FD2020600725-Packaging.pdf
PDF 69 KB Posted
- Attached to
- Microwave Isolator
- Solicitation number
- FA822626Q0725
About this file
This is a Packaging Requirements document (AFMC Form 158) establishing packaging and shipping specifications for federal contract FD20202600725-00, Version 1, issued on 19 May 2026. The document applies to item 1680ND102202GXM and mandates compliance with MIL-STD 129 (Revision R) and MIL-STD 2073-1 (Revision E) standards.
The primary packaging requirement specifies that all wood packaging material (WPM)—including pallets, skids, boxes, crates, and dunnage—must be constructed from debarked, heat-treated wood heated to 56 degrees Centigrade (133 degrees Fahrenheit) for a minimum of 30 minutes. Certification and marking by an accredited agency recognized by the American Lumber Standards Committee (ALSC) is mandatory, with reference to International Standards for Phytosanitary Measures (ISPM No. 15). All items shall be packaged in accordance with ASTM D3951 (Specification Commercial Packaging). Individual shipments exceeding 150 pounds, 108 inches in length, or 130 inches in girth plus length must be packaged on skidded crates or palletized for forklift handling. Exterior containers require marking readable from 24 inches stating "ASTM D3951 - NOT FOR OUTSIDE STORAGE." Shipping containers must comply with MIL-STD-129 military marking standards and any additional marking requirements specified on the AFMC Form 158, including unit serial numbers, original equipment manufacturer names, and model numbers. The packaging specialist is Wendy L. Monson (406 SCMS/GULAA), reachable at 801-777-1457.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| FA822626Q0725 Solicitation.pdf | ||
| FD2020600725-Transportation.pdf | ||
| FD2020600725-Form1348.pdf | ||
| Ombudsman-ODS_Note.pdf | ||
| FD2020600725-QA.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20202600725-00 VERSION: 1
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA Specification Commercial Packaging (ASTM-D-3951) COM
ITEM(S):
1680ND102202GXM
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
Specification Commercial Packaging (ASTM D3951)
(a) Items shall be packaged in accordance with American Society for Testing and Materials (ASTM) Specification D3951-98, Standard Practice for Commercial Packaging. Individual shipments exceeding 150 pounds, 108 inches in length, or 130 inches in girth plus length shall be packaged on skidded crates or palletized to allow handling by forklift. (b) The exterior container shall be marked (readable from 24 inches): "ASTM D3951 - NOT FOR OUTSIDE
STORAGE."
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Monson, Wendy L
PHONE NUMBER:
801-777-1457 / 777-1457
SIGNATURE:
//SIGNED//Monson, Wendy L
DATE:
26139 - 19 MAY 2026
Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 20 May 2026
File details come from the government source that posted it. Updated .