FC0003805 DOIT Scruntinizer Software Support Renewal 2027-2028 .pdf

Purchase Order Request for Proposals (PORFP) COTS Software Master Contract

Revised 090624 1

Section 1 –General Information

PORFP Number:

(eMMA BPM Number)

FC0003805

PORFP Type:

(Select one category from the drop-down list)

Fixed Price

Functional Area/s (FA) for this PORFP:

FA I – COTS Software FA II – Installation and Training Services FA III – Manufacturer's Software Maintenance

Note: FA II may not be purchased alone and may not exceed 49% of the PORFP value.

Manufacturer Name

(Enter one manufacturer only per PORFP)

Plixer ( Scrutinizer )

Designated Small Business Reserve?(SBR):

(Select "Yes" or "No" from the drop-down list)

No

PORFP Issue Date:

mm/dd/yyyy

10/21/2026 PROPOSAL DUE

DATE AND TIME:

11/2/2026 2:00 PM

EST

Place of Performance: 100 Community Place Crownsville, MD 21032

Special Instructions:

LIMITED TO MASTER CONTRACTORS

Only Master Contractors that are awarded a contract under the Commercial Off-the-Shelf Software (COTS 2012), 060B2490021, are eligible to submit a bid in response to this secondary competition Purchase Order Request for Proposal (PORFP). A current Master Contractor under the named contract may submit an LOA with their bid to be considered for the award.

BID SUBMISSION INSTRUCTIONS

Purchase Order Request for Proposal (PORFP) responses will only be accepted through the State's eMaryland Marketplace Advantage (eMMA) e-Procurement system.

Instructions on how to submit proposals electronically can be found at, under Vendor Instruction:

https://mdprocurement.freshdesk.com/support/solutions

Questions Due (Closing) Date and Time:

10/28/2026 at 2:00 PM EDT Questions must be submitted in writing with the subject line, "Question for PORFP # FC0003805N." They must be submitted via e-mail to the Procurement Officer cherise.edmonds@maryland.gov no later than the date and time specified.

https://mdprocurement.freshdesk.com/support/solutions

Revised 090624 2

PRICING PROPOSAL REQUIREMENTS

The Master Contractor's pricing proposal must clearly identify the business submitting the proposal and the applicable pricing for the term specified in this PORFP, including the start and end dates or duration, as applicable

SPECIAL REQUIREMENTS

1. The Department reserves the right to purchase more or less than the specified quantity to the extent limited by funding.

Charges that are multiple years shall be provided at a per-year price.

2. Purchase new and unused software.

3. The Master Contractor shall not impose a restocking fee if an item is returned due to damage or incorrect product shipped.

4. The Master Contractor must provide the estimated ship date/lead time for each item listed in the PORFP.

5. Please allow for pricing provided in response to this PORFP to be valid for at least 90 days after the set due date above.

6. The Master Contractor must be an authorized reseller for PLIXER. The state reserves the right to request a Letter of Authorization (LOA) from the Manufacturer or Distributor.

7. The Master Contractor must include a screenshot of the Manufacturer's Suggested Retail Price (MSRP) with the bid.

8. Bids must be received by the due date and time listed in the solicitation. Bids that are not received by the due date and time will not be accepted.

9. A "No Bid" form must be completed and submitted by the bid due date and time if your firm elects not to bid.

10. Master Contractors must ensure that the proposed COTS software is virus free.

11. Master Contractors shall furnish all agreements and terms and conditions the Master Contractor expects the State to sign or to be subject to in connection with or in order to use the products or to be provided under this PORFP. This includes physical copies of all agreements referenced and incorporated in primary documents, including but not limited to any software licensing agreement for any software proposed to be licensed to the State (e.g., EULA, Enterprise License Agreements, Professional Service agreement, Master Agreement) and any Acceptable Use Policy (AUP). The State is not bound to an agreement or any terms and conditions not provided in a Master Contractor’s Proposal and no action of

Revised 090624 3 the State, including but not limited to the use of any such software, shall be deemed to constitute acceptance of any such agreements or terms and conditions and any such agreement, terms or conditions are void ab initio and unenforceable against the State.

12. Software-as-a-Service (SaaS) Products and contracts are subject to the Additional Terms and Conditions specified in Attachment Y - Data Use Agreement.

Security Requirements (if applicable):

None

Invoicing Instructions:

Submit all invoices electronically to doitfiscal.invoiceservice@maryland.gov

An invoice not satisfying the requirements of a Proper Invoice (as defined at COMAR 21.06.09.01 and .02) cannot be processed for payment. To be considered a Proper Invoice, invoices must include the following information without error:

1) Contractor name and address;

2) Remittance address;

3) Federal taxpayer identification (FEIN) number, social security number, as appropriate;

4) Invoice period (i.e., the time period during which services covered by invoice were performed);

5) Invoice date;

6) Invoice number;

7) State-assigned Contract number;

8) State-assigned (Blanket) Purchase Order number(s);

9) Goods or services provided;

10) Amount due; and

11) Any additional documentation required by regulation or the Contract.

For items of work for which there is one-time pricing, those items shall be billed within 30 days of acceptance.

For items of work for which there is annual pricing, items shall be billed annually. The first year's invoice shall be billed within 30 days of contract start. Each additional year shall be billed on the anniversary of the first year's invoice.

Section 2 – Agency Point of Contact (POC) Information

Agency / Division Name: Department of Information Technology

Agency POC Name: Cherise Edmonds Agency POC

Phone Number:

(410) 697-9672

Agency POC E-mail Address:

Cherise.edmonds@marylan d.gov

Agency POC Fax:

mailto:doitfiscal.invoiceservice@maryland.gov mailto:Cherise.edmonds@maryland.gov mailto:Cherise.edmonds@maryland.gov

Revised 090624 4

Agency POC Mailing Address:

100 Community Place Crownsville MD 21032

Section 3 – Delivery Address / Work Site POC Information (if different from above)

Agency On-site Contact Name:

Kenny Bishop Brian Kline

Agency On-site Phone Number:

301-237-1680 443-829-5298

Agency On-site E-mail Address:

Kenneth.Bishop@maryland.

gov Brian.Kline@Maryland.gov

Agency On-site Fax:

Agency On-site Address: Maryland Department of IT (DOIT) 6958 Aviation Blvd Suite J Glen Burnie MD 21061

Section 4 – Scope of Work

FA I – COTS Software

(Provide product specifications below. If some or all specifications are unknown, Master Contractors may propose products based on a detailed description in the

Business Need / Required Functionality field*) *Business Need / Required Functionality

DOIT Scruntinizer Software Support Renewal 2026-2027

Product Name

Product

Description

Version

Release

Quantity of

Licenses

Due Date mm/dd/yyyy

1.

2.

3.

FA II – Installation and Training Services (Provide a detailed description of required services and deliverables)

Installation / Training Services

Deliverables

Start Date mm/dd/yyyy

End Date

1.

FA III - Manufacturer's Software Warranty / Maintenance (Provide a detailed description of warranty / maintenance requirements and deliverables)

Warranty / Maintenance

Requirements

Deliverables

Start Date

End Date

Revised 090624 5

1. (1) Scrutinizer Software Subscription license (unlimited interfaces, unlimited raw flow retention).

Part# SCR

Entitlement or contract information

3/1/2027 2/28/2028

Tyler Hunn Account Manager Office: 207-206-3043 Cell: 207-206-3075 Email: tyler.hunn@plixer.com

DOIT Existing Customer ID# S12918 Machine ID:

6YZ6XEPT66NPF6364A114PDV

Type: SCR | Exporters: 25 Servers: 1 | Reporters: 1

Section 5 – Evaluation Criteria

1. Price

Basis for Award Recommendation The agency Point of Contact listed in Section 2 will recommend the award to a responsive and responsible Master Contractor that provides the most advantageous offer considering the price and evaluation factors above. The agency Point of Contact will initiate and deliver a PO to the selected Master Contractor.

All awards from this PORFP shall comply with the requirements of COMAR 21.05.13.06.

mailto:tyler.hunn@plixer.com

NO BID NOTICE/VENDOR FEEDBACK FORM

To help us improve the quality of State solicitations and to make our procurement process more responsive and business-friendly, please provide comments and suggestions regarding this solicitation. Please return your comments with your response. If you have chosen not to respond to this solicitation, please e-mail or fax this completed form to the attention of the Agency Point of Contact listed in Section 2.

Title: Commercial Off-the-Shelf Software 2012 (COTS 2012) Solicitation No: 060B2490021

PORFP:

1. If you have chosen not to respond to this solicitation, please indicate the reason(s) below:

� Other commitments preclude our participation at this time.

� The subject of the solicitation is not something we ordinarily provide.

� We are inexperienced in the work/commodities required.

� Specifications are unclear, too restrictive, etc. (Explain in REMARKS section)

� The scope of work is beyond our present capacity.

� Doing business with the State is simply too complicated. (Explain in REMARKS section)

� We cannot be competitive. (Explain in REMARKS section)

� The time allotted for the completion of the Bid is insufficient.

� Prior State of Maryland contract experience was unprofitable or otherwise unsatisfactory. (Explain in REMARKS section)

� Other: _________________________________________________________

2. If you have submitted a response to this solicitation, but wish to offer suggestions or express concerns, please use the REMARKS section below.

REMARKS: _________________________________________________________________

Offeror Name: ________________________________ Date: _______________________

Contact Person: _________________________________ Phone (____) _____ - ________

Address: _________________________________________________________________

E-mail Address:____________________________________________________________