FINAL_NGAGE_SOO (Draft).pdf

NGAGE Multiple Award Contract Statement of Objectives

Statement Of Objectives (SOO)

For

Support Equipment and Vehicles Next Generation Aircraft Ground Equipment Acquisition

(NGAGE)

Solicitation # FA8532-26-R-000X

06 June 2026

Prepared by:

Air Force Life Cycle Management Center (AFLCMC)

Combat Readiness Aircraft Generation (AG) (AFLCMC/ROZ) Robins Air

Force Base, GA 31098

I. Purpose:

This Statement of Objectives (SOO) defines the requirement for the development and fielding of multi-capable and innovative aircraft ground equipment (AGE) for the Aircraft Generation (AG) branch within Support Equipment and Vehicles Division (ROZ) under Program Executive Office (PEO) Combat Readiness (RO) of the Air Force Life Cycle Management Center (AFLCMC). The Period of Performance (PoP) for this Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Contract (MAC) vehicle shall not exceed 10 years.

The AGE Section manages and supports end-to-end life cycle of AGE in support of warfighter air vehicle launch, recovery, and operations & maintenance (O&M) activities at operating locations worldwide. The supported aircraft platforms include, but are not limited to fighter, bomber, cargo/airlift, tanker, and un-manned. AGE consists of items utilized on the ground to support aircraft maintenance of various aircraft systems. AGE is transported by air vehicles; however, it is not utilized while in the air.

II. Scope:

The overall scope of this SOO is to establish the requirements for the Next Generation AGE (NGAGE) IDIQ MAC to include, but not be limited to the following overarching AGE focus area categories to meet the end mission of launch, recovery, and O&M of aircraft:

a. Demonstrated production of AGE with more than one capability (for example, the legacy A/M32A-60A gas turbine generator providing both power and bleed air)

b. Demonstrated capability of Design/Development/Integration/Test/Production of Military Style AGE

c. Demonstrated capability of using Digital Engineering/Model-Based Systems Engineering (MBSE)

d. Demonstrated experience of innovating and modernizing AGE

The intent of this MAC is to allow rapid fund execution for designing, developing, testing, and implementing new solutions. This MAC is not intended for long-term sustainment, complete/full production runs, or build to print type acquisitions. Further, the Delivery Orders will not contain Interim Contractor Support (ICS), Contractor Logistics Support (CLS), or Advisory and Assistance Services (A&AS) support.

III. Execution:

Each individual delivery order will have its own established performance period based on the requirement, as well as supporting requirements documentation (Statement of Work, Purchase Description, etc. as applicable), Contract Line-Item Numbers (CLINs), and Contract Data Requirements Lists (CDRLs).

The NGAGE Ordering Guide provides procedures for ordering and administration. The contract terms are identified and explained in this ordering guide to facilitate the purchasing process. This MAC Indefinite Delivery Indefinite Quantity (IDIQ) Program serves to foster competition and give teams maximum flexibility to rapidly modernize the next generation of aerospace ground support equipment, allowing the Aircraft Generation Branch to keep pace with current and future technologies and trends for an ever-evolving weapons systems portfolio.

IV. Objectives:

1) Design, develop, integrate, and test hardware and software into new or existing

AGE.

2) Incorporate digital acquisition and sustainment practices to support Digital Materiel Management (DMM), which includes Digital Engineering (DE), Model Based Systems Engineering (MBSE), Agile Software, and Open System Architecture

(OSA).

3) To innovate and modernize multi-capable AGE with a minimum of two functional characteristics.

V. Special Areas of Interest:

1) Use of agile enabling processes, such as DE and OSA, to accelerate acquisition and provide the capability to AGE customers faster.

2) Explore new technologies to support and enhance systems and allow for rapid integration on both legacy and NGAGE. This includes initiatives for the rapid execution of innovative, emerging capabilities and technologies and products by developing, integrating, and proving through rapid prototyping and d e m o n s t r a t i o n /test.

3) Program Management support, inherent to the end item deliverables, to include but not limited to:

i. Cost, Schedule, and Performance Control

ii. Program Management Reviews (PMRs); i.e., quarterly

iii. Status Reports (SR); i.e., monthly/quarterly

iv. Systems Engineering

v. Technical Data, Provisioning Data and Configuration Management