to this solicitation shall identify, to the extent known at the time an offer is submitted to the Government, the technical data or computer software that the Offeror, its subcontractors or suppliers, or potential subcontractors or suppliers, assert should be furnished to the Government with restrictions on use, release, or disclosure.

(d) The Offeror's assertions, including the assertions of its subcontractors or suppliers or potential subcontractors or suppliers, shall be submitted as an attachment to its offer in the following format, dated and signed by an official authorized to contractually obligate the Offeror:

Identification and Assertion of Restrictions on the Government's Use, Release, or Disclosure of Technical Data or Computer Software.

The Offeror asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following technical data or computer software should be restricted:

Technical Data or

Computer Software Name of Person to be Furnished Basis for Asserted Rights Asserting

With Restrictions1 Assertion2 Category3 Restrictions4

____(LIST)5 ____(LIST) ____(LIST) ____(LIST)

1 For technical data (other than computer software documentation) pertaining to items, components, or processes developed at private expense, identify both the deliverable technical data and each such item, component, or process. For computer software or computer software documentation identify the software or documentation.

2 Generally, development at private expense, either exclusively or partially, is the only basis for asserting restrictions. For technical data, other than computer software documentation, development refers to development of the item, component, or process to which the data pertain. The Government's rights in computer software documentation generally may not be restricted. For computer software, development refers to the software. Indicate whether development was accomplished exclusively or partially at private expense. If development was not accomplished at private expense, or for computer software documentation, enter the specific basis for asserting restrictions.

3 Enter asserted rights category (e.g., government purpose license rights from a prior contract, rights in SBIR/STTR data generated under a contract resulting from this solicitation or under another contract, limited, restricted, or government purpose rights under a contract resulting from this solicitation or under a prior contract, or specially negotiated licenses).

4 Corporation, individual, or other person, as appropriate.

5 Enter "none" when all data or software will be submitted without restrictions.

Date ____

Printed Name and Title ____

Signature ____

(End of identification and assertion)

(e) An offeror's failure to submit, complete, or sign the notification and identification required by paragraph (d) of this provision with its offer may render the offer ineligible for award.

(f) If the Offeror is awarded a contract, the assertions identified in paragraph (d) of this provision shall be listed in an attachment to that contract. Upon request by the Contracting Officer, the Offeror shall provide sufficient information to enable the Contracting Officer to evaluate any listed assertion.

(End of provision)

252.227-7018 Rights in Other Than Commercial Technical Data and Computer

Software-Small Business Innovation Research Program and Small Business Technology Transfer Program.

2025-01

RIGHTS IN OTHER THAN COMMERCIAL TECHNICAL DATA AND COMPUTER

SOFTWARE-SMALL BUSINESS INNOVATION RESEARCH PROGRAM AND SMALL

BUSINESS TECHNOLOGY TRANSFER PROGRAM (JAN 2025)

(a) . As used in this clause- Definitions

"Commercial computer software" means software developed or regularly used for nongovernmental purposes which-

(1) Has been sold, leased, or licensed to the public;

(2) Has been offered for sale, lease, or license to the public;

(3) Has not been offered, sold, leased, or licensed to the public but will be available for commercial sale, lease, or license in time to satisfy the delivery requirements of this contract; or

(4) Satisfies a criterion expressed in paragraph (1), (2), or (3) of this definition and would require only minor modification to meet the requirements of this contract.

"Computer database" means a collection of recorded data in a form capable of being processed by a computer. The term does not include computer software.

"Computer program" means a set of instructions, rules, or routines, recorded in a form that is capable of causing a computer to perform a specific operation or series of operations.

"Computer software" means computer programs, source code, source code listings, object code listings, design details, algorithms, processes, flow charts, formulae, and related material that would enable the software to be reproduced, recreated, or recompiled. Computer software does not include computer databases or computer software documentation.

"Computer software documentation" means owner's manuals, user's manuals, installation instructions, operating instructions, and other similar items, regardless of storage medium, that explain the capabilities of the computer software or provide instructions for using the software.

"Covered Government support contractor" means a contractor (other than a litigation support contractor covered by 252.204-7014) under a contract, the primary purpose of which is to furnish independent and impartial advice or technical assistance directly to the Government in support of the Government's management and oversight of a program or effort (rather than to directly furnish an end item or service to accomplish a program or effort), provided that the contractor-

(1) Is not affiliated with the prime contractor or a first-tier subcontractor on the program or effort, or with any direct competitor of such prime contractor or any such first-tier subcontractor in furnishing end items or services of the type developed or produced on the program or effort; and

(2) Receives access to the technical data or computer software for performance of a Government contract that contains the clause at 252.227-7025, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends.

"Detailed manufacturing or process data" means technical data that describe the steps, sequences, and conditions of manufacturing, processing or assembly used by the manufacturer to produce an item or component or to perform a process.

"Developed" means-

(1) (Applicable to technical data other than computer software documentation.) An item, component, or process, exists and is workable. Thus, the item or component must have been constructed or the process practiced. Workability is generally established when the item, component, or process has been analyzed or tested sufficiently to demonstrate to reasonable people skilled in the applicable art that there is a high probability that it will operate as intended. Whether, how much, and what type of analysis or testing is required to establish workability depends on the nature of the item, component, or process, and the state of the art. To be considered "developed," the item, component, or process need not be at the stage where it could be offered for sale or sold on the commercial market, nor must the item, component or process be actually reduced to practice within the meaning of Title 35 of the United States Code;

(2) A computer program has been successfully operated in a computer and tested to the extent sufficient to demonstrate to reasonable persons skilled in the art that the program can reasonably be expected to perform its intended purpose;

(3) Computer software, other than computer programs, has been tested or analyzed to the extent sufficient to demonstrate to reasonable persons skilled in the art that the software can reasonably be expected to perform its intended purpose; or

(4) Computer software documentation required to be delivered under a contract has been written, in any medium, in sufficient detail to comply with requirements under that contract.

"Developed exclusively at private expense" means development was accomplished entirely with costs charged to indirect cost pools, costs not allocated to a government contract, or any combination thereof.

(1) Private expense determinations should be made at the lowest practicable level.

(2) Under fixed-price contracts, when total costs are greater than the firm-fixed-price or ceiling price of the contract, the additional development costs necessary to complete development shall not be considered when determining whether development was at government, private, or mixed expense.

"Developed exclusively with government funds" means development was not accomplished exclusively or partially at private expense.

"Developed with mixed funding" means development was accomplished partially with costs charged to indirect cost pools and/or costs not allocated to a government contract, and partially with costs charged directly to a government contract.

"Form, fit, and function data" means technical data that describe the required overall physical, functional, and performance characteristics (along with the qualification requirements, if applicable) of an item, component, or process to the extent necessary to permit identification of physically and functionally interchangeable items.

"Generated" means, with respect to technical data or computer software, first created in the performance of this contract.

"Government purpose" means any activity in which the United States Government is a party, including cooperative agreements with international or multi-national defense organizations or sales or transfers by the United States Government to foreign governments or international organizations.

Government purposes include competitive procurement, but do not include the rights to use, modify, reproduce, release, perform, display, or disclose technical data or computer software for commercial purposes or authorize others to do so.

"Government purpose rights" means the rights to-

(1) Use, modify, reproduce, release, perform, display, or disclose technical data or computer software within the Government without restriction; and

(2) Release or disclose technical data or computer software outside the Government and authorize persons to whom release or disclosure has been made to use, modify, reproduce, release, perform, display, or disclose that data for United States Government purposes.

"Limited rights" means the rights to use, modify, reproduce, release, perform, display, or disclose technical data, in whole or in part, within the Government. The Government may not, without the written permission of the party asserting limited rights, release or disclose the technical data outside the Government, use the technical data for manufacture, or authorize the technical data to be used by another party, except that the Government may reproduce, release, or disclose such data or authorize the use or reproduction of the data by persons outside the Government if-

(1) The production, release, disclosure, or use is-

(i) Necessary for emergency repair and overhaul; or

(ii) A release or disclosure to-

(A) A covered Government support contractor in performance of its covered Government support contracts for use, modification, reproduction, performance, display, or release or disclosure to a person authorized to receive limited rights technical data; or

(B) A foreign government, of technical data other than detailed manufacturing or process data, when use of such data by the foreign government is in the interest of the Government and is required for evaluational or informational purposes;

(2) The recipient of the technical data is subject to a prohibition on the further reproduction, release, disclosure, or use of the technical data; and

(3) The Contractor or subcontractor asserting the restriction is notified of such reproduction, release, disclosure, or use.

"Minor modification" means a modification that does not significantly alter the nongovernmental function or purpose of computer software or is of the type customarily provided in the commercial marketplace.

"Other than commercial computer software" means software that does not qualify as commercial computer software under the definition of "commercial computer software" of this clause.

"Restricted rights" apply only to other than commercial computer software and mean the Government's rights to-

(1) Use a computer program with one computer at one time. The program may not be accessed by more than one terminal or central processing unit or time shared unless otherwise permitted by this contract;

(2) Transfer a computer program to another Government agency without the further permission of the Contractor if the transferor destroys all copies of the program and related computer software documentation in its possession and notifies the licensor of the transfer. Transferred programs remain subject to the provisions of this clause;

(3) Make a reasonable number of copies of the computer software required for the purposes of safekeeping (archive), backup, modification, or other activities authorized in paragraphs (1), (2), and

(4) through (7) of this definition;

(4) Modify computer software provided that the Government may-

(i) Use the modified software only as provided in paragraphs (1) and (3) of this definition; and

(ii) Not release or disclose the modified software except as provided in paragraphs (2), (5), (6), and (7) of this definition;

(5) Use and permit contractors or subcontractors performing service contracts (see 37.101 of the Federal Acquisition Regulation) in support of this or a related contract to use, computer software to diagnose and correct deficiencies in a computer program, to modify computer software to enable a computer program to be combined with, adapted to, or merged with other computer programs or when necessary to respond to urgent tactical situations, provided that-

(i) The Government notifies the party which has granted restricted rights that any such release or disclosure to particular contractors or subcontractors was made;

(ii) Such contractors or subcontractors are subject to the nondisclosure agreement at 227.7103-7 of the Defense Federal Acquisition Regulation Supplement or are Government contractors receiving access to the software for performance of a Government contract that contains the clause at 252.227-7025, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends;

(iii) The Government shall not permit the recipient to decompile, disassemble, or reverse engineer the software, or use software decompiled, disassembled, or reverse engineered by the Government pursuant to paragraph (4) of this definition, for any other purpose; and

(iv) Such use is subject to the limitations in paragraphs (1) through (3) of this definition;

(6) Use, and permit contractors or subcontractors performing emergency repairs or overhaul of items or components of items procured under this or a related contract to use, the computer software when necessary to perform the emergency repairs or overhaul, or to modify the computer software to reflect the repairs or overhaul made, provided that-

(i) The intended recipient is subject to the nondisclosure agreement at 227.7103-7 or is a Government contractor receiving access to the software for performance of a Government contract that contains the clause at 252.227-7025, Limitations on the Use or Disclosure of Government Furnished Information Marked with Restrictive Legends;

(ii) The Government shall not permit the recipient to decompile, disassemble, or reverse engineer the software, or use software decompiled, disassembled, or reverse engineered by the Government pursuant to paragraph (4) of this definition, for any other purpose; and

(iii) Such use is subject to the limitations in paragraphs (1) through (3) of this definition;

and

(7) Use, modify, reproduce, perform, display, or release or disclose computer software to a person authorized to receive restricted rights computer software for management and oversight of a program or effort, and permit covered Government support contractors in the performance of covered Government support contracts that contain the clause at 252.227-7025, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends, to use, modify, reproduce, perform, display, or release or disclose the computer software to a person authorized to receive restricted rights computer software, provided that-

(i) The Government shall not permit the covered Government support contractor to decompile, disassemble, or reverse engineer the software, or use software decompiled, disassembled, or reverse engineered by the Government pursuant to the paragraph (4) of this definition, for any other purpose; and

(ii) Such use is subject to the limitations in paragraphs (1) through (4) of this definition.

"Small Business Innovation Research/Small Business Technology Transfer (SBIR/STTR) data" means all technical data or computer software developed or generated in the performance of a phase I, II, or III SBIR/STTR contract or subcontract.

"SBIR/STTR data protection period" means the time period during which the Government is obligated to protect SBIR/STTR data against unauthorized use and disclosure in accordance with SBIR /STTR data rights. The SBIR/STTR data protection period begins on the date of award of the contract under which the SBIR/STTR data are developed or generated and ends 20 years after that date unless, after the award, the agency and the Contractor negotiate for some other protection period for the SBIR /STTR data developed or generated under that contract.

"SBIR/STTR data rights" means the Government's rights, during the SBIR/STTR data protection period, in SBIR/STTR data covered by paragraph (c)(5) of this clause, as follows:

(1) Limited rights in such SBIR/STTR technical data; and

(2) Restricted rights in such SBIR/STTR computer software.

"Technical data" means recorded information, regardless of the form or method of the recording, of a scientific or technical nature (including computer software documentation). The term does not include computer software or financial, administrative, cost or pricing, or management information, or information incidental to contract administration.

"Unlimited rights" means rights to use, modify, reproduce, release, perform, display, or disclose, technical data or computer software in whole or in part, in any manner and for any purpose whatsoever, and to have or authorize others to do so.

(b) . This clause governs all SBIR/STTR data. For any data that are not SBIR/STTR Applicability data-

(1) The clause at Defense Federal Acquisition Regulation Supplement (DFARS) 252.227- 7013, Rights in Technical Data-Other Than Commercial Products and Commercial Services, governs the technical data pertaining to other than commercial products and commercial services or to any portion of a commercial product or commercial service that was developed in any part at Government expense, and the clause at DFARS 252.227-7015, Technical Data-Commercial Products and Commercial Services, governs the technical data pertaining to any portion of a commercial product or commercial service that was developed exclusively at private expense;

(2) The clause at DFARS 252.227-7014, Rights in Other Than Commercial Computer Software and Other Than Commercial Computer Software Documentation, governs other than commercial computer software and other than commercial computer software documentation; and

(3) A license consistent with DFARS 227.7202 governs commercial computer software and commercial computer software documentation.

(c) . The Contractor grants or shall obtain for the Rights in technical data and computer software Government the following royalty-free, worldwide, nonexclusive, irrevocable license rights in technical data or other than commercial computer software. All rights not granted to the Government are retained by the Contractor.

(1) . The Government shall have unlimited rights in technical data or Unlimited rights computer software, including such data generated under this contract, that are-

(i) Form, fit, and function data;

(ii) Necessary for installation, operation, maintenance, or training purposes (other than detailed manufacturing or process data);

(iii) Corrections or changes to Government-furnished technical data or computer software;

(iv) Otherwise publicly available or have been released or disclosed by the Contractor or a subcontractor without restrictions on further use, release, or disclosure other than a release or disclosure resulting from the sale, transfer, or other assignment of interest in the technical data or computer software to another party or the sale or transfer of some or all of a…