Fire Command Trucks_WCF Fleet Upfitting of RLS - 8 New Trucks_Specifications.docx

Fire Command Vehicles (8) – Red Lights-Siren (RLS) & Striping Package Specifications

· = Forest Service (FS) Equipment Numbers, Type Truck – VIN

· = Command Vehicle Nomenclature, light bar width, type mobile radio supplied by FS

· 4182, 2024 Ford F350 Supercab, 1FT8X3BA6REE70846

· CO-PSF PT9, 54” lightbar, BK M150 Remote

· 4277, 2024 Ford Ranger Crew Cab, 1FTER4HH1RLE27390

· CO-PSF BC11, 48” lightbar, BK M150 Remote

· 4278, 2024 Ford F250 Supercab, 1FT7X2BA2REE31645

· CO-PSF BC2, 54” lightbar, BK M150 Remote

· 4279, 2024 Ford F250 Supercab, 1FT7X2BA8REE31939

· CO-PSF DV9-1, 54” lightbar, BK M150 Remote

· 4280, 2024 Ford F250 Supercab, 1FT7X2BA2REE33332

· CO-PSF BC10, 54” lightbar, BK M150 Remote

· 4281, 2024 Ford F350 Supercab, 1FT8X3BA7REE70841

· CO-PSF DV9, 54” lightbar, BK M150 Remote

· 4286, 2024 Ford F350 Crew Cab, 1FT8W3BA8REE17178

· CO-PSF C19C, 54” lightbar, BK M150 Remote

· 4288, 2024 Ford F250 Crew Cab, 1FT7W2BA6REE34986

· CO-PSF UTL11, 54” lightbar, BK M150

The Forest Service will supply,

· BK mobile radios (8) type as identified above

· Console faceplates (8) for the BK radios

· Remote Speakers (8)

· Antenna kits (w/coax cables) (8)

Vendor to procure and install all RLS systems and striping/nomenclature kits.

· Vendor to be within 125 miles of Pueblo, CO 81008

Lighting:

· Light Bar 48” to 54” wide (vehicle dependent, see above for per vehicle requirement) L.E.D. low profile clear lens lightbar shall be installed on the cab roof, facing forward. Lightbar shall have 12 or more L.E.D. sections as needed per specifications. All Emergency lighting components must have a minimum 5-year factory warranty. The light bar shall be wired to the siren/lightbar switch controller located in the cab.

Forward Zone Light Bar LED’s:

Singled red L.E.D.’s and two center takedown white L.E.D ’s Side Zones Light Bar L.E.D.’s:

Right and left side center alley single white L.E.D.’s Two per side Right and left single red L.E.D. ‘s Rear Zone Light Bar L.E.D. ‘s:

Bi-color, red and amber L.E.D.’s

· Forward Warning Lights:

Two red L.E.D. warning lights, with mounting flanges, shall be provided on the front of the vehicle, forward facing, one per side. The lights shall be programmed in a red triple flash mode. The lights shall be wired to the siren/switch controller located in the cab.

· Front Fenders Side Warning Lights:

Two red L.E.D. warning lights, with mounting flanges, shall be provided on the front corners of the vehicle, side facing, one per side. The lights shall be programmed in a triple flash mode. (Low profile lights, not to exceed 1” protrusion from the mounting location). The lights shall be wired to the siren/switch controller located in the cab.

· Rearward Warning Lights:

Two red L.E.D. warning lights shall be provided at the rear tailgate of the vehicle, rear facing, one per side. The lights shall be programmed in a red triple flash mode. The lights shall be wired to the siren/switch controller located in the cab.

· Rear Bedsides Side Warning Lights:

Two red L.E.D. warning lights, with mounting flanges, shall be provided on the rear corners of the vehicle, side facing, one per side. The lights shall be programmed in a red triple flash mode. (Low profile lights, not to exceed 1” protrusion from the mounting location). The lights shall be wired to the siren/switch controller located in the cab.

· Siren Speaker w/PA System and Radio Rebroadcast:

One 100-watt siren speaker shall be provided and mounted in a forward under body location that is not obstructed or vulnerable to being impacted. The speaker shall be wired to the siren/switch controller.

· Siren/Lightbar/Lights Switch Controller: 9-switch lights controller (Minimum), siren controller, and P/A system:

Electronic siren, with switching and rear directional controller shall be provided and mounted in the cab center console in a location convenient to both the driver and anyone seated in the passenger seat.

The siren shall have four basic siren tones (manual, wail, yelp and hi-lo), as well as an electronic air horn, radio rebroadcast capability and a public address system.

The siren controller shall be powered from the Auxiliary fuse box with electronic timer installed.

· Lightbar and lower zone lights shall be programmed to the specifications of,

· Slide switch/code operation

· Position 0

· Off

· Position 1

· Rear facing red strobes on lightbar flashing red – on

· Rear corner facing red strobes on lightbar flashing red – on

· Lower zone rear facing and rear side red strobes – on

· Position 2

· Forward facing red strobes on lightbar flashing red – on

· Lower zone front facing and front side red strobes - on

· Rear facing red strobes on lightbar flashing red – on

· Rear corner facing red strobes on lightbar flashing red – on

· Lower zone rear facing and rear side strobes – on

· Position 3

· All red strobes on lightbar multi-pattern flashing red – on

· All red lower front, rear, and side zone strobes flashing – on

· Push button switches shall be labeled and operate lights as follows from left to right

· Left Alley

· Takedowns

· Right Alley

· Traffic advisor operation

· Left

· Center Out

· Right

**See below for the Ford Ranger handheld controller. Button programing to be determined with awarded contractor.

· Radio Console: Vehicle specific consoles for 8 of the trucks, per example picture, capable of housing all the identified components below, and a padded armrest with underside storage area.

· One BK model KNG-M150-D or M-150 Remote radio

· Emergency lighting and siren controller

· 4 12-volt power points to include USB 2/C charging ports on two of the ports

· 2 cup holders

** The Ford Ranger truck will require an RLS handheld control system per the example picture and will require the M150 remote mobile radio installed as per the example picture. (below)

· Remote Speaker:

Remote speaker will be mounted on the right side of the center console units and for the Ford Ranger remote speaker located in a location suited for its best reception.

· Antenna:

Will be roof top mounted and tuned to 144mhz to 174mhz.

· Manuals/Diagrams:

All owners’ manuals, wiring diagrams and warranty information for installed items shall be provided to the Government in either electronic (thumb drives) and/or hard copy notebook format.

· Striping, Designators & Nomenclature:

The front, rear, sides, and rooftop decals will be procured and installed by the awarded contractor, per the example pictures below. The 18” rooftop decals, with no picture below, will be installed in a position for their best location for aerial views after the overhead lightbar has been installed.

* The Forest Service will install the door shields with equipment number after the return of the trucks.

image6.jpeg image7.jpeg image8.jpeg image1.png image2.jpg image3.jpeg image4.jpeg image5.jpeg