FE230031390010.pdf
PDF 125 KB Posted
- Attached to
- 15' & 20' Flex wing Mower
- Solicitation number
- FE230031390007
About this file
This statement of work outlines the technical requirements for the purchase of one 20-foot flex wing mower to replace an unrepairable unit. The mower must have a cutting width between 19.6 and 21 inches, a cutting height of 2 to 14.6 inches, and a cutting capacity of at least 3 inches in diameter. It requires a tractor PTO of 70-100 horsepower, a gearbox of 220-250 horsepower, and an acceptable speed of 540-1000 RPM. The driveline must be category 5 or greater for the main and wing decks. The decks must be made of 7-gauge or heavier steel with reinforcement in vital areas and include grease fittings at all pivot points. Tires should be between 20-24 inches, foam filled or better for both road travel and varied landscapes, and not laminated. Safety features such as single or double deflectors made of chain or stronger material are also required.
This statement of work is in support of federal contract opportunity number FE230031390007 issued by the Department of the Air Force Materiel Command to procure one 15-foot and one 20-foot flex wing mower.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FE230031390007.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work
For
Purchase One (1) 20' Flex Wing Mower
L Background:
88 CES Grounds Maintenance section requires the purchase of one (1) new and unused 20' flex wing mower to replace the old, unrepairable worn out 20' flex wing mowers currently in inventory.
IL Scope:
Flex wing mowers perform mission essential functions. They are crucial to the mowing of the airfield and base perimeter security by maintaining mission requirements set forth by AFPAM 91-212 Bird Aircraft Strike Hazard (BASH) and Air Force Common Output Level Standards (AFCOLS). Failure to meet these standards could result in the closing of the airfield and unauthorized entry into the base. They mow on varying terrains such as flat, rolling and steep, varying degrees of grass depth and type as well as around obstacles.
Ill Minimum Technical Requirements:
Cutting
1. Cutting width between 19.6" through 21"
2. Cutting height minimum of at least 2" and no more than 14.6"
3. Cutting capacity of no less than 3" diameter
Horsepower (HP) and Speed
1. Tractor PTO between 70hp and l00hp
2. Gearbox between 220hp to 250hp
3. Acceptable speed no less than 540rpm up to and including 1000rpm
Driveline
1. Category 5 or greater for both main and wing
Deck Construction
1. Heavy Duty - Heavy duty construction required due to the normal operation and :function of the decks requiring them to cut tall grass which hides objects that will frequently damage the decks. IE: rocks, stumps, concrete markers, metal utility valves, etc...
2. 7 gauge steel or better
3. Should include, but not limited to, items such as: vital areas with reinforcement and/or protective plating and/or skid plates
4. Grease Fittings at all pivot points
Tires
1. Size between 20" through 24"
2. Foam filled or better is required due to both road travel and type of landscape areas being mowed
3. Laminated tires are not made for road travel
Safety I. Safety deflectors single or double are expectable
2. Safety deflectors made of chain or stronger material required. Plastic or rubber is not acceptable
3. Jack Stand
Other
1. Hitch assembly - Type of advanced hitch assembly that accounts for terrain.
Name changes per manufactures but most manufactures have these available.
Some standard some additional optional.
File details come from the government source that posted it. Updated .