FSA25-VEF19.0_-_Fire_Rescue_Item_Group_Specifications_1.pdf

Florida Sheriffs Association Cooperative Purchasing Program FSA Base Specifications

FSA25-VEF19.0: Fire & Rescue Vehicles, Boats & Equipment

Item Groups Summary Airport Rescue Fire Fighting Apparatus (ARFF) Fire Apparatus - Initial Attack Mid Mounted Aerial Apparatus Mid Mounted Aerial Platform Mobile Water Supply Fire Apparatus - Single or Dual Axle Pumper - Commercial 2-Door Pumper - Electric (EV) Pumper - Level 1 Custom 4-Door Chassis Pumper - Level 2 Custom 4-Door Chassis Rear Mounted Aerial Apparatus Rear Mounted Aerial Platform Rescue Apparatus - Heavy Rescue Apparatus - Medium Rescue Apparatus - Walk-In Tractor-Drawn Aerial Apparatus Wildland Fire Apparatus 4x4 Battery Powered Rescue Tools Emergency Transport Utility Vehicles Enclosed Breathing Air Compressor - Vertical, Electric Motor Fire Rescue, EMS, and Patrol Boats Outboard Engines Personal Watercraft (PWC) Stationary Containment Fill Station (SCFS) Ambulance Item Group Requirements Type I Ambulance: 4x2 Wheel Drive (4x4 Option), Regular Cab, Diesel Engine (Gas Engine Option) Type I Ambulance: 4x2 Wheel Drive (4x4 Option), Medium Duty Regular Cab, Diesel Engine (Gas Engine Option) Type II Ambulance: 4x2 Wheel Drive, Van, Gas or Diesel Engine Type III Ambulance: 4x2 Wheel Drive, Cutaway Van, Gas or Diesel Engine High Water Rescue Vehicle - Amphibious High Water Rescue Vehicle - Non-Amphibious High Water Rescue Vehicle - UTV Mobile Command Unit

Item Groups Summary All bid items shall be built to manufacturer base specifications for the item or model number indicated and shall include all standard manufacturer equipment unless otherwise specified. All items factory installed unless otherwise indicated.

Fire Apparatus

• Airport Rescue Fire Fighting Apparatus (ARFF)

• Fire Apparatus - Initial Attack

• Mid Mounted Aerial Apparatus

• Mid Mounted Aerial Platform

• Mobile Water Supply Fire Apparatus - Single or Dual Axle

• Pumper - Commercial 2-Door

• Pumper - Electric (EV)

• Pumper - Level 1 Custom 4-Door Chassis

• Pumper - Level 2 Custom 4-Door Chassis

• Rear Mounted Aerial Apparatus

• Rear Mounted Aerial Platform

• Rescue Apparatus - Heavy

• Rescue Apparatus - Medium

• Rescue Apparatus - Walk-In

• Tractor-Drawn Aerial Apparatus

• Wildland Fire Apparatus

Fire & Rescue Equipment

• Battery Powered Rescue Tools

• Emergency Transport Utility Vehicles

• Enclosed Breathing Air Compressor - Vertical, Electric Motor*

• Fire Rescue, EMS, and Patrol Boats

• Outboard Engines

• Personal Watercraft

• Stationary Containment Fill Station (SCFS)*

Ambulance Vehicles

• Type I Ambulance: 4x2 Wheel Drive (4x4 Option), Regular Cab, Diesel Engine (Gas Engine Option)

• Type I Ambulance: 4x2 Wheel Drive (4x4 Option), Medium Duty, Diesel Engine (Gas Engine Option)

• Type II Ambulance: 4x2 Wheel Drive, Van, Gas or Diesel Engine

• Type III Ambulance: 4x2 Wheel Drive, Cutaway Van, Gas or Diesel Engine

Other Vehicles

• High Water Rescue Vehicle - Amphibious*

• High Water Rescue Vehicle - Non-amphibious*

• High Water Rescue Vehicle – UTV*

• Mobile Command Unit

*Indicates that this is a new item group for FSA25-VEF19.0

Airport Rescue Fire Fighting Apparatus (ARFF) In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable).

USDOT/FAA procurement specification AC 150/5220-10E. When requested by the purchaser, Vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient GVWR to safely accommodate all options selected by the purchaser.

Bidders to bid Classes of ARFF that they produce.

Documentation

• Approval drawings provided prior to construction commencement

Power Train

• Engine certified by manufacturer for the application

• Transmission certified by manufacturer for the application

Fire Pump & Plumbing

• Centrifugal pump

Body

• Shall be corrosion resistant

• Minimum of 10 cubic feet of enclosed storage space

Water Tank

• AFFF Sized based on AC 150/5220-10E

Emergency Warning

• Fully compliant with AC 150/5210-5

• Electronic 100-watt siren with 100-watt siren speaker, minimum

• All emergency warning lights, rear, stop/turn/back-up lights, DOT clearance, pump panel, compartment, step, license plate, perimeter scene and interior dome lights to be LED

Paint Finish/Reflective Striping

• Paint as required by 150/5220-10E

• Striping as required by 150/5220-10E

Warranty

• One (1) year manufacturer’s warranty on all installed components, excluding normal wear and tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Five (5) year corrosion perforation on cab and body

• Lifetime frame warranty

• Two (2) year axle

• Five (5) year engine

• Five (5) year fire pump warranty

• Lifetime booster tank warranty

Fire Apparatus - Initial Attack In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

• Approval drawings to be provided prior to construction commencement

Chassis

• Chassis must be current model available at time of build. Chassis model year must be disclosed at time of purchase.

• Cab to axle – 60 inches or more

• Gross vehicle weight rating (GVWR) – 19,500 lbs.

• Heavy service suspension

• Power steering

• Tires – all season

• Alternator(s) meeting 12-volt system requirements

• Battery system to meet 12-volt system requirements

• Fuel tank, largest available

• Front tow hooks

• Turbo diesel engine

• Automatic transmission

• Limited slip differential, if available as standard equipment

Cab

• 2-door seating for a minimum of (2) passengers; crew-cab seating for a minimum of four (4) passengers; vinyl split-bench seat

• Single tone cab paint finish

• Air conditioning and heating

• Power mirrors with separate flat and convex sections – extended trailer towing mirrors

• Slip resistant running boards

• Minimum 500 gallons per minute (GPM) water pump with in-cab interlocked pump shift for pump engagement

• Primer

• Three (3) 2.5-inch discharge

• Maximum sized polypropylene booster tank allowable

Body

• Bidders to state thickness, alloys and construction methods of all materials used in body construction

• Minimum of four (4) body compartments. Compartments to be configured per customer request.

• Tailboard and/or stirrup type step for climbing from ground to rear of truck – bidders to state exact design

• No wood used in mounting

• Electronic 100-watt siren with 100-watt siren speaker, minimum

• All emergency warning lights, rear, stop, turn, back-up lights, DOT clearance, pump panel,

• Cab finish and body to be painted matching color

• Single tone cab paint finish tear items

• Five (5) year engine

• Five (5) transmission

• OEM chassis manufacturer’s standard warranty

• Lifetime booster tank warranty

• Five (5) year fire pump warranty

• Cab & chassis standard manufacturer paint warranty

• Ten (10) year pro-rated paint warranty on body

• Five (5) year corrosion perforation on body

Mid Mounted Aerial Apparatus In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). Aerial manufacturers (i.e., companies that manufacture the entire aerial device) must maintain a Quality Control Program. When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

• 110,000 psi steel frame rail with full length inner 110,000 psi C-channel liner

• 6-inch minimum extended front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 5,000 cubic inch air reservoir capacity

• Air dryer, turn drain valves on reservoirs

• Power steering with tilt, telescopic wheel

Powertrain

• Minimum 450 horsepower emergency vehicle service rated turbocharged diesel engine

• Secondary engine braking

• Emergency vehicle service rated automatic transmission

• Medium length tilt aluminum cab

• Seating for four (4), three (3) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab tilt with manual back-up

• Single tone cab paint finish

• Air conditioning and heating

• Remote controlled mirrors, from driver’s position with separate flat and convex sections

• Dual air horns with dual in-cab controls

Aerial Apparatus

• Mid-mounted configuration

• Minimum two (2) section aerial

• Turntable with pedestal mounted controls

• Aerial rated load capacity not flowing water: 500 lbs. minimum in addition to equipment mounted at tip of ladder

• Aerial rated load capacity while flowing 1,000 gallons per minute (GPM) with monitor at the ladder tip: 500 lbs. minimum in addition to equipment mounted at tip of ladder

• Extend/retract, rotate and hydraulic or electric over hydraulic controls Hydraulic pressure gauge at turntable controls

• Illuminated Angle of Elevation Indicator

• Flowmeter on pump panel

• Fall protection provisions shall be provided

• Bidders to state type of stabilizers and overall stabilizers spread

• Lighted turntable area

• Minimum 1,000 gallons per minute (GPM) waterway system

• Controls at fly section and turntable control pedestal, with manual pinned waterway

• Minimum 3-inch waterway discharge with 3-inch valve

• Minimum 4-inch waterway inlet (non-gated)

• Waterway relief valve and minimum 1.5-inch drain

• Stabilizer controls and stabilizer to aerial controls

• Minimum 1,250 gallons per minute (GPM) pump

• Pump shall be capable of achieving rated aerial flow without exceeding design performance.

• Air or electric operated pump shift

• Intake pressure relief valve

• Master drain valve

• Electric dry type or air primer

• Two (2) 2-inch cross-lay hose beds over the pump compartment

• Two (2) 2.5-inch left side discharges

• Two (2) 2.5-inch right side discharges

• Stainless steel plumbing

• Minimum 300-gallon polypropylene booster tank

Body

• Bidders to state thicknesses, alloys and construction methods of all materials used in body construction

• Ladder storage for minimum 85 ft. ground ladders, ladders to be included

• Rear pike pole storage for minimum of six (6) pike poles fully enclosed

• Hose bed with hose restraints

• Rub rail along each side of body

• Running boards at each pump panel

• Electronic 100-watt siren/PA with minimum 100-watt speaker

• All emergency lights, stop, turn, back-up lights, DOT clearance, pump panel, compartment, step, license plate, perimeter scene, and interior dome lights to be LED

• Cab and body to be painted single tone (excludes stainless steel not painted) tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Ten (10) year plumbing

• Five (5) year corrosion perforation on cab and body

• Twenty (20) year aerial structural

• Lifetime frame warranty

• Two (2) year front axle

• Two (2) year rear axle

• Five (5) year engine

• Five (5) year transmission

• Five (5) year fire pump

Mid Mounted Aerial Platform In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). Aerial manufacturers (i.e., companies that manufacture the entire aerial device) must maintain a Quality Control Program. When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

• 110,000 psi steel frame rail with full length inner 110,000 psi C-channel liner

• 6-inch minimum extended front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 5,000 cubic inch air reservoir capacity

• Medium length tilt aluminum cab meeting

• Seating for four (4), three (3) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab tilt with manual back-up

• Single tone cab paint finish

• Air conditioning and heating

Aerial Platform

• Minimum three (3) section aerial

• Turntable with pedestal mounted controls

• Aerial rated load capacity not flowing water: 1,000 lbs. minimum in addition to equipment mounted in platform

• Aerial rated load capacity while flowing 1,000 gallons per minute (GPM): 500 lbs. minimum in addition to equipment mounted in platform

• Extend/retract, rotate and hydraulic or electric over hydraulic controls Hydraulic pressure gauge at turntable controls

• Illuminated Angle of Elevation Indicator

• Flowmeter to be mounted at pump panel or turntable pedestal

• Man-saver gate or similar fall protection provisions at top of pedestal.

• Bidders to state type of stabilizers and overall stabilizers spread

• Lighted turntable area

• Minimum 1,000 gallons per minute (GPM) waterway system with remote control nozzle

• Controls at platform and at turntable control pedestal

• Minimum 3-inch waterway discharge with 3-inch valve

• Minimum 4-inch waterway inlet (non-gated)

• Waterway relief valve and minimum 1.5-inch drain

• Stabilizer controls and stabilizer to aerial controls

• Platform shall have a minimum floor area of 14 square ft. and be provided with closed sides, 45-inch high all around

• The platform shall be completely enclosed along the floorboard to protect occupants

• Two (2) lightweight deck monitors installed

• Minimum 1,250 gallon per minute (GPM) pump.

• Pump shall be capable to achieve rated aerial flow without exceeding design performance.

• Air or electric operated pump shift

• Intake pressure relief valve

• Master drain valve

• Electric dry type or air primer

• Two (2) 2-inch cross-lay hose beds over the pump compartment

• Two (2) 2.5-inch left side discharges

Body

• Bidders to state thicknesses, alloys and construction methods of all materials used in body construction

• Ladder storage for minimum 85 ft. ground ladders, ladders to be included

• Rear pike pole storage for minimum of six (6) pike poles fully enclosed

• Hose bed with hose restraints

• One (1) year manufacturer’s warranty on all vehicle components, excluding normal wear and tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Ten (10) year plumbing

• Five (5) year corrosion perforation on cab and body

• Twenty (20) year aerial structural

• Lifetime frame warranty

• Two (2) year front axle

• Two (2) year rear axle

• Five (5) year engine

• Five (5) year transmission

Mobile Water Supply Fire Apparatus - Single or Dual Axle In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable).

The intent of the mobile water supply specification is for all bidders to bid a mobile water supply vehicle with as much side and rear compartmentation as possible; equipped with an apparatus body, hose-bed, and pump module that are separate of the water tank. The hose-bed shall be integral to the apparatus body. When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

• Approval of drawings provided prior to construction commencement disclosed at time of purchase.

• Two-wheel drive

• 110,000 psi heat treated steel frame with full length inner C-channel liner

• Front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes, as large as possible, with automatic slack adjusters

• Minimum 13.2 cubic feet per minute (cfm) gear driven air compressor

• Power steering with tilt, telescopic wheel, if available

• Minimum 330 horsepower emergency vehicle service rated turbocharged diesel engine

• Minimum seating for two (2)

• 12-volt switches and instruments

• Air conditioning and heating

• Single tone cab paint finish

• Driver remote controlled mirrors with separate flat and convex sections

• 110-volt battery charger receptacle near driver’s door

• Minimum 500 gallons per minute (GPM) midship mounted PTO pump

• Intake pressure relief valve

• Master drain valve

• Electric dry type or air primer

• Two (2) 2-inch cross-lay hose beds with 1.5-inch connection over the pump compartment

• One (1) 2.5-inch left side discharge

• One (1) 2.5-inch right side discharge

• Side mount pump panel (not in a compartment)

• Minimum 1,800-gallon polypropylene booster tank

• Rear tank dump valve with 3-way dump capability

Body

• Bidders to state thicknesses, alloys and construction methods of all materials used in body construction

• Hard suction rack for two (2) lengths 10 ft x 4-inch minimum of hard suction

• Minimum of two (2) body compartments.

• Minimum of two (2) adjustable shelves. Compartments and shelves to be configured per customer request.

• Hose bed with hose restraints including one (1) adjustable divider

• Rub rail along each side of body and rear of body

• Electronic 100-watt siren with 100-watt siren speaker minimum

• Cab OEM finish and body to be painted matching color tear items

• Ten (10) year body structural

• Ten (10) year paint pro-rated on body

• Ten (10) year plumbing

• Five (5) year corrosion perforation on body

• OEM Chassis manufacturer’s standard warranty

• OEM standard paint warranty

• Five (5) year fire pump warranty

• Five (5) year engine

• Five (5) year transmission

Pumper - Commercial 2-Door In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

disclosed at time of purchase.

• Two-wheel drive

• 110,000 psi heat treated steel frame rail system

• Front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 13.2 cubic feet per minute (cfm) gear driven air compressor

• Minimum seating for two (2)

• Console between seats for 12-volt switches

• Air conditioning and heating

• Single tone cab paint finish

• Driver remote controlled mirrors with separate flat and convex sections

• 110-volt receptacle near driver’s door with onboard battery charger compartment, step, license plate, perimeter scene, and interior dome lights to be LED construction

• Minimum of six (6) body compartments.

• Minimum of nine (9) total adjustable shelves. Compartments and shelves to be configured per customer request.

• Brackets for 24 ft. 2-section, 14 ft. roof, 10 ft. attic ladders and 2 pike poles, ladders to be included

• Hose bed with hose restraints including one (1) adjustable divider

• Rub rail along each side of body and rear of body

• No less than four (4) self-contained breathing apparatus (SCBA) Bottle Storage

• Minimum 1,250 gallons per minute (GPM) drive shaft driven split shaft pump

• One 3-inch deck gun discharge

• Four (4) 2.5-inch discharge outlets including one (1) rear 2.5-inch discharge

• Two 1.5-inch cross-lays/speedlays with 2-inch piping

• 750-gallon T-type tank, poly

Paint Finish/Reflective Striping

• Cab OEM finish and body to be painted matching color

Warranty

• One (1) year manufacturer’s warranty on all installed components, excluding normal wear and tear items

• Ten (10) year body structural

• Ten (10) year paint pro-rated

• Ten (10) year plumbing

• Five (5) year corrosion perforation on body

• OEM Chassis manufacturer’s standard warranty

• Five (5) year fire pump warranty

• Five (5) year engine warranty

• Five (5) year transmission warranty

Pumper - Electric (EV) In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), and National Highway Traffic Safety Administration (NHTSA) standards. When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient GVWR to safely accommodate all options selected by the purchaser.

Vender must submit the minimum power requirement needed for vehicles charging system.

Documentation

• Approval of drawings provided prior to construction commencement

Chassis

• Chassis must be current model available at time of build. Chassis model year must be disclosed at time of purchase.

• 110,000 psi heat treated steel frame rail system or equivalent that meets or exceeds NFPA standards

• Heavy duty 16-inch to 24-inch extended front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 4,200 cubic inch air reservoir capacity

• Primary drive shall be electric motor supplied power from onboard rechargeable EV batteries.

• Secondary drive/range extender shall activate when battery reaches a state of charge no lower than 15%

• Secondary braking

Vehicle Charging

• Daily use charger will need to be obtained from a third-party vendor. Awarded vendors must provide proper guidance for selection of charger to be used. Purchasers may consult the FSA24-PWR3.0 Electric Vehicle Charging contract for additional charging options.

• 1,250 gallons per minute (GPM) pump

• One (1) 3-inch deck gun discharge

• Four (4) 2.5-inch discharge outlets (includes one (1) rear 2-1/2-inch discharge)

• Two (2) 1.5-inch crosslays with 2-inch piping

• Side mount pump panel

• Manufacturer’s standard medium length tilt aluminum cab or equivalent meeting NFPA standards and seating requirements

• Seating for four (4), three (3) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab with manual back-up, if applicable

• Air conditioning and heating

• Electronic 100-watt siren, minimum; 100-watt siren speaker, minimum construction

• Minimum of six (6) body compartments

• Minimum of nine (9) adjustable shelves. Compartments and shelves to be configured per customer request.

• Brackets for 24 ft. 2-section, 14 ft. roof, 10 ft. attic ladders and 2 pike poles, ladders to be included

• Hose bed with hose restraints including one (1) adjustable divider

• Rub rail along each side of body and rear of body

• No less than four (4) self-contained breathing apparatus (SCBA) bottle storage compartments

• Minimum 500-gallon poly tank

Paint Finish/Reflective Striping

• Cab and body to be painted single tone (excludes stainless steel not painted)

Warranty

• One (1) year manufacturer’s warranty on all installed components, excluding normal wear and tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Ten (10) year plumbing

• Five (5) year corrosion perforation on cab and body

• Lifetime frame warranty

• Two (2) year axle

• Five (5) year engine

• Five (5) year fire pump warranty

• EV Battery (Batteries) five (5) years or 100,000 miles

Pumper - Level 1 Custom 4-Door Chassis In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

disclosed at time of purchase.

• 110,000 psi heat treated steel frame rail system

• 16-inch to 24-inch extended front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 4,200 cubic inch air reservoir capacity

• Minimum 350 horsepower emergency vehicle service rated turbocharged diesel engine

• Manufacturer’s standard medium length tilt aluminum cab.

• Seating for four (4), three (3) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab tilt with manual back-up

• Single tone cab paint finish

• Air conditioning and heating construction

• Minimum of six (6) body compartments.

• Minimum of nine (9) total adjustable shelves. Compartments and shelves to be configured per

• Brackets for 24 ft. 2-section, 14 ft. roof, 10 ft. attic ladders and 2 pike poles, ladders to be included

• Hose bed with hose restraints including one (1) adjustable divider

• Rub rail along each side of body and rear of body

• Minimum 1,250 gallons per minute (GPM) drive shaft pump

• One 3-inch deck gun discharge

• Four (4) 2.5-inch discharge outlets including one (1) rear 2.5-inch discharge

• Two (2) 1.5-inch cross-lays with 2-inch piping

• 750-gallon T-type tank, poly

• One (1) year manufacturer’s warranty on all installed components excluding normal wear and tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Ten (10) year plumbing

• Five (5) year corrosion perforation on cab and body

• Lifetime frame warranty

• Two (2) year axle

• Five (5) year engine

• Five (5) year transmission

• Five (5) year fire pump warranty

Pumper - Level 2 Custom 4-Door Chassis In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

disclosed at time of purchase.

• 110,000 psi steel frame rail system heat treated

• 16-inch to 24-inch extended front bumper

• 1.5-inch front jump line with enclosed compartment in center of front bumper to hold minimum 100 ft. of 1.75-inch DJ fire hose

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 5,000 cubic inch air reservoir capacity

• Air dryer, color coded air lines, turn drain valves on reservoirs

• Power steering with tilt/telescopic wheel

• Minimum 400 horsepower emergency vehicle service rated turbocharged diesel engine

• Automatic transmission emergency vehicle service rated

• Extended length tilt aluminum cab-minimum

• Seating for six (6), five (5) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab tilt with manual back-up

• Single tone cab paint finish

• Air conditioning and heating

• Remote controlled mirrors from driver’s position with separate flat and convex sections

• Bidders to state thicknesses, alloys and construction methods of all materials used in body construction

• Minimum of seven (7) body compartments.

• Minimum of thirteen (13) adjustable shelves. Compartments and shelves to be configured per customer request.

• Internal ladder storage compartment, to hold ground ladders and two (2) pike poles

• Hose bed with hose restraints including one (1) adjustable divider

• Minimum of six (6) self-contained breathing apparatus (SCBA) bottle storage compartments

• Rub rail along each side of body with reflective stripe in rub rail

• Running boards at each pump panel with a recessed hose well with hose restraint strap in the passenger side running board

• Minimum 1,500 gallons per minute (GPM)

• One (1) 3-inch deck gun discharge

• Four (4) 2.5-inch discharge outlets-includes one (1) rear 2.5-inch discharge

• Two (2) 1.5-inch cross-lays with 2-inch piping

• Stainless steel plumbing

• One (1) 4-inch LDH discharge, right side pump panel, hand wheel control with 4-inch discharge valve and piping

• 750-gallon rectangular tank polyethylene fill tower

• One (1) year manufacturer’s warranty on all installed components, excluding normal wear and tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Ten (10) year plumbing

• Five (5) year corrosion perforation on cab and body

• Lifetime frame

• Two (2) year axle

• Five (5) year engine

• Five (5) year transmission

Rear Mounted Aerial Apparatus Bidders may and are encouraged to bid multiple lengths as long as specifications are met to provide more flexibility and choices to meet purchaser needs.

In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). Aerial manufacturers (i.e., companies that manufacture the entire aerial device) must maintain a Quality Control Program. When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

Documentation

• Approval drawings provided prior to construction commencement

Chassis

• Chassis must be current model available at time of build. Chassis model year must be disclosed at time of purchase.

• 110,000 psi steel frame rail with full length inner 110,000 psi C-channel liner

• 16-inch to 24-inch extended front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 5,000 cubic inch air reservoir capacity

• Secondary braking system

• Seating for four (4), three (3) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab tilt with manual back-up

• Single tone cab paint finish

• Air conditioning and heating

• Rear-mounted configuration

• Minimum two (2) section aerial

• Turntable with pedestal mounted controls

• Aerial rated load capacity not flowing water: 500 lbs. minimum in addition to equipment mounted at tip of ladder

• Aerial rated load capacity while flowing 1,000 gallons per minute (GPM): 500 lbs. minimum in addition to equipment mounted at tip of ladder

• Extend/retract, rotate and hydraulic or electric over hydraulic controls

• Hydraulic pressure gauge at turntable controls

• Illuminated Angle of Elevation Indicator

• Flowmeter on turntable control pedestal

• Fall protection provisions shall be provided

• Bidders to state type of stabilizers and overall stabilizers spread

• Lighted turntable area

• Minimum 1,000 gallons per minute (GPM) waterway system with remote control nozzle

• Controls at fly section and at turntable control pedestal with movable manual pinned waterway

• Minimum 4-inch rear waterway inlet with pressure gauge

• Minimum 4-inch waterway discharge with 4-inch valve

• Minimum 1,250 gallons per minute (GPM) pump.

• Pump shall be capable to achieve rated aerial flow without exceeding design performance.

• Air or electric operated pump shift

• Intake pressure relief valve

• Master drain valve

• Electric dry type or air primer

• Two (2) 2-inch cross-lay hose beds over the pump compartment with 1.5-inch connections

• Two (2) 2.5-inch left side discharges

Body

• Bidders to state thicknesses, alloys and construction methods of all materials used in body construction

• Minimum of two (2) body compartments.

• Minimum of two (2) adjustable shelves. Compartments and shelves to be configured per customer request.

• Ladder storage for minimum 85 ft. Ground ladders fully enclosed, ladders to be included

• Rear pike pole storage for minimum of six (6) pike poles fully enclosed

• Hose bed with hose restraints

• Rub rail along each side of body

• No fewer than four (4) self-contained breathing apparatus (SCBA) bottle storage

• Electronic 100-watt siren/PA with minimum 100-watt speaker recessed in bumper and tear items

• Bidder shall provide copy of paint warranty on aerial

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Ten (10) year plumbing

• Five (5) year corrosion perforation on cab and body

• Twenty (20) year aerial structural

• Lifetime frame warranty

• Two (2) year axle

• Five (5) year engine

• Five (5) year transmission

Rear Mounted Aerial Platform Bidders may and are encouraged to bid multiple lengths as long as specifications are met to provide more flexibility and choices to meet purchaser needs.

In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). Aerial manufacturers (i.e., companies that manufacture the entire aerial device) must maintain a Quality Control Program. When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

Documentation

• Approval drawings provided prior to construction commencement

Chassis

• Chassis must be current model available at time of build. Chassis model year must be disclosed at time of purchase.

• 110,000 psi heat treated steel frame rail with full length inner 110,000 psi C-channel liner or integral torque box frame

• 16-inch to 24-inch extended front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 5,000 cubic inch air reservoir capacity

• Minimum 450 horsepower emergency service rated turbocharged diesel engine

• Seating for four (4), three (3) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab tilt with manual back-up

• Single tone cab paint finish

• Air conditioning and heating

• Rear-mounted configuration

• Minimum three (3) section aerial

• Turntable with pedestal mounted controls

• Single axle chassis: platform rated load capacity not flowing water: 750 lbs. plus equipment.

Dual axle chassis: platform rated load capacity not flowing water: 1,000 lbs. plus equipment.

• Platform rated load capacity while flowing 1,000 gallons per minute (GPM): 500 lbs. in addition to permanently affixed equipment

• Extend, retract, rotate and hydraulic or electric over hydraulic controls

• Hydraulic pressure gauge at turntable controls

• Illuminated Angle of Elevation Indicator

• Flowmeter on turntable control pedestal

• Fall protection provisions shall be provided

• Bidders to state type of stabilizers and overall stabilizers spread

• Lighted turntable area

• Minimum 1,000 gallons per minute (GPM) waterway system with remote control nozzle

• Controls in platform and at turntable control pedestal

• Minimum 4-inch rear waterway inlet with pressure gauge

• Minimum 4-inch waterway discharge with 4-inch valve

• Minimum 1,500 gallons per minute (GPM) pump.

• Pump shall be capable to achieve rated aerial flow without exceeding design performance.

• Air or electric operated pump shift

• Intake pressure relief valve

• Master drain valve

• Electric dry type or air primer

• Two (2) 2-inch cross-lay hose beds over the pump compartment with 1.5-inch connection

• Two (2) 2.5-inch left side discharges

Body

• Bidders to state thicknesses, alloys and construction methods of all materials used in body construction

• Minimum of two (2) body compartments.

• Minimum of eight (8) total adjustable shelves. Compartments and hose bed to be configured per customer request.

• Ladder storage for minimum 115 ft. ground ladders fully enclosed, ladders to be included.

• Rear pike pole storage for minimum of six (6) pike poles fully enclosed

• Hose bed with hose restraints

• Rub rail along each side of body

• Electronic 100-watt siren/PA with minimum 100-watt speaker

• One (1) year manufacturer’s warranty on all Installed components, excluding normal wear and tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Ten (10) year plumbing

• Five (5) year corrosion perforation on cab and body

• Twenty (20) year aerial structural

• Lifetime frame warranty

• Two (2) year axle

• Five (5) year engine

• Five (5) year transmission

Rescue Apparatus - Heavy In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

disclosed at time of purchase.

• 110,000 psi steel frame rail with full length inner 110,000 psi C-channel liner

• 16-inch to 24-inch extended front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes, as large as possible, with automatic slack adjusters

• Minimum 5,000 cubic inch air reservoir capacity

• Minimum 350 horsepower emergency vehicle service rated turbocharged diesel engine

• Seating for four (4), three (3) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab tilt with manual back-up

• Single tone cab paint finish

• Air conditioning and heating

• Minimum 14 ft. body length, outside body length, do not include rear step in 14 ft. body length calculation, non-walk-in type body

• Minimum of four (4) body compartments.

• Minimum of five (5) adjustable shelves and one (1) pull out tray. Compartments and shelves to be configured per customer request.

• Minimum 10-inch rear step for access for rear storage compartment(s) with handrails

• Electronic 100-watt siren with 100-watt siren speaker, minimum compartment, step, license plate, perimeter and interior dome lights to be LED and tear item

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Five (5) year corrosion perforation on cab and body

• Lifetime frame warranty

• Two (2) year axle

• Five (5) year engine

• Five (5) year transmission

• Two (2) year fire pump (if applicable)

• Lifetime booster tank warranty (if applicable)

Rescue Apparatus - Medium In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

disclosed at time of purchase

• 110,000 psi heat treated steel frame rail system

• Front bumper

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 13.2 cubic feet per minute (cfm) gear driven air compressor

• Seating for minimum of two (2) passengers

• Air conditioning and heating

• Single tone cab paint finish

• Driver remote controlled mirrors with separate flat and convex sections

• Alternator to meet the requirements of amp draw report.

• Minimum 9 ft. body length outside length, do not include rear step in 9 ft. calculation of body length; non-walk-in type

• Minimum of four (4) body compartments.

• Minimum of ten (10) adjustable shelves. Compartments and shelves to be configured per

• All emergency lights, rear, stop, turn, back-up lights, DOT clearance, pump panel,

• Cab finish and body to be painted matching color and tear items

• OEM chassis manufacturer’s standard warranty

• Ten (10) year paint pro-rated

• Five (5) year engine

• Five (5) year transmission

• Cab & Chassis standard manufacturer paint warranty

Rescue Apparatus - Walk-In In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel powered vehicles (where applicable). When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

Documentation

• Approval drawings provided prior to construction commencement

Chassis

• Chassis must be current model available at time of build. Chassis model year must be disclosed at time of purchase.

• 110,000 psi steel frame rail with full length inner 110,000 psi C-channel liner

• Tow hooks or eyes front and rear attached to the frame

• Air brake package

• Minimum 300 horsepower emergency vehicle service rated diesel engine

• Minimum EVS 3000 transmission or equivalent

• Seating for two (2)

• Air ride driver seat, all others fixed position

• Air conditioning and heating

• Remote controlled mirrors

• Minimum 15ft. body length, outside body length, do not include rear step in 15ft. body length calculation, walk-in type body

• Minimum of five (5) body compartments.

• Minimum of ten (10) adjustable shelves. Components and shelves to be configured per customer request.

Emergency Warning

• Electronic 100-watt siren with 100-watt siren speaker, minimum

• All emergency warning lights, rear, stop, turn, back-up lights, DOT clearance, compartment, step, license plate, perimeter and interior dome lights to be LED

• One (1) year manufacturer’s warranty on all installed components, excluding normal wear and tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated on body

• Five (5) year corrosion perforation on cab and body

• Lifetime frame warranty

• Manufacturer’s standard warranty for front and rear axles

• Five (5) year engine

• Five (5) year transmission

• Two (2) year fire pump (if applicable)

• Lifetime booster tank warranty (if applicable)

Tractor-Drawn Aerial Apparatus In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). Aerial manufacturers (i.e., companies that manufacture the entire aerial device) must maintain a Quality Control Program. When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

Documentation

• Approval drawings provided prior to construction commencement

Chassis

• Chassis must be current model available at time of build. Chassis model year must be disclosed at time of purchase

• 110,000 psi steel frame rail with full length inner 110,000 psi C-channel liner or integral torque box frame

• Tow hooks or eyes front and rear attached to the frame

• Front and rear mud flaps

• S-cam air brakes or equivalent, as large as possible, with automatic slack adjusters

• Minimum 5,000 cubic inch air reservoir capacity

• Seating for four (4), three (3) in self-contained breathing apparatus (SCBA) seats with SCBA brackets

• Air ride driver seat, all others fixed position

• Electric over hydraulic cab tilt with manual back-up

• Single tone cab paint finish

• Air conditioning and heating

• Four (4) section aerial with minimum elevation of 100 ft.

• Turntable with pedestal mounted controls

• Aerial rated load capacity not flowing water: 500 lbs. minimum in addition to equipment mounted at tip of ladder

• Aerial rated load capacity while flowing 1,000 gallons per minute (GPM): 500 lbs. minimum in addition to equipment mounted at tip of ladder

• Extend/retract, rotate and hydraulic or electric over hydraulic controls

• Hydraulic pressure gauge at turntable controls

• Illuminated Angle of Elevation Indicator

• Flowmeter on turntable control pedestal

• Fall protection provisions shall be provided

• Bidders to state type of stabilizers and overall stabilizers spread

• Lighted turntable area

• Minimum 1,000 gallons per minute (GPM) waterway system with remote control nozzle

• Controls at fly section and at turntable control pedestal with movable manual pinned waterway

• Minimum 4-inch rear waterway inlet with pressure gauge

• Minimum 4-inch waterway discharge with 4-inch valve

Tiller

• Tiller cab to be totally enclosed

• Tiller cab to have one (1) fixed suspension seat

• Tiller cab to have minimum 6-inch round convex mirror, one on each side

• Gooseneck area of tiller trailer to be constructed of 100,000 psi minimum yield strength steel

• Trailer frame rails to be constructed of 80,000 psi minimum yield strength steel

• Tiller trailer axle to be minimum of 22,800 lbs.

construction

• Minimum two (2) body compartments.

• Minimum ten (10) adjustable shelves and two (2) pull-out trays. Compartments and shelves to be configured per customer request.

• Ladder storage for minimum 115 ft. ground ladders, fully enclosed, ladders to be included

• Rear pike pole storage for minimum of six (6) pike poles, fully enclosed

• All emergency lights, stop, turn, back-up lights, DOT clearance, compartment, step, license plate, perimeter scene, and interior dome lights to be LED

Paint Finish/Reflective striping and tear items

• Ten (10) year cab and body structural

• Ten (10) year paint pro-rated

• Five (5) year corrosion perforation on cab and body

• Twenty (20) year aerial structural

• Lifetime frame warranty

• Two (2) year all axles

• Five (5) year engine

• Five (5) year transmission

• Five (5) year fire pump, if applicable

• Lifetime booster tank warranty, if applicable

Wildland Fire Apparatus 4x4 In all areas of this specification, bidders must comply with current National Fire Protection Association (NFPA) standards, Federal Motor Vehicle Safety Standards (FMVSS, where applicable), National Highway Traffic Safety Administration (NHTSA) standards, and United States Environmental Protection Agency (EPA) emission standards for gasoline and diesel-powered vehicles (where applicable). When requested by the purchaser, vendors must submit detailed specifications for the item and options offered. Vendors are responsible for providing a chassis of sufficient gross vehicle weight rating (GVWR) to safely accommodate all options selected by the purchaser.

Documentation

• Approval drawings provided prior to construction…