Final_RFQ_540_2000000135_1_SO_FORM.PDF

Document ID: RFQ 540 2000000135 Page: 1

Commonwealth of Kentucky

SOLICITATION

Addenda: No Addenda #:

TITLE: CNC Router 36X60in. flat capacity 10X60 spindle capacity

Date Issued:

4/3/20 Record Date:

2020-04-03

Solicitation Closes Date:

4/15/20 Time:

14:00

Solicitation No:

RFQ 540 2000000135

Online Bidding Prohibited: Yes

For Information Call:

Rose Caudle 502-564-1976

Bid Receiving Location:

Bid Receiving

See Terms & Conditions for Bid Submission Instructions

Other KY

Vendor Customer Number:

Vendor Name:

Phone Number:

Fax Number:

Email Address:

Ordering

Address:

City, State, Zip:

Contact Name:

Contact Email:

Contact Phone Number:

Payment

Address:

City, State, Zip:

Contact Name:

Contact Email:

Contact Phone Number:

Ownership Type

__ Sole Proprietorship __ Partnership __ Corporation __ Other_________________________

SIGNATURE OF AUTHORIZED AGENT IS REQUIRED UNLESS RESPONSE

IS SUBMITTED ELECTRONICALLY. FAILURE TO SIGN SHALL RENDER

THE BID INVALID.

Signature X_________________________________________ FEIN#____________________ Date____________

All offers subject to all terms and conditions contained in this solicitation.

Document ID: RFQ 540 2000000135 Page: 2

Line Items

Commodity Group: Default

Line CL Description Quantity UOM Unit Cost Line Total or Contract Amnt

1 60 36X 60 inch flat capacity 10 X 60 spindle capaci

1.00000 EA

Comm Code Comm Description Manufacturer Model # Manuf Part #

54590 Woodworking Machines and Tools (Not Otherwise Classified), P

Extended Description CNC machining Center - see specifications in terms and conditions below

Shipping Information KSD - Kentucky School for the Deaf

303 South Second St

Danville KY 40422

Billing Information KSD - Kentucky School for the Deaf

PO Box 27

Danville KY 40422

Document ID: RFQ 540 2000000135 Page: 3

Submission Checklist

The following items will be required to be submitted with bid:

Item Cost: 90 Points Delivery: 5 Points Warranty: 5 Points

Kentucky Department of Education 300 Sower Boulevard Frankfort, KY 40601

Informal Solicitation for Goods or Non-Professional Service

Please note: The Finance and Administration Cabinet Policy Procedure FAP 110-10-00: General Conditions and Instructions for Solicitations and Contracts is hereby incorporated by reference into this solicitation.

The Web site for entire Policies and Procedure manual: http://finance.ky.gov/services/policies/Pages/ default.aspx

Solicitation Instructions Due Date for Response 2:00 PM ET April 15, 2020

Due to Covid-19, mailed in responses cannot be received at this time. Responses to this Request for Quotation must be returned to the following email address: kderfp@education.ky.gov.

Identify the response using the RFQ number in the subject line of the email.

Terms and Conditions

Maverick 60 36X60 Workstation CNC Machining Center or approved equal brand / model for a classroom setting:

60 36 X 60 inch flat capacity 10 X 60 spindle capacity frame with smart tool attachment, Floor Stand, MiniX computer, Mach 3 Motion control software, Software install and calibration, CCAM Software, Joinery System, Factory training

Specs:

WORK AREA

X axis – 60” Y axis – 24” can be expanded to 36” Z axis – 9 “ B axis – 4 “

FRAME

Welded Steel frame 20 mm linear bearings and shafts X axis and Y axis rack and pinion drive Z axis precision ball screw drive A axis quiet timing belt drive B Axis Acme screw drive (manual adjust)

DRIVE SYSTEM

Powerful NEMA 34 stepper drives & motors

FEED RATES

X axis = 600 inches per minute Y axis = 600 inches per minute

Document Description Page 4

2000000135 CNC Router 36X60in. flat capacity 10X60 spindle capacity http://finance.ky.gov/services/policies/Pages/default.aspx http://finance.ky.gov/services/policies/Pages/default.aspx mailto:kderfp@education.ky.gov

Z axis – 180 inches per minute A axis – 300 RPM

SPINDLE

Max Rating

S.A.E. - 3.0 HP

Metric - 2.2 KW Speed Range @ Max Torque S.A.E. - 12000 – 24000 rpm Metric - 12000 – 24000 rpm Max Torque S.A.E. – 0.65 ft – lbf @ 12000 rpm Metric – 0.88 Nm @ 12000 rpm Tool Type ER420 Collet Chuck Cooling Liquid cooled Spindle Optimized for Wood Spindle Mount Adjustment Range S.A.E. – 0.0 in – 4.0 in Metric – 0.0 cm – 10.16 cm Spindle Body Diameter S.A.E. – 3.15 in Metric – 80 MM

TOOL CHANGER

Manual Tool Changer Type Dual Wrench ER20 Collet chuck Tool Capacity (+ continues w/ unlimited tools) 1+ Max Tool Diameter (full) S.A.E. – 3.0 in Metric – 7.6 cm

ROTARY CAPACITY

Max Cutting Diameter S.A.E. – 10.0 in Metric – 25.4 cm Max Cutting Length (varies with work holding) S.A.E. – 50 in Metric – 127 cm Spindle Collet to turning Center (Max Range) S.A.E. – 9.75 in – 13.75 in Metric – 25 cm – 35 cm Spindle Collet to turning Center (Min Range) S.A.E - .19 in – 4.19 in Metric .5 cm – 10.6 cm

ROTARY A AXIS

Document Description Page 5

2000000135 CNC Router 36X60in. flat capacity 10X60 spindle capacity

Positioning (+-)

0.1 degree Headstock Shaft S.A.E. – 1.0 in / 0.125 in pitch Metric – 25.4 mm / 3.175 mm pitch Tailstock Shaft S.A.E. – 1.0 in/ #2 mt Metric – 25.4 mm / #2 mt

ROTARY B AXIS CAPACITY (TAPER)

B Axis Angle (min – max) 0 – 3.8 degree

ROTARY B AXIS (TAPER)

Drive Method Manual Screw Handle Pivot Location Headstock Manual Adjustment Location Tailstock

3 AXIS HORIZONTAL TABLE CAPACITY

Base Table Work Area Length S.A.E. – 49 in Metric – 124.5 cm Base Table Work Area Width S.A.E – 24 in Metric – 61 cm Extendable Table Work Area Length S.A.E – 56 in Metric - 142 cm Extendable Table Work Area Width S.A.E. – 36.25 in Metric – 92 cm Between Columns S.A.E. – 42.5 in Metric – 108 cm Spindle Collet to Horizontal Base Table (Max Range) S.A.E. – 7.12 in – 11.12 in Metric – 18 cm – 28 cm Spindle Collet to Horizontal Base Table (Min Range) S.A.E. – (-)2.44 – 1.56 in Metric – (-) 6.2 cm – 4 cm

3 AXIS VERTICAL TABLE CAPACITY

Vertical Table Work Area Length (y axis) S.A.E. – 20 in Metric – 51 cm Vertical Table Work Area Width (x axis) S.A.E. – 7 in

Document Description Page 6

Metric – 17.8 cm Spindle Collet to Foot (max range) S.A.E. – 41.25 in – 37.25 in Metric – 104.8 cm – 94.6 cm Spindle Collet to Vertical Table (max range) S.A.E. – 7.75 in – 11.75 in Metric – 104.8 cm – 94.6 cm Spindle Collet to Vertical Table (min range) S.A.E. – (-) 1.81 in – 2.19 in Metric – (-) 4.6 cm – 5.6 cm

3 AXIS VERTICAL TABLE

Fixture Tapped Hole ¼ - 20 in Fixture Through Hole S.A.E. – 3/8 in Metric – 9.5 mm Fixture Tapped Hole Spacing S.A.E. – 2.0 in X 20. In Metric – 50.8 mm X 50.8 mm Fixture Through Hole Spacing S.A.E. – 2.0 in x 2.0 in Metric – 50.8 mm x 50.8 mm X,Z Table Angle (min – max) 0 – 90 degree Y,Z Fence Angle (min – max) 0 – 90 degree

MOBILITY KIT

Retractable Caster Assembly (4 per set) Fits ½ in hold pattern

VACUUM TABLE (OPTIONAL)

Vacuum Table Work Area Length S.A.E. – 49 in Metric - 124.5 cm Vacuum Table Work Area Width S.A.E. – 24 in Metric – 61 cm Vacuum CFM (4 ports) S.A.E. – 450 cfm total Metric – 765 cmh

DUST MANIFOLD REQUIREMENTS

Dusting Diameter S.A.E. – 4.0 in Metric – 10.16 cm CFM (min) S.A.E. – 1500 cfm Metric – 2549 cmh

Document Description Page 7

COOLANT REQUIREMENTS

Air Required 50/50 Green Antifreeze Coolant Capacity S.A.E. – 5 gal Metric – 19 L

LUBRICATION REQUIRMENTS

Z Ball Screw Lubrication White Lithium Grease X,Y,Z Bearing Rod Lubrication Dynaglide Plus Dry Lube

ELECTRICAL SPECIFICATION

Machine – Input AC Voltage (1Phase)

220 VAC

Machine – Full Load Amps (1Phase) 20 A Vacuum – Input AC Voltage (1Phase)

220 VAC

Vacuum – Full Load Amps (1Phase) 30A

INCLUDED WITH PURCHASE

T – Allen Wrench (small) 5/32 in T – Allen Wrench (large) 3/16 in Spindle Wrenches ER20 Collet Wrenches Collet (1 qty.)

½ in ER32 Collet Conversational CAM Software 1 License WiFi Antenna for Tech Support RP-SMA connection Turning Hub S.A.E. – 2.0 in Metric – 5.1 cm Smart Tool Mobile Pad 1 Touch Pad Spindle Manual 1 Manual Variable Frequency Drive Manual 1 Manual

Vendor Responsibilities Vendor shall supply all materials including but not limited to: Electric cords and small hardware needed to install.

Document Description Page 8

Vendor shall be responsible for hauling off any boxes or packaging used for shipping.

Best Value Scoring will be on the following criteria. Failure to fill in this information may result in a score of 0 for that category.:

Brand and model being quoted ___________________ if other than specified brand/model.

Vendors bidding a brand other than the one specified shall submit descriptive product literature for evaluation along with their quote. Failure to do so may result in the disqualification of the response.

Delivery is required on or before June 30, 2020. Funding requires the goods be received by June 30.

Delivery date: ___________________.

Warranty Equipment Minimum 3 year parts and labor

Vendor shall enter best materials, workmanship & installation warranty period: __________ MONTHS

Compressors Minimum 5 year warranty

Vendor shall enter best materials, workmanship & installation warranty period: __________ MONTHS

PRICING

Pricing shall include all materials, delivery and installation and to be broken down by Materials, Labor and Delivery and include a total costs.

Trade In Item Legacy Woodworking Arty 36 18 X 36 inch flat capacity 9 X 36 spindle capacity Inventory ID tag# ED0000200001099

Bosch 1617 evs Arty Floorstand Smart Tool ConCAM4.0

Pictures are included for trade in assessment. See separate attachment for pictures. Any vendor wishing to “see” the equipment must contact Rose Caudle at rose.caudle@education.ky.gov before 2:00 pm, Wednesday, April 8, 2020 to arrange for a Zoom, Skype, Facetime, or other electronic viewing of the equipment.

CNC Machine Cost $ __________________

- Trade-In Allowance $__________________

TOTAL COST, including shipping/delivery and trade in allowance

Document Description Page 9 mailto:rose.caudle@education.ky.gov

Total Cost $_______________________

DELIVERY LOCATION

Kentucky School for the Deaf Argo McClure

3303 South 2nd Street Danville KY 40422

Project Contact Jay Cloud

(859) 552-0344

DELIVERY/COMPLETION DATE

Delivery is required on or before June 30, 2020

EXCEPTIONS TO SPECIFICATIONS

Vendors are cautioned that changes made to the solicitation other than in the designated fields for response shall render the response invalid and result in a non-responsive bid. Otherwise, it will be considered that items/services offered are in strict compliance with these specifications, and the successful bidder shall be held responsible for delivering materials/services that meet these specifications. Any exceptions shall be marked as such within the body of the bid and explained on a separate page. The Commonwealth is not bound to accept any exceptions.

ALTERNATE BRANDS/SPECIFICATIONS

Unless otherwise specified, brands and specifications referenced in this solicitation are meant to establish a minimum standard of quality only. Bidders may bid brands/specifications they consider to be equal by specifying the brand(s)/specifications and inserting the brand name(s), model number(s), etc. on which they are bidding. Bids offering “equal” products/specifications will be considered for award if such products are clearly identified in the bid and are determined by the State to meet or exceed fully the minimum essential specifications and salient characteristics referenced in the Solicitation. Bids that contain products/ specifications that fail to meet the minimum essential requirements shall be deemed non-responsive.

Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid.

If the brands are not changed, the contract will be written accordingly and the successful bidder shall be required to deliver the brands/specifications stated in the solicitation.

RECYCLE REQUIREMENTS

Prospective bidders are required to comply with Recycle Requirements for the purchase of goods, supplies, equipment, materials and printing with a minimum recycled content to the extent practicable per 200 KAR 5:330. This regulation can be viewed on the Internet at <http://www.lrc.state.ky.us/kar/200/005/330.htm>.

INVOICING INSTRUCTIONS

The vendor is responsible to submit an invoice to the agency at the address indicated above on or before the 10th of the month following the month in which the service(s) were rendered. Invoices shall contain, at a minimum, the following information: Contract and order number (if any), item numbers, description of supplies or services, sizes, quantities, unit prices, and extended totals.

PAYMENT TERMS

The Commonwealth shall pay all invoices in accordance with KRS 44.010, KRS 45.453 and KRS 45.454, which basically is “when due, and within 30 working days after receipt of approved invoice.” Vendor/ Contractor/Proprietor with the ability to accept credit card transactions must accept the Commonwealth Procurement Card (MasterCard) for payment of services

KENTUCKY SALES AND USE TAXES

Sales of tangible personal property or services to the State of Kentucky and its agencies are not subject to state sales or use taxes. The agency shall furnish the tax exemption number for applicable tax exempt purchases.

Document Description Page 10 http://www.lrc.state.ky.us/kar/200/005/330.htm

GOVERNMENTAL MANDATES (WORKMAN’S COMPENSATION, UNEMPLOYMENT INSURANCE,

ETC)

The Vendor/Contractor/Proprietor is responsible for compliance with all applicable mandates concerning this agreement. For the purposes of this contract the Vendor/Contractor/Proprietor is deemed to be an independent agent and is not considered to be an employee of the Commonwealth.

COMPLIANCE WITH STATE LAWS

Contracts and orders shall be governed by the laws of the Commonwealth of Kentucky. The rights and obligations of the parties thereto shall be determined in accordance with these laws.

CONTRACT MODIFICATIONS

No modification to this contract shall be permitted unless the contractor receives written approval from the Commonwealth of Kentucky.

If the contractor believes modifications are necessary, he/she may request approval of the Commonwealth of Kentucky. All contract modifications shall be subject to the provisions of 200 KAR 5:311.

The agency reserves the right to modify this agreement for the addition or deletion of requirements deemed necessary by the agency with the mutual agreement of both parties; however modifications will not result in the expenditures against this contract exceeding $20,000 per fiscal year.

TERMINATION OF CONTRACT

Either party may terminate this agreement at any time for just cause, or either party may cancel this agreement with thirty (30) days written notice.

METHOD OF AWARD

Award will be made to the lowest evaluated responsive, responsible best value offeror. The agency will issue a notification of award accepting the best value offer. Prompt Payment may be considered in award criteria. The scoring of bids/proposals is subject to Reciprocal preference for Kentucky resident bidders and Preferences for a Qualified Bidder or the Department of Corrections, Division of Prison Industries. See below.

ACCESS TO RECORDS

The contractor, as defined in KRS 45A.030 (9) agrees that the contracting agency, the Finance and Administration Cabinet, the Auditor of Public Accounts, and the Legislative Research Commission, or their duly authorized representatives, shall have access to any books, documents, papers, records, or other evidence, which are directly pertinent to this contract for the purpose of financial audit or program review.

Records and other prequalification information confidentially disclosed as part of the bid process shall not be deemed as directly pertinent to the contract and shall be exempt from disclosure as provided in KRS 61.878(1)(c). The contractor also recognizes that any books, documents, papers, records, or other evidence, received during a financial audit or program review shall be subject to the Kentucky Open Records Act, KRS 61.870 to 61.884.

VALIDITY OF OFFER

This offer is valid for sixty (60) days.

Method of Award Best Value - Ranking Approach

The Commonwealth intends to award a contract to the vendor, whose offer, conforming to the solicitation, is the most advantageous on the basis of "best value" for all products, services, and requirements contained herein.

An evaluation committee, or a designated individual, will evaluate the information provided by the vendor in response to the established measurable criteria contained in the solicitation.

Measurable Criteria:

Total Cost 90 Points Delivery 5 Points Warranty 5 Points Total Points 100 Points

Document Description Page 11

Each vendor is responsible for submitting all relevant, factual and correct information with their offer to enable the evaluator(s) to afford each vendor the maximum score based on the available data submitted by the Vendor.

A bidder shall submit one (1) response to a solicitation and shall not propose more than one (1) model/brand for each item listed in the solicitation, except for requested tier pricing. Multiple or alternate bids offering more than one (1) bid price in total or by line item shall be rejected.

Vendors responding with the minimum Best Value requirements in this solicitation shall not be credited with Best Value points. Vendors responding with greater than the minimum requirements shall receive Best Value points. Failure to provide adequate information will impact the evaluated points awarded to the vendor.

COST: maximum 90 points

The bidder with the lowest Price receives the maximum score. The bidder with the next lowest Price receives points by dividing the lowest Price by the next lowest price and multiplying that percentage by the available points. For example, if 90 points is allocated to the lowest Price criteria for this procurement, bidder "A" bids $100.00 as the lowest bidder and receives the maximum 90 points ($100.00 / $100.00 = 1.00 x 90 = 90). Assume bidder "B" is the next lowest bidder at $125.00, then "B" receives 76 points ($100.00 / $125.00) = .080 x 90 = 72).

WARRANTY; maximum 5 points

BIDDERS ARE TO ENTER THEIR WARRANTY PERIOD IN MONTHS IN THE SPACE

PROVIDED BELOW.

The bidder shall clearly state the warranty for this procurement. Warranty period must be specific and such phrases as, "as required", "as soon as possible", or "prompt" have no meaning and may result in a non-responsive bid.

For example, if the best warranty offer is 24 months, that bidder receives maximum points. If the next best warranty offer is 18 months, that bidder receives 3.75 points. (18/24 = .75 X 5 = 3.75 points, etc.)

DELIVERY; maximum 5 points

Prompt delivery is desired. That bidder with the Best Delivery offer will received maximum points.

Other offers will be scored by dividing the best offer by the next best offer and multiplying the available points by that resulting percentage.

For example, if the best delivery offer is 20 days, that bidder receives maximum points. If the next best delivery offer is 30 days, that bidder receives 3.35 points. (20/30 = .67 X 5 = 3.35 points, etc.)

The vendor agrees that when delivery/service is not made within the contracted due date, one percent (1%) per day will be deducted from the vendor’s invoice for each day the vendor fails to meet the contracted delivery/service date.

The Commonwealth reserves the right to negotiate all aspects of the solicitation with the evaluated best value vendor.

Best Value scoring is subject to Reciprocal preference for Kentucky resident bidders and Preferences for a Qualified Bidder or the Department of Corrections, Division of Prison Industries (KAR 200 5:410).

Document Description Page 12

KRS 45A.490 Definitions for KRS 45A.490 to 45A.494.

As used in KRS 45A.490 to 45A.494:

(1) "Contract" means any agreement of a public agency, including grants and orders, for the purchase or disposal of supplies, services, construction, or any other item; and

(2) "Public agency" has the same meaning as in KRS 61.805.

KRS 45A.492 Legislative declarations.

The General Assembly declares:

(1) A public purpose of the Commonwealth is served by providing preference to Kentucky residents in contracts by public agencies; and

(2) Providing preference to Kentucky residents equalizes the competition with other states that provide preference to their residents.

KRS 45A.494 Reciprocal preference to be given by public agencies to resident bidders -- List of states -- Administrative regulations.

(1) Prior to a contract being awarded to the lowest responsible and responsive bidder on a contract by a public agency, a resident bidder of the Commonwealth shall be given a preference against a nonresident bidder registered in any state that gives or requires a preference to bidders from that state. The preference shall be equal to the preference given or required by the state of the nonresident bidder.

(2) A resident bidder is an individual, partnership, association, corporation, or other business entity that, on the date the contract is first advertised or announced as available for bidding:

(a) Is authorized to transact business in the Commonwealth; and

(b) Has for one (1) year prior to and through the date of the advertisement, filed Kentucky corporate income taxes, made payments to the Kentucky unemployment insurance fund established in KRS 341.490, and maintained a Kentucky workers' compensation policy in effect.

(3) A nonresident bidder is an individual, partnership, association, corporation, or other business entity that does not meet the requirements of subsection (2) of this section.

(4) If a procurement determination results in a tie between a resident bidder and a nonresident bidder, preference shall be given to the resident bidder.

(5) This section shall apply to all contracts funded or controlled in whole or in part by a public agency.

(6) The Finance and Administration Cabinet shall maintain a list of states that give to or require a preference for their own resident bidders, including details of the preference given to such bidders, to be used by public agencies in determining resident bidder preferences. The cabinet shall also promulgate administrative regulations in accordance with KRS Chapter 13A establishing the procedure by which the preferences required by this section shall be given.

(7) The preference for resident bidders shall not be given if the preference conflicts with federal law.

(8) Any public agency soliciting or advertising for bids for contracts shall make KRS 45A.490 to 45A.494 part of the solicitation or advertisement for bids.

The reciprocal preference as described in KRS 45A.490-494 above shall be applied in accordance with

200 KAR 5:400.

Determining the residency of a bidder for purposes of applying a reciprocal preference Any individual, partnership, association, corporation, or other business entity claiming resident bidder status shall submit along with its response the attached Required Affidavit for Bidders, Offerors, and Contractors Claiming Resident Bidder Status. The BIDDING AGENCY reserves the right to request documentation supporting a bidder's claim of resident bidder status. Failure to provide such documentation upon request shall result in disqualification of the bidder or contract termination.

A nonresident bidder shall submit, along with its response, its certificate of authority to transact business in the Commonwealth as filed with the Commonwealth of Kentucky, Secretary of State. The location of the principal office identified therein shall be deemed the state of residency for that bidder. If the bidder is not required by law to obtain said certificate, the state of residency for that bidder shall be deemed to be that which is identified in its mailing address as provided in its bid.

Preferences for a Qualified Bidder or the Department of Corrections, Division of Prison Industries (KAR 200 5:410).

Pursuant to 200 KAR 5:410, and KRS 45A.470, Kentucky Correctional Industries will receive a preference equal to twenty (20) percent of the maximum points awarded to a bidder in a solicitation. In addition, the following "qualified bidders" will receive a preference equal to fifteen (15) percent of the maximum points awarded to a bidder in a solicitation: Kentucky Industries for the Blind, any nonprofit corporation that furthers the purposes of KRS Chapter 163 and any qualified nonprofit agencies for individuals with severe disabilities as defined in KRS 45A.465(3). Other than Kentucky Industries for the Blind, a bidder claiming "qualified bidder" status shall submit along with its response to the solicitation a notarized affidavit which affirms that it meets the requirements to be considered a qualified bidder- affidavit form included. If requested, failure

Document Description Page 13 to provide documentation to a public agency proving qualified bidder status may result in disqualification of the bidder or contract termination.

Past Vendor Performance may be considered in the award of this Contract. Vendors with a record of poor performance in the last 12 months may be found non-responsible and ineligible for award.

Successful bidder shall submit an Annual Affidavit for Bidders, Offerors and Contractors prior to issuing an award.

Document Description Page 14