Fire Ring Installation Details.pdf
PDF 259 KB Posted
- Attached to
- Fire Ring Custodian Service at Rathbun Lake
- Solicitation number
- W912DQ21R1019
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B.01.01 Combined Synopsis and Solicitation3.pdf | ||
| OFR-A FY21 Fire Ring Location Maps.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Fire Ring Installation Details
Typical Fire Ring with Grill Screw-in Earth Anchor Tools Required
1. Drill or bar to screw in anchors.
2. Torch to heat rod
3. Pipe to make bend.
Top View Installation Detail
1. Install two (2) screw-in earth anchors between tabs located on the back of the fire ring.
2. Insert steel rod through the tabs on the fire ring and through the eyes of the screw-in anchors.
3. Bend each end of the rod at 90 decrees so the rod cannot be removed.
Screw-in Anchor
Tab on Fire Ring
Rod
Screw-in Anchor
Tab on Fire Ring
Rod
Ground Surface
Rear View Installation Detail
| Fire Ring Installation Details |
| Slide Number 2 |
| Top View Installation Detail |
| Slide Number 4 |
File details come from the government source that posted it. Updated .