Rev. 2_FA9101-20-Q-2009_QnA.pdf

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS AIR FORCE TEST CENTER (AFMC)

EDWARDS AIR FORCE BASE CALIFORNIA

6 Aug 2020

MEMORANDUM FOR WHOM IT MAY CONCERN

SUBJECT: FA9101-20-Q-2009, Vertical CNC Machine, Questions and Answers, Rev. 2

1. Will the government off load and place the machine in the spot of operation and connect the electrical to the machine?

The vendor will be responsible for providing all rigging to offload and install the machine inside the shop.

To clarify, the Government will supply utility hookups such as air and electrical and ensure the facility is wired and ready for the machine to hook up. However, the vendor will be responsible for performing the final panel connections inside the machine prior to acceptance.

2. The requirement at item 2.1.7 of the Requirements Document states a need for a

Renishaw probe system. The Marposs probing system is considered a commercial equal, is that acceptable?

Renishaw is required due to existing infrastructure and shop personnel expertise.

The Marposs system would require user training and additional shop supplies to maintain.

3. What is the building voltage?

The building has 230V AC and 440V AC. The current machine is connected to

230V.

4. Can the Government recommend local riggers and electricians?

Rigging: Southwest Rigging and Greene Crane and Rigging

Electrical: Southwestern Electrical and Zuni Electric