GLADWIN HIGH SCHOOL PRESSBOX SPECIFICATION.docx
DOCX document 13 KB Posted
- Attached to
- Stadium Bleachers
- Solicitation number
- RFP - GLAD - 240000000276
- Issued by
- Gladwin County, Michigan
About this file
This document is a specification for a metal structure press box to be installed at Redford Union High School in Michigan. The press box is required to be 16 feet wide by 60 feet long, with a 10-foot by 54-foot interior space. It must have an independently supported structure connected to the rear of the grandstand, and include features such as landings, a roof filming area, operable windows, and four internal rooms with divider walls and windows. The press box must be of all-welded steel frame construction with 26-gauge steel siding in a choice of standard manufacturer's colors. Specific requirements are provided for the floor, walls, roof, doors, windows, work benches, and electrical systems. The press box is warranted to be free from defects in materials and workmanship for one year.
This opportunity is part of a larger contract for stadium bleachers in Gladwin County, Michigan. No further details are provided about the overall contract, such as pricing terms, set asides, incumbents, funding sources, or award dates.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Base Bid Design.pdf | ||
| Coaches Pressbox.pdf | ||
| GLADWIN HIGH SCHOOL ALTERNATE BLEACHER SPECIFICATIONS.docx | DOCX document | |
| Gladwin HS - PRESS BOX spec (1).docx | DOCX document | |
| Gladwin HS Bid Drawing 10-24-23.pdf | ||
| GLADWIN GRANDSTAND SPECIFICATIONS - 10-24-23.docx | DOCX document | |
| Main Press Box.pdf | ||
| Gladwin Press Box Drawing.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SECTION 13126
REDFORD UNION HIGH SCHOOL
METAL STRUCTURE PRESS BOX SPECIFICATIONS
| 2.03 | PRESS BOX WITH METAL STRUCTURE | |
| NOTE: Bidder must provide proof of State of Michigan Approval to manufacture Press Boxes for projects within the State to be qualified to bid. |
| A. | Product Description: Type II Construction |
| 1. | Press Box Support Structure: Independently supported but connected to rear of grandstand. Support Structure to be 16 feet wide x 60’ feet long |
2. Press Box Dimensions: 10 feet wide x 54 feet long.
3. Provide Landings to either side of press box and rear walkway for access to Individual interior rooms.
4. Provide roof filming area with perimeter rails and fence with exterior access stairs off of rear platform.
5. Press Box to be of open construction, allowing inspection of electrical wiring, switches and other components without destructive disassembly.
· Four internal rooms as drawn (divider walls to have windows at the front to allow downfield viewing).
6. All Welded Steel Frame Construction with steel doors/frames.
7. Provide 26 ga Steel R-Panel Siding. Choice of standard manufacturers colors
8. Provide operable windows to the rear of the press box for ventilation
9. Interlocking anodized aluminum counters – must be a smooth writing surface
10. Sloped front windows as shown
11. Four Berco electric PTAC units as shown
| B. | Materials/Finishes |
| 1. | Press Box Support Structure: |
| a. | Structural shapes meet one of the following ASTM specifications: A36, A36/A572 grade 50, A572 grade 50, A529-50, or A500 grade B. |
b. Shop connections are seal welds.
c. After fabrication, all steel is hot-dipped galvanized to ASTM-A-123 specifications.
| 2. | Press Box: All materials shall be new and shall comply with ASTM specifications. |
| a. | Floor |
| (1) | Main support to be a galvanized steel floor frame sized to support structure and metal belly pan for support of insulation. |
| (2) | Floor to be INTERLOCK Aluminum Decking System, extruded aluminum alloy 6063-T6, mill finish. Attach Decking System to steel floor frame with mechanical fasteners at end of plank and at intermediate supports. (Tongue & Groove or Standard extrusion is not acceptable.) Vinyl tile from manufacturer’s standard selection. |
| (3) | Insulation: Kraft faced fiberglass building insulation R-11, 3 1/2 inches thick. Batt or roll as manufactured by Owens-Corning Fiberglass Corp., or equal. |
| b. | Wall Structure |
| (1) | 4 inch x 4 inch x 11 gauge square tubing with maximum span of 14 feet on front wall and maximum span of 6 feet on back wall and 4 inch x 2 1/2 inch x 14 gauge steel "cees" with maximum spacing of 5 feet for all walls with siding. Spans greater than these require engineered calculations for design. |
(2) Insulation: Kraft faced fiberglass building insulation R-11, 3 1/2 inches thick. Batt or roll as manufactured by Owens-Corning Fiberglass Corp., or equal.
| (3) | Interior Finish |
| (a) | 1/2 inch vinyl coated gypsum panels, Gold Bond vinyl-surfaced Durasan- Harvest Cotton. |
(b) Cove Base: Vinyl 4 inches x .080 equal to PRO CB-35 Nubian.
| (4) | Exterior Finish |
| (a) | 26 gauge pre-finished R-Panel paneling as manufactured by MBCI, Signature 200 color series, or equal. |
| (b) | Wall panels are attached with #12 TEK screws - 6” O.C. at the top and bottom of the panels. |
(c) Lap screws are placed at each end of the panels, at the intermediate supports, and at the mid point between supports (TEK #14).
(d) All fasteners to be painted same color as exterior paneling.
| c. | Roof Structure |
| (1) | 4 inch x 4 inch x 11 gauge square tubing with maximum spacing of 6 feet on center and 4 inches x 2 1/2 inches x 14 gauge steel "cees" with maximum spacing of 2 feet on center. |
| (2) | Roof: 1/8 inch four way steel plate roof, continuous welded seams coated with acrylic metal primer as manufactured by Coronado and 36 mils of acrylic roof coating as manufactured by Isothermal Protective Coatings, or equal. Plate is welded on both sides of rafters with 1-1/2 inch long 1/8 inch fillet welds on 12 inch centers. |
| (3) | Insulation: Kraft faced fiberglass building insulation, R-19 (minimum) 6 inches thick. Batt or roll as manufactured by Owens-Corning Fiberglas Corp., or equal. |
| (4) | Cornice: 26 gauge steel pre-finished to match metal siding. |
| (5) | Ceiling: 24 inch x 24 inch x 5/8 inch acoustical ceiling tile (model #- USG Fissured 560) with USG grid main tee (model # DXL24), cross tee (model # DXL 216), wall angle (model # M7), wind clips and other components as manufactured by USG, or equal. |
| d. | Exterior Door(s) |
| (1) | Full flush steel construction with honeycomb core. 18 gauge skin sheets. Dimensions: 3 feet 0 inches x 6 feet 8 inches. Color: White. |
| (2) | Steel door frame (16 gauge) complete with 1/2 inch threshold and weather-stripping. |
(3) Exterior Hardware: Yale 546F Exterior Trim, or equal. Handles shall be lever type that allow operation without tight grasping or twisting of the wrist. Keyed alike locks.
(4) Interior Hardware: Yale 2100 Exit Device, or equal. Handle shall be panic bar that allows for opening without any grasping, twisting or turning.
e. Interior Walls as shown
(1) Framing to be steel galvanized studs (25 gauge) 1 1/4 inch x 3 5/8 inch at maximum 2 feet on center.
(2) Finishes to be consistent with all other interior finishes.
(3) Provide fixed windows at front counter of each wall (see drawing)
f. Windows
(1) Frame: Extruded aluminum single hung, vertical sliding unit, thermal break. Sloped windows per drawings.
(2) Sash: Tilt toward inside for easy cleaning.
| (3) | Glazing: Clear tempered panes. | ||
| (4) | Dimensions of each unit: Dependent on compartment size. At interior wall locations or structural support locations the dimension between windows shall be no greater than 6 inches. | ||
| (5) | Finish: Electrostatically applied acrylic enamel. |
| g. | Work Bench |
| (1) | 18 inch wide work bench constructed of 4 inch x 2 1/2 inch x 14 gauge steel with interlocking anodized aluminum surface. Countertops heights shall be constructed to allow wheelchair usage at all locations. |
h. Roof camera deck with perimeter rails, Black vinyl clad chain link fence. Exterior access stairs
| i. | Painting: Materials equal to. Coronado, or equal. |
| (1) | Surfaces: Exterior Door(s), Door Frame(s) |
| (a) | Primer: Applied by Door Manufacturer. |
| (b) | Finish: 2 coats acrylic latex semi-gloss enamel applied by press box manufacturer. |
| (2) | Surfaces: Interior Doors (if applicable) |
| (a) | Primer: Jones Blair Interior Exterior Oil Primer, or equal. |
| (b) | Finish: 2 coats acrylic latex semi-gloss enamel. |
| (3) | Surfaces: Exterior Siding |
| (a) | Primer: Applied by Siding Manufacturer. |
| (b) | Finish: Applied by Siding Manufacturer. |
| (c) | Touchup: If applicable |
| (4) | Surfaces: Wall and Roof Structure |
(a) Primer: Coronado DTM Industrial 180-11 acrylic metal primer applied after welding, or equal.
j. Caulking: Sonneborn NP1 – Polyurethane sealant, All temperature, UV resistant, or equal. Silicone products are not acceptable.
j. Electrical:
Provide for all electrical as detailed in architects drawings as shown.
Includes 150 AMP service panel
2.04 WARRANTY
A. The Press Box is warranted to be free from defect in materials and workmanship in the course of manufacture for one year. This warranty excludes any other defects resulting from abnormal use in service, accidental or intentional damage or any occurrences beyond manufacturer's control.
Specs: PBX Metal Structure (3/01)
File details come from the government source that posted it. Updated .