FY24 Corrosion Control PWS (Base plus 2 Option Years).pdf
PDF 105 KB Posted
- Attached to
- Corrosion Control
- Solicitation number
- F9E2MX4058AW01
About this file
The provided document is a Performance Work Statement (PWS) for a federal contract opportunity related to corrosion control services for Aircraft Ground Equipment (AGE). The key details are:
The contractor shall provide all equipment, tools, materials, supervision, and services necessary to complete corrosion control on various AGE items, including generators, heaters, stands, carts, and fuel bowsers. The work involves paint removal, cleaning, corrosion treatment, priming, and topcoating in accordance with specified technical orders. The period of performance is 12 months with two 12-month option periods. The contractor will supply the primer and topcoat materials, and the government will provide the technical orders. Pickup and delivery hours are Monday-Friday, 0730-1530, excluding federal holidays. Contractor is responsible for proper disposal of any hazardous waste generated and securing the equipment while in their care. The related federal contract opportunity is a small business set-aside solicitation for corrosion control services on the AGE, with a single firm-fixed price award estimated in September 2024.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| T.O. 35-1-3.PDF | ||
| Wage Determination 2015-4157 as of 22 Jul 2024.pdf | ||
| Provisions and Clauses (SVS).pdf | ||
| T.O. 1-1-691.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE WORK STATEMENT
SUPPORT EQUIPMENT SURFACE PREPARATION
PAINT REMOVAL
CLEANING
CORROSION REMOVAL
PRIME AND TOPCOAT
106th Rescue WING
150 Old Riverhead ROAD
West Hampton Beach, NY 11978
LOCATED ON
Gabreski Airport ANGB
February 28th 2024
1. SCOPE OF WORK
The contractor shall provide all equipment, tools, materials, supervision, and services necessary to complete the work as described in this Performance Work Statement (PWS). Work location is at the vendor’s place of business. Transportation will be provided by the awarded contractor. All equipment will be de-painted, cleaned, corrosion will be treated, unit will be primed and repainted.
2. AREA OF WORK
Contractor shall work only on areas of the equipment as described in this statement of work.
3. DESCRIPTION OF WORK
Repainting must be accomplished by a certified auto body repair facility. The following Aerospace Ground Equipment has to be repainted: Three A/M32A-95 Generators, two NGH Heaters, one B-7 Stand, three Hydraulic Fill Bleed Carts, two Universal Hydraulic Test Stands, two 400 Gallon Fuel Bowsers and four FL-1D Lightcarts. Upon receipt of equipment the contractor will remove reflector tape and markings. Proper coating, cleaning, surface preparation, preservation, pretreatment, and painting requirements will be complied with IAW technical order 35-1-3, 1-1-691, and 1-1-8. Customer will supply these technical orders in PDF.
Format. Equipment will be sandblasted (where needed) or sanded and prepared by the contractor. Each unit will have corrosion treated and original surface contour restored IAW T.O.
1-1-691 and 35- 1-3. Undercarriage will be repainted. All access doors will be painted inside and out. Contractor will remove and reinstall wheel/tire assemblies and other minor components as required to effectively remove/treat corrosion and failed coatings. Existing control panel color scheme mustbe retained. Mask instruments, machined surfaces, engines, alternator, and electrical components to protect from overspray. A primer of MIL-P-2337J will be applied to a thickness of2mil. A topcoat , color number 26173, gray polyurethane, will be applied to a 3-5 mil thickness. Both primer and topcoat will be applied to entire exterior of unit including wheels.
Finish will beclear of all blemishes, overspray, and runs.
Contractor will report timeline status updates for each unit painted to the quality control evaluator. In the event rework is required, the contractor shall rework at no cost to the government. A customer point of contact will monitor contractor performance.
4. PERIOD OF PERFORMANCE
Contractor shall complete all work within a twelve month period of time. There will be two (2) option year periods for twelve (12) months each.
5. MATERIALS
Vendor will supply primer MIL-P2337J (yellow pigmented resin base and topcoat MIL-PRF-85285C, Type 1 (gray polyurethane). Vendor will supply parts, supplies, materials, personnel to complete paint removal, corrosion removal, priming and painting job. Contractor will sign Air Force Form 1297 acknowledging receipt of materials. Unused paint and primer will be returned to the 106th MXS.
6. GOVERNMENT WORKING HOURS
Pick-up and delivery hours will be Monday through Friday 0730 -1530 based on Available personnel, with the exception of scheduled off federal holidays.
7. DISPOSAL OF MATERIALS AND CLEANUP
Contractor is responsible to properly dispose of any hazardous waste generated performing contract duties.
8. SECURITY
Contractor will be responsible for equipment and contents while in their care and custody to include theft, vandalism, or any other damage. An Air Force Form 1297 will be signed by the contractor for each individual unit delivered for service. AF FORM 1297 will be relinquished when the unit specified on the receipt is returned
9. POINT OF CONTACT
106th Contracting Office 631-723-7562.
| 1. SCOPE OF WORK |
| 2. AREA OF WORK |
| 3. DESCRIPTION OF WORK |
| 4. PERIOD OF PERFORMANCE |
| 5. MATERIALS |
| 6. GOVERNMENT WORKING HOURS |
| 7. DISPOSAL OF MATERIALS AND CLEANUP |
| 8. SECURITY |
| 9. POINT OF CONTACT |
File details come from the government source that posted it. Updated .