Final SOW - large diameter schlieren mirror.pdf
PDF 97 KB Posted
- Attached to
- LARGE DIAMETER SCHLIEREN MIRROR Federal contract opportunity
- Solicitation number
- 1333ND23QNB640606
About this file
This statement of work outlines requirements for the procurement of a large diameter schlieren mirror for the National Institute of Standards and Technology. The mirror must have a diameter between 762mm and 1016mm, a radius of curvature of 4 meters and a focal length of 2 meters. The surface accuracy is specified as 1/4 and the scratch/dig measurement is 60/40. The mirror material and thickness are not specified but the coating must be AlSiO or other reflective coating. The contractor must provide a two-year warranty covering all parts, labor and travel, commencing upon government acceptance. Delivery of the conforming mirror is due 90 days from award of the contract. Acceptance criteria requires demonstration that all performance specifications are met upon delivery to NIST in Gaithersburg, Maryland.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Revised Final SOW - large diameter schlieren mirror.pdf | ||
| Provisions and Clauses Final.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF REQUIREMENTS
TITLE: Procurement of a large diameter schlieren mirror
I. SPECIFICATIONS
The contractor shall provide one (1) large diameter schlieren mirror that meets or exceeds the following specifications:
System Requirements:
• Mirror diameter greater or equal to 762 mm (30 inches.), up to 1016 mm (40 inches)
• Mirror radius of curvature = 4 meters
• Mirror focal length = 2 meters
• Surface accuracy = λ/4
• Scratch/dig = 60/40
• Mirror material is not specified.
• Mirror thickness is not specified.
• Mirror coating = AlSiO or other reflective coating
Warranty:
The Contractor shall provide, at a minimum, a two-year warranty for the equipment. The warranty shall cover all parts, labor, and travel. The warranty shall commence upon Government
Acceptance. If repairs are required and instrument is still under warranty, then the Contractor shall provide guidance on how to proceed with repairs.
II. DELIVERY
Delivery of the mirror shall be 90 days from award of this requirement.
III. PLACE OF PERFORMANCE
The mirror will be delivered to NIST Gaithersburg in Maryland
IV. DELIVERABLES
Description Quantity Due Date
Large diameter schlieren mirror One (1) 90 days after award of this requirement.
V. ACCEPTANCE CRITERIA
The Contractor shall demonstrate that all performance specifications are met.
VI. GENERAL INFORMATION
Safety: The Contractor employee shall be responsible for knowing and complying with commercial installation safety prevention regulations. Such regulations include, but are not limited to, general safety, fire prevention, and waste disposal.
Security: NIST is a restricted campus. An identification badge is required for access for entry into buildings and also is shown to the armed Security Police when entering the campus.
Identification Badges: Contractor employees shall comply with NIST identification and access requirements. The Contractor shall provide the name and citizenship information of employees for on-site visits to the Subject Matter Expert (SME) prior to arrival. The SME will submit the name(s) and citizenship information to the NIST Office of Security in order for a given
Contractor employee to enter the NIST campus. The Contractor employee is responsible for absences due to missing or expired identification and access documents. Each Contractor employee shall wear a visible identification badge provided by the NIST Security Office.
Vehicle Registration: All Contractor employees must register their vehicles with the NIST
Security Office to gain access to the campus. A valid driver’s license, Government-furnished civilian ID (which in most cases can be a valid driver's license), proof of insurance and current registration must be presented to the NIST Security Office.
File details come from the government source that posted it. Updated .