FE230031390007.docx
DOCX document 12 KB Posted
- Attached to
- 15' & 20' Flex wing Mower
- Solicitation number
- FE230031390007
About this file
This statement of work outlines requirements for the purchase of one 15-foot flex wing mower to replace worn equipment for the 88th Civil Engineer Squadron Grounds Maintenance section. The flex wing mower must have a cutting width between 14.8 and 15.6 inches, cutting height of 2 to 14.6 inches, and cutting capacity of at least 3 inches in diameter. Horsepower requirements are between 60-70 HP for the tractor PTO and 220-250 HP for the gearbox, with an acceptable speed of 540-1000 RPM. The driveline category must be 5 or greater for the main and wing decks. Decks must be made of 7-gauge or heavier steel with reinforcement in vital areas and grease fittings at all pivot points. Tires should be between 20 and 30 inches in size, foam filled or better for both road travel and varied terrain, and not laminated. Safety features such as single or double deflectors made of chain or stronger material are expected. The hitch assembly must account for varying terrain.
The related federal contract opportunity is solicitation number FE230031390007 for the purchase of 15-foot and 20-foot flex wing mowers through the Department of the Air Force Materiel Command.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FE230031390010.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work For Purchase One (1) 15' Flex Wing Mower
L Background:
88 CES Grounds Maintenance section requires the purchase of one (1) new and unused 15' flex wing mower to replace the old, unrepairable worn out 15' flex wing mowers currently in inventory.
IL Scope:
Flex wing mowers perform mission essential functions. They are crucial to the mowing of the airfield and base perimeter security by maintaining mission requirements set forth by AFPAM 91-212 Bird Aircraft Strike Hazard (BASH) and Air Force Common Output Level Standards (AFCOLS). Failure to meet these standards could result in the closing of the airfield and unauthorized entry into the base. They mow on varying terrains such as but not limited to flat, rolling and steep, varying degrees of grass depth and type as well as around obstacles.
Ill Minimum Technical Requirements:
Cutting
1. Cutting width between 14.8" through 15.6"
2. Cutting height minimum of at least 2" and no more than 14.6"
3. Cutting capacity of no less than 3" diameter Horsepower (HP) and Speed
1. Tractor PTO between 60hp and 70hp
2. Gearbox between 220hp to 250hp
3. Acceptable speed no less than 540rpm up to and including 1000rpm Driveline
1. Category 5 or greater for both main and wing Deck Construction
1. Heavy Duty - Heavy duty construction required due to the normal operation and function of the decks requiring them to cut tall grass which hides objects that will frequently damage the decks. IE: rocks, stumps, concrete markers, metal utility valves, etc...
2. 7 gauge steel or better
3. Should include, but not limited to, items such as: vital areas with reinforcement and/or protective plating and/or skid plates
4. Grease Fittings at all pivot points Tires
1. Size between 20" through 30"
2. Foam filled or better is required due to both road travel and type oflandscape areas being mowed
3. Laminated Tires are not made for road travel
Safety
1. Safety deflectors single or double are expectable
2. Safety deflectors made of chain or stronger material required. Plastic or rubber is not acceptable
3. Jack Stand Other
1. Hitch assembly - Type of advanced hitch assembly that accounts for terrain. Name changes per manufactures but most manufactures have these available. Some standard some additional optional.
File details come from the government source that posted it. Updated .