Fabrication_and_Installation_for_Four_(4)_Transportation_Vans.pdf

County of Orange, Sheriff-Coroner

Invitation for Bid for Fabrication and Installation for Four (4) Transportation Vans

IFB # 060-3143802-MB

For more information, please visit our online supplier portal, located at https://procurement.opengov.com/portal/ocgov

COUNTY OF ORANGE

Sheriff-Coroner

PROCUREMENT SERVICES

320 N. Flower Street, Santa Ana, CA 92703

Santa Ana, CA

92703

Date: Tuesday, October 6, 2026

INVITATION FOR BIDS

FOR: FABRICATION AND INSTALLATION FOR FOUR (4) TRANSPORTATION

VANS

BID MUST BE RECEIVED BEFORE:

October 30, 2026 / 4:00 pm

IFB # 060-3143802-MB

Procurement Services Regular Office Hours:

8:00 AM to 5:00 PM

Monday through Friday

The office is closed between 12:00 PM and 1:00 PM

Table Of Contents

1. General Information

2. General Instructions

3. Protest Procedures

4. Scope of Work

5. OCLSB and DVBE Preference Policies Certification Requirements

6. Electronic Fund Transfer (EFT)

7. Pricing

8. Supplier Responses

Attachments:

A - Model Contract - Transportation Vans

County of Orange IFB

Sheriff-Coroner - Fabrication and Installation for Four (4) Transportation Vans, 060-3143802-MB

SECTION 1. General Information

1.1 BACKGROUND

Our Transportation Bureau has four (4) vans that require inmate separation caging to ensure individuals are transported in accordance with their classification.

1.2 IMPORTANT NOTICE

The County has attempted to provide all information available. It is the responsibility of each Bidder to review, evaluate, and, where necessary, request any clarification prior to submission of a bid. If any person contemplating submitting a bid in response to this IFB is in doubt as to the true meaning of any part of the solicitation documents attached hereto or finds discrepancies in or omissions from the specifications, they must submit a written request for clarification/interpretation to the County Deputy Procurement Agent

(DPA), Mary Barreto, via the County’s online biding system.

1.3 CLARIFICATION/INTERPRETATION

If clarification or interpretation of this solicitation is considered necessary by County, a written addendum shall be issued and the information will be posted on County’s online bid system. Any interpretation of, or correction to, this solicitation will be made only by addendum issued by the County DPA. All addenda will be submitted and posted on the County’s online bidding system. It is the responsibility of each Bidder to periodically check the County’s online biding system to ensure that they have received and reviewed any and all addenda to this solicitation. The County will not be responsible for any other explanations, corrections to, or interpretations of the documents, including any verbal information.

All questions or requests for interpretation must be received within this solicitation's Question &

Answer section by Friday, October 23, 2026 before 5:00 pm.

1.4 COMMUNICATION

Bidders are not to contact other County personnel with any questions or clarifications concerning this solicitation. All questions regarding this solicitation must be submitted via the Question & Answer section of this solicitation within the County’s eProcurement Portal at:

https://procurement.opengov.com/portal/ocgov. Any County response relevant to this solicitation other than through or approved by County is unauthorized and will be considered invalid.

County's Deputy Procurement Agent, Mary Barreto, mbarreto@ocsheriff.gov, will provide all official communication concerning this solicitation.

1.5 BID VALIDITY

Bids will be valid for a period of 365 days after IFB closing date.

1.6 LOBBYISTS

County of Orange does not require and neither encourages or discourages the use of lobbyists or other consultants for the purpose of securing business.

ORANGE COUNTY BOARD OF SUPERVISORS

AND COUNTY AGENCY OFFICERS

Board of Supervisors

Janet Nguyen, First District Vicente Sarmiento, Second District Donald P. Wagner, Third District

Doug Chaffee, Fourth District Katrina Foley, Fifth District

County Agency Officers

Claude Parrish, Assessor Hugh Nguyen, Clerk-Recorder

Todd Spitzer, District Attorney-Public Administrator Don Barnes, Sheriff-Coroner

Shari L. Freidenrich, Treasurer-Tax Collector Andrew Hamilton, Auditor-Controller

SECTION 2. General Instructions

2.1 REVIEW

Before submitting a bid, Bidders shall carefully review the General Instructions and examine the solicitation contents, including the Model Contract Terms, Conditions and Scope of Work. Bidders shall include in their bid response a monetary sum to cover the cost of all items included in the Contract. The Model

Contract contained in this solicitation is the Contract proposed for execution. Upon award, awarded Bidder will be required to sign and submit Contract for execution.

2.2 RESPONSIVENESS

Responsive bids shall include completed submittals/attachments provided in the Supplier Responses.

2.3 BID SUBMISSION

Electronic Bids shall be submitted via the County’s online bidding system via the following link https://procurement.opengov.com/portal/ocgov. All required sections of the IFB as listed above, must be submitted via the County’s eProurement Portal. Bidder is solely responsible for “on time” submission of their electronic bid. The County will not accept late bids and no exceptions shall be made. County will only receive those bids that were transmitted successfully.

Note: Electronic Bids cannot be viewed by County until after the solicitation deadline. If you encounter any problems with your registration, system, bid submission, or other system issues, please contact OpenGov’s support staff via the live chat option or via email at procurement-support@opengov.com.

2.4 PRICING

A. Bid Prices: The bid prices quoted on this solicitation shall be firm for the entire contract term of the awarded Contract.

B. Addenda: Bid prices offered shall reflect all addenda issued by County.

mailto:procurement-support@opengov.com

C. Scope of Work: Bids shall be submitted only for the items and/or services as stated in the Scope of

Work, Attachment A of Model Contract; bids for other than the items and/or services listed will not be considered.

D. Firm Prices: The County will only consider firm price bids.

E. Profit: The net amount of profit will remain firm for the entire term of the Contract. Contract adjustments which increase Contractor’s profit will not be allowed.

F. Price Decreases: All price/rate decreases will automatically be extended to the County. Please reference Paragraph – Price Increase/Decrease provision for additional information.

G. Acceptance: Bids must be provided for each item separately, “all-or-none” bids will not be accepted unless in the best interest of the County.

2.5 NO SUBSTITUTIONS

The bidder is required to meet all specifications and requirements contained in this solicitation. No substitutions will be accepted, unless prior County written approval is received.

2.6 DISCREPANCIES

Bidder shall take all responsibility for any errors or omissions in their bids. Any discrepancies in numbers or calculations shall be interpreted to reflect the lowest price to the County.

If prior to contract award, a Bidder discovers a mistake in their bid which renders the Bidder unwilling to perform under any resulting contract, the Bidder must immediately notify the buyer and request to withdraw the bid. It shall be solely within the County's discretion as to whether withdrawal will be permitted. If the solicitation contemplated evaluation and award of "all or none" of the items, then any withdrawal must be for the entire bid.

If the solicitation provided for evaluation and award on a line item or combination of items basis, the County may consider permitting withdrawal of specific line item(s) or combination of items.

2.7 BID EXPENSES

The County shall not be liable for any expenses incurred by potential Contractors in the preparation or submission of their bids. Pre-contractual expenses are not to be included in the Contractor’s Pricing Sheet. Pre-contractual expenses are defined as, including but not limited to, expenses incurred by Bidder in:

A. Preparing its bid in response to this IFB.

B. Submitting that bid to the County.

C. Negotiating with the County any matter related to the bid; and, D. Any other expenses incurred by the Bidder prior to the date of the award and execution, if any, of the

Contract.

2.8 AWARD

Upon recommendation of Contract award, Bidder will be required to submit the following documents within seven (7) days of County notification, unless otherwise specified in the solicitation:

A. Insurance: Certificate(s) of Insurance, including additional Insured Endorsement(s); refer to Model

Contract, Article-Insurance

B. W-9 Form: Current signed W-9 (Taxpayer ID No & Certification), which includes Contractor’s

Legal Business Name(s). Out of State Suppliers are required to submit a 587/590 Form.

2.9 ACCEPTANCE/REJECTION/AWARD

A. Bids submitted in response to this IFB may become subject to public disclosure under the California

Public Records Act, and other applicable law. The County shall not be liable in any way for disclosure of any such records. Additionally, all bids shall become the property of the County.

B. The lowest responsive, responsible Bidder will be recommended for contract award.

C. Bids will be reviewed by the County for responsiveness to all requirements. The County has the right to reject any bid deemed unresponsive or lacking the resources or experience to adequately perform the services described herein.

D. Only those responsible, responsive bids meeting all solicitation requirements and specifications shall be further reviewed for consideration for award. Award shall be based on the lowest, responsive, responsible bid.

E. Please take notice, non-acceptance of the County of Orange terms and conditions, incorporated in model contract, may deem a bid non-responsive. County may not accept any other terms, conditions, or provisions contrary to those contained within this solicitation.

F. Final award determination shall be based upon the lowest responsive, responsible bid, and may also include a review of Bidder’s ability to meet the requirements and perform the services specified in this solicitation; Bidder’s references and past performance; and Bidder’s acceptance of County of Orange terms and conditions.

G. By submitting a response to this solicitation, Bidders agree to accept the decision of the County DPA as final.

H. Awarded Bidder will be required to sign a contract upon award. If Bidder is a corporation, signature will be provided in accordance with the corporation’s code as specified in this solicitation.

2.10 RIGHTS RESERVED TO COUNTY

The County reserves the right to:

A. Request a sample for determining equality with the specified brand.

B. Waive, at its discretion, any non-material defects, irregularity, or informality, which County deems correctable or otherwise not warranting rejection of the bid that do not result in any unfair competitive advantage.

C. Verify and validate any information prior to Contract Award and during the entire term of the

Contract.

D. Make multiple awards to Bidders for services requested in this solicitation, at its sole discretion, to serve the best interests of the County

E. Accept or reject in whole or in part any or all bids received as a result of this solicitation at its sole discretion and to solicit for new bids, as the best interest of the County may require.

F. Negotiate the final Contract with the lowest, responsive and responsible Bidder or Bidders as necessary to serve the best interests of the County.

G. Withdraw or cancel in part or in its entirety this solicitation at any time without prior notice and furthermore makes no representation that any contract will be awarded to any Bidder responding to this solicitation.

H. Award its total requirements to one Bidder or to apportion those requirements among two or more

Bidders as the County may deem to be in its best interests; therefore, bids must be provided for each item separately; “all-or-none” bids will not be accepted unless in the best interest of the

County.

I. Defer award of this Contract for a period of 180 days after the Bid opening. During this period, Bidders shall guarantee the prices quoted in their Bids. County and the lowest responsive, responsible Bidder may mutually agree in writing to extend this deferral period.

2.11 JOINT BIDS

Where two or more Bidders desire to submit a single bid in response to a solicitation, they must do so on a prime/subcontractor basis rather than as a joint venture. The County intends to contract with a single firm or multiple firms, but not with multiple firms doing business as a joint venture.

2.12 UNFAIR PRACTICES AND OTHER LAWS

Bidder warrants that its bid complies with the Unfair Practices Act (Business and Professions Code Section

17000 et seq.) and all applicable County, State and Federal laws and regulations.

2.13 INDEPENDENCE OF BID

By submitting a bid, Bidder swears under penalty of perjury that it did not conspire with any other supplier to set prices in violation of anti-trust laws.

2.14 AMERICANS WITH DISABILITY ACT (ADA)

To comply with the non-discrimination requirements of the ADA, it is the policy of the County to make every effort to ensure that its programs, activities and services are available to all persons, including persons with disabilities. For persons with a disability needing a reasonable modification to participate in the procurement process, or for persons having questions regarding reasonable modifications for the procurement process, you must contact the buyer listed in the solicitation.

2.15 DUNS NUMBER

The County requires a valid D-U-N-S number prior to Contract Award. If needed, your company may obtain one at no cost at www.dnb.com. If you are unable to provide/obtain a D-U-N-S number, please indicate so in your bid submission response.

2.16 UNIQUE ENTITY IDENTIFIER NUMBER (UEI)

The County requires a valid UEI number prior to Contract Award. If needed, your company may obtain one at no cost at www.usfcr.com. If you are unable to provide/obtain a UEI number, please indicate so in your bid submission response.

SECTION 3. Protest Procedures

Any actual or prospective bidder or respondent who alleges an error or impropriety in the solicitation or award of a contract may submit a grievance or protest to Mary Barreto at mbarreto@ocsheriff.gov, as set forth herein.

PROTEST PROCEDURES

All protests shall be typed under the protestor’s letterhead and submitted in accordance with the provisions stated herein. All protests shall include at a minimum the following information:

A. The name, address, and telephone number of the protestor;

B. The signature of the protestor or the protestor’s representative;

C. The solicitation or contract number;

D. A detailed statement of the legal and/or factual grounds for the protest; and, E. The form of relief requested.

Protest of Solicitation Specifications:

A. All protests related to solicitation specifications must be submitted to the Deputy Procurement

Agent (DPA), Mary Barreto at mbarreto@ocsheriff.gov, no later than five (5) business days prior to the Closing Date of the solicitation. Protests received after the five (5) business-day deadline will not be considered by the County.

B. In the event the protest of specifications is denied, and the protestor wishes to continue in the solicitation process, the protestor must still submit a bid/response prior to the close of the solicitation in accordance with the solicitation submittal procedures provided in this solicitation.

Protest of Award of Contract:

A. Protests related to the award of a contract must be submitted to the Deputy Procurement

Agent, Mary Barreto at mbarreto@ocsheriff.gov, no later than five (5) business days after the

Notice of Solicitation Results is provided by the DPA.

B. Protests relating to a proposed contract award received after the five (5) business day deadline will not be considered by the County.

C. If the five (5) business day period expires without the receipt of a protest, the department may move forward with the contract award or if necessary, file the item for approval by the Board of

Supervisors.

Protest Process

A. In the event of a timely protest, the County shall not proceed with the solicitation or award of the contract until the DPA issues a decision on the protest.

B. Upon receipt of a timely protest, the DPA will, within ten (10) business days of receipt of the protest, issue a decision in writing which shall state the reasons for the actions taken.

C. The County may, after providing written justification, make the determination that an immediate award of the contract is necessary to protect the substantial interests of the County. The award of a contract shall in no way compromise the protester’s right to the protest procedures outlined herein.

D. If the protestor disagrees with the decision of the DPA, the protestor may submit a written appeal to the County Procurement Officer requesting an appeal to the Procurement Appeals Board, in accordance with the process stated below.

APPEALS PROCESS

A. If the protestor wishes to appeal the protest decision of the Deputy Procurement Agent, the protestor must submit, within three (3) business days from receipt of the Deputy Procurement

Agent’s decision, a written appeal to the Office of the County Procurement Officer.

Written appeals must be sent by mail to the address below with a courtesy copy by email;

County of Orange/County Executive Office

County Procurement Office

400 W. Civic Center Drive, 5th Floor

Santa Ana, CA 92701

Attn: County Procurement Officer

CPOAppeals@ceo.oc.gov

B. Within fifteen (15) business days, the County Procurement Officer will review all materials in connection with the appeal, assess the merits of the protest and provide a written determination that shall contain his or her decision on whether the appeal shall be forwarded to the Procurement

Appeals Board.

C. The decision of the County Procurement Officer on whether to allow the appeal to go forward will be final and there shall be no right to any administrative appeals of this decision.

SECTION 4. Scope of Work

4.1 SCOPE OF SERVICES - CUSTODY “STATEWIDE” VANS - FULL BUILD

Contractor shall provide the installation of custom-built prisoner containment cells, equipment, accessories, and related components identified in this Scope of Work. All installation and services shall be performed in accordance with the County’s Terms and Conditions and the requirements set forth herein.

4.2 PARTS AND EQUIPMENT

Vendor shall provide the following equipment to complete installation:

mailto:CPOAppeals@ocgov.com

A. Custody Pad locks for mock up.

B. All radio equipment- including cables.

C. Fasten seatbelt stickers (X5 per van)

D. Tremco system.

E. OCSD will provide LCD monitor, camera system and all required components. Cameras will be mounted behind first & second row partitions to view passengers. Exterior cameras will be mounted on driver and passenger front fenders.

F. OCSD will also supply 800 MHz antenna cables (if needed).

G. Optional fogged material in front partition.

H. Other essential items in order to complete build

4.3 PARTS AND EQUIPMENT - ADDITIONAL

Contractor shall install the following customer parts and equipment:

1. Two (2) dual corner LED, in-line flasher, Tri-Color shall be installed in both headlights.

2. Two (2) dual corner LED, in-line flasher, Tri-Color shall be installed in both taillights.

3. Four (4) 6-led light head shall be installed in each prisoner sections to illuminate each prisoner compartment. Lights will only illuminate red. (To illuminate on door trigger if manufacture lights do not).

4. One (1) 12” map light mounted in the console to provide needed light to driver and passenger and in rear of vehicle to illuminate rear gun box.

5. Two (2) Squadron Pro Black lights will be flush mounted to the font of the bumper. These lights will be amber in color to burn through fog.

a. Fabrication: is associated to mount fog lights.

6. One (1) flip down visor light shall be installed on passenger side visor.

7. One (1) secure idle will be installed to keep engine safely running with key out of ignition.

8. One (1) rifle Blac-Rac will be installed in front partition.

9. One (1) Adjustable gun lock timer will be installed.

10. One (1) three outlet 12volt receptacle will be installed in driver compartment. Location to be determined.

11. Two (2) circuit breaker will be installed to protect all electronics components. The breaker will be mounted under the vehicle hood using:

a. Item TBD will complement the breaker

12. One (1) fuse block will be installed to electronics board to provide power to auxiliary lighting.

13. One (1) electronics board will be constructed of ¾ maple wood and carpeted. The board will be placed behind driver seat to hold all electronics.

14. One (1) siren speaker will be installed behind front bumper.

a. Item TBD will complement the siren speaker

15. One (1) 100W Air horn speaker installed.

16. One (1) side curtain air bag switch installed to disable curtain airbags. This product can disable multiple airbags, depending on how it is wired.

17. One (1) back up alarm will be installed.

18. One (1) three position 12-volt cigarette receptacle will be installed in console area for 12-volt power.

19. One (1) Tremco covert Anti-theft system.

20. All other equipment needed to complete the job is listed as: JOB MATERIALS. These includes zip ties, relays, nuts, bolts, etc.

21. Install wide angle tow mirrors mounted to existing mirrors.

22. Installation of external lock for rear back doors.

23. Four (4) Coat hangers for front of and rear of vehicle. Coat hanger mounted to caging for hanging handcuff locks.

24. Fasten seatbelt signs

4.4 FABRICATION

1. One (1) fabrication of custom front partition with double walled 3/8 Lexan cover and 16-gauge metal. (All Lexan will have small holes drilled to provide extra air flow). This does not include window Lexan.

a. One Camera will be recessed into front partition.

2. One (1) fabrication of custom middle row partition with two swing outdoors made out of metal tubing, 16-gauge sheet metal and Lexan. Lexan will have ventilation holes around the perimeter or door for air flow.

3. One (1) fabrication of custom 3rd row cage/ divider and shelving made out of 16-gauge metal, and Lexan.

4. Two (2) swing down dividers will be constructed to sections off 2nd and 3rd row seats. Doors will be constructed of round tubing and Lexan. Lexan will have ventilation holes to provide airflow.

5. One (1) custom fabrication of under seat plates to prevent inmates accessing wires and seat removal pins.

6. One (1) custom fabrication of rear cage/ divider & shelving will be constructed to incorporate mount for gun box and camera DVR Equipment.

7. All windows will have custom fabrication to accommodate Lexan covers and filler panels.

8. The two rear windows will be covered with expanded metal to for added protection.

9. Fabrication of custom door panels will be constructed to prevent manipulation of door..

10. One (1) fabrication of custom passenger side step with yellow line highlight will be constructed for prisoner loading and unloading.

11. One (1) Driver side step will be custom made.

12. One (1) fabrication of custom overhead console will be constructed to fit department supplied radio.

13. One (1) custom fabrication of air duct covers will be constructed out of metal throughout the van.

14. One (1) custom fabrication of light covers for factory dome lights and aftermarket red lights will be constructed out of metal to prevent tampering.

4.5 SERVICES

1. Contractor shall install all parts and equipment at contractor facility.

2. Labor to install all parts and equipment.

3. Contractor shall provide training on operation of all moving equipment if deemed necessary by technician receiving.

4. Any additional changes made to vehicle will be subject to a fee.

4.6 CAMERA REGULATION

A. Communications and Technology will spec and purchase the necessary AXON equipment and will provide detailed installation instructions along with the necessary equipment that will need to be installed by the vehicle upfitter (Cameras, Microphone, Antenna, Monitor, Crash Box).

B. Under no circumstances should the Vehicle upfitter attempt to order directly from AXON or any other vendor or Video recording equipment without prior written approval from Steven Page or

Rich Silva. The AXON system is proprietary and encrypted, thus making any other system incompatible with the established Sheriff’s Department standard for AXON applications.

4.7 DELIVERY LOCATION

A. Each Van will be inspected and received from contractor’s facility by customer.

4.8 SCOPE OF SERVICES - CUSTODY “POOL” VANS- FULL BUILD

Contractor shall provide installation of custom-built prisoner containment cells and other accessories.

Installation and services shall be provided in accordance with the County Terms and conditions and this

Scope of Work.

4.9 PARTS AND EQUIPMENT

Vendor shall provide the following equipment to complete installation:

A. Custody Pad locks for mock up.

B. All radio equipment- including cables.

C. Fasten seatbelt stickers (X5 per van)

D. Tremco system.

E. OCSD will provide LCD monitor, camera system and all required components. Cameras will be mounted behind first & second row partitions to view passengers. Exterior cameras will be mounted on driver and passenger front fenders.

F. OCSD will also supply 800 MHz antenna cables (if needed).

G. Optional fogged material in front partition.

H. Other essential items in order to complete build

4.10 PARTS AND EQUIPMENT - ADDITIONAL

Contractor shall install the following customer parts and equipment:

1. Two (2) dual corner LED, in-line flasher, Tri-Color shall be installed in both headlights.

2. Two (2) dual corner LED, in-line flasher, Tri-Color shall be installed in both taillights.

3. Four (4) 6-led light head shall be installed in each prisoner sections to illuminate each prisoner compartment. Lights will only illuminate red. (To illuminate on door trigger if manufacture lights do not).

4. One (1) 12” map light mounted in the console to provide needed light to driver and passenger and in rear of vehicle to illuminate rear gun box.

5. Two (2) Squadron Pro Black lights will be flush mounted to the font of the bumper. These lights will be amber in color to burn through fog.

I. Fabrication: is associated to mount fog lights.

6. One (1) flip down visor light shall be installed on passenger side visor.

7. One (1) secure idle will be installed to keep engine safely running with key out of ignition.

8. One (1) rifle Blac-Rac will be installed in front partition.

9. One (1) Adjustable gun lock timer will be installed.

10. One (1) three outlet 12volt receptacle will be installed in driver compartment. Location to be determined.

11. Two (2) circuit breaker will be installed to protect all electronics components. The breaker will be mounted under the vehicle hood using:

I. Item TBD will complement the breaker

1. One (1) fuse block will be installed to electronics board to provide power to auxiliary lighting.

2. One (1) electronics board will be constructed of ¾ maple wood and carpeted. The board will be placed behind driver seat to hold all electronics.

3. One (1) siren speaker will be installed behind front bumper.

I. Item TBD will complement the siren speaker

1. One (1) 100W Air horn speaker installed.

2. One (1) side curtain air bag switch installed to disable curtain airbags. This product can disable multiple airbags, depending on how it is wired.

3. One (1) back up alarm will be installed.

4. One (1) three position 12-volt cigarette receptacle will be installed in console area for 12-volt power.

5. One (1) Tremco covert Anti-theft system.

6. All other equipment needed to complete the job. These includes zip ties, relays, nuts, bolts, etc.

7. Install wide angle tow mirrors mounted to existing mirrors.

8. Installation of external lock for rear back doors.

9. Four (4) Coat hangers for front of and rear of vehicle. Coat hanger mounted to caging for hanging handcuff locks.

10. Fasten seatbelt signs

4.11 FABRICATION

1. One (1) fabrication of custom front partition with double walled 3/8 Lexan cover and 16-gauge metal. (All Lexan will have small holes drilled to provide extra air flow). This does not include window Lexan.

1. One Camera will be recessed into front partition.

2. One (1) fabrication of custom middle row partition with two swing outdoors made out of metal tubing, 16-gauge sheet metal and Lexan. Lexan will have ventilation holes around the perimeter or door for air flow.

3. One (1) fabrication of custom 3rd row cage made out of 16-gauge metal, and Lexan

4. Two (2) swing down dividers will be constructed to sections off 2nd and 3rd row seats. Doors will be constructed of round tubing and Lexan. Lexan will have ventilation holes to provide airflow.

5. One (1) custom fabrication of under seat plates to prevent inmates accessing wires and seat removal pins

6. One (1) custom fabrication of rear cage/ divider & shelving will be constructed to incorporate mount for gun box and camera DVR Equipment

7. All windows will have custom fabrication to accommodate Lexan covers and filler panels.

8. The two rear windows will be covered with expanded metal to for added protection.

9. Fabrication of custom door panels will be constructed to prevent manipulation of door.

10. One (1) fabrication of custom passenger side step with yellow line highlight will be constructed for prisoner loading and unloading.

11. One (1) Driver side step will be custom made.

12. One (1) fabrication of custom overhead console will be constructed to fit department supplied radio.

13. One (1) custom fabrication of air duct covers will be constructed out of metal throughout the van.

One (1) custom fabrication of light covers for factory dome lights and aftermarket red lights will be constructed out of metal to prevent tampering.

4.12 SERVICES

1. Contractor shall install all parts and equipment at contractor facility.

2. Labor to install all parts and equipment listed.

3. Contractor shall provide training on operation of all moving equipment if deemed necessary by technician receiving.

4. Any additional changes made to vehicle will be subject to a fee.

4.13 CAMERA REGULATION

A. Communications and Technology will spec and purchase the necessary AXON equipment and will provide detailed installation instructions along with the necessary equipment that will need to be installed by the vehicle upfitter (Cameras, Microphone, Antenna, Monitor, Crash Box).

B. Under no circumstances should the Vehicle upfitter attempt to order directly from AXON or any other vendor or Video recording equipment without prior written approval from Steven Page or

Rich Silva. The AXON system is proprietary and encrypted, thus making any other system incompatible with the established Sheriff’s Department standard for AXON applications.

4.14 DELIVERY LOCATION

A. Each Van will be inspected and received from contractor’s facility by customer.

SECTION 5. OCLSB and DVBE Preference Policies Certification Requirements

County of Orange Local Small Business (OCLSB) Preference and Disabled Veteran Business

Enterprise (DVBE) Preference Policies Certification Requirements

5.1 OCLSB:

Effective January 1, 2020, County of Orange Board of Supervisors adopted the OCLSB Preference policy. Implementation of the OCLSB Preference policy supports local businesses, the local economy and the development of the County’s tax base.

To be certified as a Local Small Business by the County of Orange, a business shall meet (1) and (2) below:

A. Local Business Requirements:

1. Maintains their principal center of operations (i.e. headquarters) within Orange County, and:

2. Has:

a. A business address located in the County of Orange that is not a post office box, or

b. A valid business license or certificate of occupancy issued by the County of Orange or by an Orange County city, or other documentation acceptable to the County of Orange.

B. Small Business Requirements:

1. Must be certified as a Small Business by the State of California Department of General

Services (DGS); and, C. Above requirements must be valid at the time of proposal submittal through the time of award of the contract. The terms and conditions of the contract shall additionally require the contractor to remain in compliance with the Local Business requirements (pursuant to subsection (a) above) through the term of the contract, including any extensions or renewals, and shall provide that contractor’s failure to comply may be construed by County as a material breach of the contract.

5.2 DVBE:

Effective January 1, 2021, County of Orange Board of Supervisors adopted the DVBE Preference policy.

The DVBE Preference policy supports local business opportunity, economy and the development of

County’s tax base, and in addition recognizes the service and sacrifice given by the men and women of our

Armed Forces.

To be certified as a Disabled Veteran Business Enterprise by the County of Orange, a business shall meet

(A) and (B) below:

https://caleprocure.ca.gov/pages/PublicSearch/supplier-search.aspx?psNewWin=true

A. Must be certified as a DVBE by the State of California Department of General Services (DGS);

and, B. DGS DVBE requirements must be valid at the time of bid/proposal submittal through the time of award of the contract. The terms and conditions of the contract shall additionally require the contractor to remain in compliance with the DVBE requirements (pursuant to subsection (a) above) through the term of the contract, including any extensions or renewals, and shall provide that the contractor’s failure to comply may be construed by the County as a material breach of the contract.

To participate as an OCLSB and/or DVBE please read and follow the process outlined in COUNTY OF

ORANGE LOCAL SMALL BUSINESS (OCLSB) AND DISABLED VETERAN BUSINESS

ENTERPRISE (DVBE) CERTIFICATION REQUIREMENTS in the SUPPLIER RESPONSES.

*NOTE: DVBE PREFERENCE IS NOT APPLICABLE TO PUBLIC WORKS OR A-E

CONSTRUCTION PROJECTS.

5.3 OCLSB/DVBE CERTIFICATION REQUIREMENTS:

County Of Orange Local Small Business (OCLSB) Preference And Disabled Veteran Business

Enterprise (DVBE) Certification Requirements

A. To participate as an OCLSB and/or DVBE the following requirements must be met:

1. Must be certified with State of California the Department of General Services (DGS) as a

Small Business.

2. Must be certified with DGS as an OCLSB and/or DVBE.

3. Maintains their principal center of operations (i.e. headquarters) within Orange County.

4. Certification must be valid at the date/time solicitation is closed, and it shall remain in effect at the time of contract award and through the term of the contract. County reserves the right to verify and/or reject incomplete documents.

5. Complete and sign the Affirmation form attached herein. The signed Affirmation form and the OCLSB Certificate are required and must be returned with the solicitation response.

Verify with County: Once a firm becomes certified by the DGS as a small business, the firm shall access the County’s OCLSB verification portal to search for their company legal name in the OCLSB verification database.

B. OCLSB or DVBE Preference provides for the following:

1. Invitation for Bid – IFB

A five percent (5%) deduction in the original bid price shall be applied to all confirmed

OCLSB or DVBE bidders for evaluation purposes. If the lowest bidder is a certified OCLSB or DVBE bidder, the contract will be awarded at the certified OCLSB or DVBE’s original bid price. The maximum allowable preference deduction is $100,000.

2. Request for Proposal - RFP

a. No Cost - Any Request for Proposals that does not include cost as a scoring criteria shall instead apply the five percent (5%) or eight percent (8%) preference percentage pursuant https://caleprocure.ca.gov/pages/PublicSearch/supplier-search.aspx?psNewWin=true https://caleprocure.ca.gov/pages/PublicSearch/supplier-search.aspx?psNewWin=true http://www.oclsbverify.com/ to the eligibility requirements above to a scoring criteria in the RFP that makes up no more than twenty percent (20%) of the total RFP.

b. With Cost - An additional five percent (5%) shall be applied to the total cost of each certified OCLSB or DVBE to obtain their final score. If the final score of any OCLSB or

DVBE matches the final score of a respondent who is not an OCLSB or DVBE, preference shall be given to the certified OCLSB or DVBE. If two or more OCLSBs and/or DVBEs have the same final score, the County shall determine the contract award based on the County’s best interests. Notwithstanding these preference procedures, the

Orange County Board of Supervisors reserves the right to award contracts in any other permissible manner in consideration of the County’s best interests.

C. Dual OCLSB and DVBE Preference provides for the following:

1. Business Certified as OCLSB and DVBE

If a State-certified OCLSB is also a State-certified DVBE, the preference given to that business shall be 8% instead of 5%.

D. Subcontractors

If bidder is submitting subcontractors to qualify for the OCLSB or DVBE preference, bidder must demonstrate through the Staffing Plan that 20% of the total bid amount is allocated to the OCLSB and/or DVBE subcontractor(s).

*NOTE: DVBE PREFERENCE IS NOT APPLICABLE TO PUBLIC WORKS OR A-E

CONSTRUCTION PROJECTS.

SECTION 6. Electronic Fund Transfer (EFT)

If awarded, the County offers Bidder the option of receiving payment directly to its bank account via an

Electronic Fund Transfer (EFT) process in lieu of a check payment. Payment made via EFT shall also receive an Electronic Remittance Advice with the payment details via e-mail. An e-mail address shall need to be provided to County via an EFT Authorization Form. A copy of the EFT form is attached as an Exhibit to this solicitation.

SECTION 7. Pricing

LIGHTING & SIREN EQUIPMENT

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

1 12" MAP LIGHT ON/OFF

SWITCH (LED)- ONE IN

CONSOLE

1 Each

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

2 6-LED LIGHTHEAD,

(RED/RED)MICROPULSE

ULTRA >>SOLID RED

LIGHTS, CAN BE

SWITCH TO WHITE<<-

LIGHTS INSTALLED IN

EACH PRISON

SECTIONS

4 Each

3 SQUADRON PRO

BLACK FLUSH MOUNT

LED AUXILIARY LIGHT

POD - UNIVERSAL

AMBER- FLUSH MOUNT

TO FRONT BUMPER

2 Each

4 FABRICATION TO

MOUNT LIGHTS FLUSH

TO BUMPER

1 Each

5 CORNER LED, INLINE

FLASHER, TRI-COLOR

RED/BLUE/WHITE

>>>HEADLIGHTS<<<<

2 Each

6 CORNER LED, INLINE

FLASHER, TRI-COLOR

RED/BLUE/AMBER

>>>TAIL LIGHTS<<<

2 Each

7 FLATLIGHTER LED

SERIES VISOR LIGHT

(RED/BLUE)

1 Each

8 SPEAKER W/O

BRACKET

1 Each

9 KIT, UNIVERSAL BAIL

BRACKET , ALL

VEHICLES

1 Each

10 UNDERCOVER, 100W

AIR HORN WITH

REMOTE

CUSTOM FABRICATION

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

11 FABRICATION OF

3RD ROW CAGE

SLIDER- MADE OUT

OF SQUARE

TUBING, LEXAN

AND 16 GAUGE

SHEET METAL.

INCLUDING VENT

HOLES &

BRACKETS

1 Each

12 FABRICATION OF

COVERS FOR AIR

DUCTS

THROUGHOUT VAN

1 Each

13 FABRICATION OF

DOOR PANELS

1 Each

14 FABRICATION OF

EXPANDED METAL

OVER REAR

WINDOWS

1 Each

15 FABRICATION OF

FRONT PARTITION

WITH 3/8 LEXAN

COVER - DOUBLE

LEXAN -RECESS

CAMERA IN

PARTITION

1 Each

16 FABRICATION OF

LEXAN WINDOWS

AND PLATES

NEEDED TO

INSTALL WINDOWS,

LEXAN FILLER

PANELS USING 3/8"

LEXAN

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

17 FABRICATION OF

LIGHT COVERS FOR

FACTORY DOME

LIGHTS AND AFTER

MARKET RED

LIGHTS

1 Each

18 FABRICATION OF

MIDDLE/ 2ND ROW

PARTITION WITH 2

SWING DOORS -

DOORS SHALL BE

LEXAN

1 Each

19 FABRICATION OF

OVERHEAD

CONSOLE FOR

COMMUNICATION

RADIOS

1 Each

20 FABRICATION OF

REAR CAGE/

DIVIDER &

SHELVING. TO

INCORPORATE

MOUNT FOR GUN

BOX AND CAMERA

DVR EQUIPMENT

1 Each

21 FABRICATION OF

SIDE STEPS FOR

PRISONER

LOADING AND

UNLOADING. BOTH

DRIVER AND

PASSENGER SIDE.

PASSENGER SIDE

MUST EXTEND TO

FRONT DOOR - STEP

WILL HAVE

YELLOW LINE ON

STEP.

1 Each

22 FABRICATION OF

SWING DOWN

DIVIDERS IN 2ND

AND 3RD ROWS

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

23 FABRICATION OF

UNDER SEAT

PANELS TO

PREVENT

TAMPERING

GUN RACK

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

24 D T-RAIL MOUNT 1

1082E BLAC-RAC 1

SMALL #2 KEY

1 Each

25 ADUSTABLE GUN

LOCK TIMER

JOB MATERIALS

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

26 MISC. PARTS, WIRE,

IP TIES, CLAMPS,

FASTENERS,

RELAYS, ETC.

1 Each

27 ABS FILLER PANELS

>>IF NEEDED<<

OTHER PRODUCTS

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

28 ELECTRONICS

BOARD WITH

CARPET- 3/4 MAPLE

WOOD WITH

CARPET - SI E AND

LOCATED IS TBD

ONCE VEHICLE

ARRIVES

1 Each

29 50A CIRCUIT

BREAKER

(SURFACE MOUNT)

2 Each

30 SEDAN / 2020

UTILITY CIRCUIT

BREAKER BRACKET

1 Each

31 FUSE BLOCK

STBLADE 6 CIRC

WITH GROUND

STUD AND COVER

1 Each

32 3-OUTLET 12 VOLT

RECEPTACLE

1 Each

33 BACKUP ALARM

102dB(A) - STUD

TERMINAL

1 Each

34 SIDE CURTAIN 2010

CHEVY EXPRESS

VAN

1 Each

35 SHIPPING FOR AOI 1 Each

36 SECURE IDLE 1 Each

37 SHIPPING FOR

SECURE IDLE

1 Each

38 STEEL HASP LOCK

ASSEMBLY FOR

REAR DOORS OF

VEHICLE

Line Item Description Quantity Unit of

Measure Unit Cost Total No Bid

39 WIDE ANGLE TOW

MIRRORS

MOUNTED TO

EXISTING MIRRORS

1 Each

40 COAT HANGERS

FOR FRONT AND

REAR OF VEHICLE.

COAT HANGERS

ARE MOUNTED TO

CAGING FOR

HANGING

HANDCUFF LOCKS

4 Each

41 FASTEN SEATBELT

SIGNS

1 Each

42 1996-2021

CHEVROLET

EXPRESS G/SERIES

VAN/GMC

SAVANNA TREMCO

COVERT ANTI-

THEFT SYSTEM

1 Each

43 SHIPPING FOR

TREMCO

SECTION 8. Supplier Responses

8.1 BID VALIDITY: *

Bids will be valid for a period of 365 days after the solicitation closing date.

☐ Please confirm

*Response required

8.2 CONTRACTOR INFORMATION

8.2.1 Name of Bidder*

Please state the Name of Bidder here.

If Bidder is a corporation, the legal name of the corporation shall be set forth in this section as the Name of Bidder and the name, title, and person authorized to sign contracts on behalf of the corporation shall be stated as well.

If Bidder is a partnership or joint venture, the true name of the firm shall be set forth as the Name of

Bidder and the name of the partner authorized to sign contracts on behalf of the partnership or joint venture shall be stated as well.

If submittal of this bid or signature of any document submitted with this bid is by an agent other than an officer of a corporation or a member of a partnership, a Power of Attorney must be on file with County prior to Bid opening, or must be submitted with the Bid; otherwise, the Bid may be rejected as non-responsive. You may upload this power of attorney under Additional Information later in this bid response.

*Response required

8.3 COMPANY PROFILE & REFERENCES

8.3.1 Company Legal Name*

*Response required

8.3.2 Company Legal Status*

Please state the status here (Corporation, Partnership, Sole Proprietor, etc.)

*Response required

8.3.3 Unique Entity Identifier Number (UEI)*

The County requires a valid UEI number with active registration status. Your company may obtain one at no cost at https://sam.gov/entity-registration.

*Response required

8.3.4 California Secretary of State registration - active and in good standing * Please upload your active certificate from the California Secretary of State.

CA Sec. of State Verification Link = https://bizfileonline.sos.ca.gov/search/business

If a Sole Proprietor - upload a document stating "Not applicable as a Sole Proprietor"

*Response required

8.3.5 D-U-N-S Number*

Please provide your company's DUNS number.

The County requires a valid D-U-N-S number prior to Contract Award. If needed, your company may obtain one at no cost at www.dnb.com. If you are unable to provide/obtain a D-U-N-S number, please indicate so in lieu of the number.

*Response required

8.3.6 Federal Taxpayer ID Number*

*Response required

8.3.7 California Department of Justice, Office of Attorney General active registration* For Non-Profit and/or Charitable organizations, please provide your active (registration status is current). All others enter N/A.

https://sam.gov/entity-registration https://bizfileonline.sos.ca.gov/search/business http://www.dnb.com/

• RCT Registration Number

• Renewal/Expiration Date

DOJ Verification Link - https://rct.doj.ca.gov/Verification/Web/Search.aspx?facility=Y

*Response required

8.3.8 Active Licenses*

Please state all active licenses issued by the California State Contractor's License Board to the company whose legal name is above.

*Response required

8.3.9 Corporate Office Address*

What is the address of the company's corporate office? Please provide the full street/mailing address.

*Response required

8.3.10 Local Business Address(es)*

Please provide the local business address for the company named above. If there are multiple local addresses then please provide all.

• Full address:

• Telephone Number:

• E-mail Address:

*Response required

8.3.11 Length of Time Firm Has Been In Business*

Please clearly state, in months and years, how long your firm has been in business.

*Response required

8.3.12 Length of Time At Current Location*

Please clearly state, in months and years, how long your firm has been in business at its current location.

*Response required

8.3.13 Regular Business Hours*

*Response required

8.3.14 Regular Holidays and Hours When Business Is Closed*

*Response required

8.3.15 Corporation?*

Is your firm incorporated?

☐ Yes

☐ No https://rct.doj.ca.gov/Verification/Web/Search.aspx?facility=Y

When equals "Yes"

8.3.16 State of Incorporation?*

You have indicated that your firm is incorporated. Please provide the name of the State of

Incorporation.

*Response required

When equals "Yes"

8.3.17 Contract Signature Authority - Executive Signature*

If incorporated, please provide the name, contact number, and email of the person who would provide this signature authority. The Executive Signer Authority comes from the President, Vice-President, or

Chairperson of the Board.

• Contact Full Name:

• Contact Number:

• E-mail Address:

*Response required

When equals "Yes"

8.3.18 Contract Signature Authority - Financial Signature*

If incorporated, please provide the name, contact number, and email of the person who would provide this signature authority. The Financial Signer Authority comes from the Secretary, Assistant

Secretary, Chief Financial Officer, or Treasurer.

• Contact Full Name:

• Contact Number:

• E-mail Address:

*Response required

When equals "No"

8.3.19 Contract Signature Authority*

If not incorporated, please provide the name, contact number, and email of the person who has the binding and signature authority of this contract.

• Contact Full Name:

• Contact Title:

• Contact Number:

• E-mail Address:

8.3.20 Sole Proprietor Under Different Name?*

Is your firm a sole proprietor doing business under a different name?

☐ Yes

☐ No

*Response required

When equals "Yes"

8.3.21 Sole Proprietor's Name*

You have indicated that your firm is a sole proprietorship doing business under a different name.

Please provide the sole proprietor's name and the name you are doing business under.

*Response required

8.3.22 Contact Person for Solicitation*

Please provide the following in relation to the point of contact for this solicitation:

• Contact Person Full Name

• Contact Person Telephone Number

• Contact Person Email Address

*Response required

8.3.23 Project Manager*

Please provide the following regarding who will be your project manager for this project:

• Project Manager Full Name

• Project Manager Telephone Number

• Project Manager Email Address

*Response required

8.3.24 Contact Person for Accounting*

Please provide the following in relation to the point of contact for Accounting:

• Contact Person Full Name

• Contact Person Telephone Number

• Contact Person Email Address

*Response required

8.3.25 Emergency Contact*

In the event of an emergency of declared disaster, the following is required:

• Contact Person Full Name (during non-business hours)

• Contact Person Telephone/Cellphone Number

• Contact Person Email Address

*Response required

8.3.26 References*

Do you have letters from at least three references (not including County of Orange References) that include:

• Reference Names

• Addresses of site where work was performed

• Contact Name

• Telephone Number of Contact

• Contact Email Address

• Contract Effective Dates

• Contract Amount

• Brief Contract Descriptions

If you do not have letters you will be able to provide the same information electronically in the next question by answering "No" here.

☐ Yes

☐ No

*Response required

When equals "Yes"

8.3.27 References - Letters*

Please upload your letters from at least three references (not including County of Orange References) that include:

• Reference Names

• Addresses of site where work was performed

• Contact Name

• Contact Email Address

• Telephone Number of Contact

• Contract Effective Dates

• Contract Amount

• Brief Contract Descriptions

When equals "No"

8.3.28 References - Information*

Please provide the following information regarding at least three references (not including County of

Orange References):

• Reference Names

• Addresses of site where work was performed

• Contact Name

• Telephone Number of Contact

• Contact Email Address

• Contract Effective Dates

• Contract Amount

• Brief Contract Descriptions

The references will be contacted for verification, and these contacts must be current and able to respond promptly.

*Response required

8.4 BIDDER CERTIFICATION

8.4.1 Conflict of Interest*

Bidder must certify either Yes or No below:

Bidder certifies current/past financial, business or other relationship(s) with the County exist/existed as follows:

A. (Yes) Disclose any financial, business or other relationship with the County of Orange, any other entity that the Orange County Board of Supervisors governs*, or any Orange County Board member, officer or employee, which could affect or influence award of the contract for the services you propose to provide.

B. (No) Bidder certifies that no relationships exist/existed as outlined in item I above.

*Orange County Board of Supervisors govern: All Assessment Districts, All Community Facilities

Districts, All Reassessment Districts, Housing and Community Development Commission, Housing

Successor Agency to the Orange County Development Agency, In-Home Supportive Services Public

Authority, Industrial Development Authority For Orange County, Local Redevelopment Authority

Marine Corp Air Station (MCAS) El Toro, Orange County Financing Authority, Orange County

Flood Control District, Orange County Housing Authority, Orange County Housing Authority

Acting As the Housing Successor Agency, Orange County Public Financing Authority, Orange

County Special Financing Authority, South…