Final_Redacted_Touch Panel Assy Drawing_CUI.pdf

8 7 6

PARTS LIST

ITEM QTY UOM PART NUMBER DESCRIPTION REF DES

1 1 EA TS-TPC-8950 TOUCH PANEL

2 1 EA TS-4900-2048-4096F-Q 1 OS-RTC-E COMPUTER MODULE

3 1 EA SDSQXBG-032G-ANCMA MICRO SD CARD

3 ALT 1 EA SDSQXPJ-064G-ANCM3 MICRO SD CARD

D 3 ALT 1 EA SDC128GU3 MICRO SD CARD, 128 GB

4 6 EA MS16995-9 SCREW, #4-40 X 0.250, SOCKET HEAD-HEX

5 6 EA MS15795-803 WASHER, FLAT, #4 (.125 ID X .25 OD X .022 THK)

6 6 EA MS35338-135 WASHER, LOCK, #4 (.112 ID X .209 OD X .025 THK)

7 AR EA 42520 LOCTITE 425, PLASTIC SAFE, REMOVABLE, 20G

8 EGG-OE SOFTWARE VERSION DESCRIPTION (SVD)

9 1 EA HS-21X21X15 HEAT SINK

10 (4) REF SCREW, CROSS-HEAD, EXISTING WITH WASHER

11 1 EA LRU IUID LABEL PLATE

NOTES:

1. REFER TO MIL-HDBK-454 FOR ASSEMBLY GUIDANCE. FOR ELECTRICAL

COMPONENTS DEFER TO IPC/WHMA-A-620A CLASS 3. (4 PLCS) 10

2. UNLESS OTHERWISE STATED, APPLY THREADLOCKER TO ALL

NON-LOCKING THREADED FASTENERS DURING ASSEMBLY.

C 3. UNLESS OTHERWISE STATED, TORQUE FASTENERS AS INDICATED

BELOW, ± 10% IN-LB.

SCREW

SIZE

#4-40

WET

TORQUE

3.0

DRY

TORQUE

4.5

VENDOR

TECHNOLOGIC SYSTEMS

TECHNOLOGIC SYSTEMS

SANDISK

SANDISK

HYUNDAI TECHNOLOGY

HENKLE

TECHNOLOGIC SYSTEMS

TECHNOLOGIC SYSTEMS

4. NOTE DELETED. STIFFENER SHOWN INSTALLED

FOR REFERENCE AS DELIVERED.

B

A

SET JUMPERS, PROGRAM SD CARD, AND INSTALL SD CARD INTO SD

SLOT IN ACCORDANCE WITH SVD, ITEM 8, WHICH WILL BE PROVIDED

BY NSWCDD DNA, CODE A32.

ITEMS 1 AND 2 COME PRE-ASSEMBLED FROM THE MANUFACTURER. THE

HARDWARE TO MOUNT ITEM 2 TO ITEM 1 IS PRE-INSTALLED WITH ITEM 1.

REPLACE THE PRE-INSTALLED HARDWARE WITH ITEMS 4, 5, 6, AND 7.

STIFFENER COMES PRE-INSTALLED TO THE TOUCH PANEL BY THE

MANUFACTURER. REMOVE STIFFENER AND DISCARD. RE-INSTALL

ASSOCIATED HARDWARE.

PLACE LABEL APPROX. WHERE SHOWN. LABEL NOT TO COVER MARKED

OEM INFORMATION OR AIRFLOW INTAKE/EXIT.

FOR IUID MARKING OF LRU, AN EQUIVALENT LABEL THAT

MEETS MIL-STD-130N MAY BE USED.

� COMPLETE HUMAN-READABLE AND MACHINE-READABLE INFORMATION

(HRI & MRI) IN THE APPROPRIATE FIELDS OF THE LRU IUID LABEL PLATE.

THE MINIMUM MRI CONSISTS OF CONCATENATED CAGE, SERIAL AND PART

NUMBERS JAW MIL-STD-130N, CONSTRUCT #2. COMPLETE AS FOLLOWS:

CAGE: 53711

S/N: [ENTER SERIAL NUMBER]

P/N: [ENTER PART NUMBER]

CAGE

OUFP3

OUFP3

03LBO

03LBO

SK823

80205 80205 80205 04347

08YF5

OUFP3

OUFP3

NOTES

8,9,10

6 0

6X 6X 6X AR

3 2 1

REVISION HISTORY

REV SHEET ZONE DESCRIPTION DATE APPROVED

RELEASED FOR FULL RATE PRODUCTION

UPDATED ITEMS 1 AND 2

A ALL ALL UPDATED NOTE 4, DRS PRC 16-0595. 31-MAR-2017 LS

INCORPORATED FAU REDLINES

B 1 JAW TI-ECR-0094 22-MAR-2018 HE UPDATED ITEM 3 PN.

C 1 PL REVISED JAW ECP-0045.UPDATED PARTS LIST. REMOVED 21-0CT-2018 NB ITEMS 4-7 AND ADDED ITEM 8. REVISED NOTE 5.

D 1 PL REVISED JAW TI-ECP-0050. 07-AUG-2019 JRM

E 1 PL REVISED JAW E01488. UPDATED ITEM 9 23-0CT-2019 MS

REVISED JAW ECP NSV-MK2-0356, TI-ECR-0194, & TI-ECP-0064

F 1 PC UPDATED QTY ITEM 9, NOTE 1 & 6 22-APR-2020 MS

UPDATED VIEWS

UPDATED SYSTEM IN APP NOTE, DELETED NOTE 8 IAW G ALL ALL 04-AUG-2020 MS ECP-NSV-MK2-0356R1 7 TI-ECP-0064R1

H ALL ALL ADDED ITEM 11 AND NOTES 8, 9, 10 JAW TI-ECR-0241 15-SEP-2021 MS

J ALL PL UPDATED ITEM 8 JAW ECP NSV-MK2-0416 AND Tl ECP-0085 22-NOV-2021 MAG K 1 A3 UPDATED NHA IN APPLICATION NOTE AND FLAGNOTE 17-DEC-2021 SRA SYMBOL TO NOTES 8-10 JAW TI-ECR-0370

ADDED 3 AL T(PN:SDC128GU3) JAW TI-ECP-0142 &L ALL PL 28-MAR-2022 MAG NSV-MK2-0419

LUU------,, 11 00� (FAR SIDE)

CUI

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY;

CONTROLLED TECHNICAL INFORMATION, EXPORT CONTROLLED; 10 MAY

2018. OTHER REQUESTS SHALL BE REFERRED TO: NAVAL SURFACE

WARFARE CENTER DAHLGREN DIVISION DAM NECK ACTIVITY (NSWCDD

DNA), ATTN: CODE A30, 1922 REGULUS AVE, VIRGINIA BEACH, VA

23461-2097.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE

EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (SECTION

2751 OF TITLE 22, UNITED STATES CODE) OR THE EXPORT CONTROL

REFORM ACT OF 2018 (CHAPTER 58 SECTIONS 4801-4852 OF TITLE 50,

UNITED STATES CODE). VIOLATIONS OF THESE EXPORT LAWS ARE

SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25 AND DOD

INSTRUCTION 2040.

DESTRUCTION NOTICE: DESTROY BY ANY METHODS THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE

DOCUMENT.

DISCLOSURE STATEMENT: THIS INFORMATION IS FURNISHED UPON THE

CONDITION THAT IT OR KNOWLEDGE OF ITS POSSESSION WILL NOT BE

RELEASED TO ANOTHER NATION WITHOUT SPECIFIC AUTHORITY OF THE

DEPARTMENT OF THE NAVY OF THE UNITED STATES; THAT IT WILL NOT

BE USED FOR OTHER THAN MILITARY PURPOSES; THAT INDIVIDUAL OR

CORPORATE RIGHTS ORIGINATING IN THE INFORMATION, WHETHER

PATENTED OR NOT, WILL BE RESPECTED; THAT THE INFORMATION WILL

BE PROVIDED THE SAME DEGREE OF SECURITY AFFORDED IT BY THE

DEPARTMENT OF DEFENSE OF THE UNITED STATES.

CAD MAINTAINED: CHANGES SHALL BE INCORPORATED BY THE DESIGN

ACTIVITY

ALTERED ITEM DRAWING

APPLICATION UNLESS OTHERWISE SPECIFIED

1--------,,-------1 DIM ARE IN INCHES

NEXT ASSEMBLY USED ON

TOL ON ANGLE± 0° 30'

2 PL± .015 3 PL± .005 __ _.TITLE

DATE

8601113-115 ASSEMBLY DETAIL 1--------11-------I INTERPRET DRAWING IAW

ASME Y14.100 2004 4/21/2016

ASS EMBLY, TOUCH PANEL ANGLE PROJECTION DATE

4/21/2016

DATE

SIZE CAGE CODE DWGNO REV

4/21/2016

D 53711 8601113-115 LDATE

4/22/2016 SCALE NONE SHEET 1 OF 1

8 7 6 5 4 3 2 1

D

B

A

CUI

Controlled By: Department of the Navy Controlled By: NSWCDD DNA, DNA31 CUI Category: CTI, EXPT Distribution: Distribution Statement D POC: Lee Miller, lee.c.miller4.civ@us.navy.mil