PF2_-_RFP_-_Attachment_3_-_DD254.pdf

PDF 405 KB Posted

Attached to
COMSATCOM Pathfinder #2
Solicitation number
FA8808-17-R-0004
Issued by

About this file

PF2 - RFP - Attachment 3 - DD254

View the file

Other files

File Type Posted
PF2-RFP-Attachment_5-addenda_to_52_212-1,_v4.pdf PDF
SF30;_Amendment__5.pdf PDF
PF_2_RFP;_Question__Answer_(_ao_25_Aug_17).pdf PDF
PF2_-_Model_Contract_(SF_1449),_v1.pdf PDF
PF_2_RFP;_Question_and_Answer_(ao_17_Aug_17).pdf PDF
PF_2_RFP,_Question_-_Answer_(ao_11_Aug_2017).pdf PDF
PF2-RFP-Attachment_5-addenda_to_52_212-1,_v3.pdf PDF
SF30;_Amendment__4.pdf PDF
PF2-RFP-Attachment_5-addenda_to_52_212-1.pdf PDF
SF30;_Amendment__3.pdf PDF
PF2_-_Industry_Q&A.pdf PDF
PF2_-_RFP-Attachment_5-_Appendix_1_Volume_II-Tab_T3-Cybersecurity_Compliance_Matrix_(CCM).xlsx XLSX spreadsheet
SF30;_Amendment__2.pdf PDF
PF2-Model_Contract_(SF1449).pdf PDF
PF2_-_RFP-Attachment_1-Statement_of_Work_(SOW)-Appendix_1-TAB_2-Sample_Transmission_Plan.xlsx XLSX spreadsheet
SF30;_Amendment__1.pdf PDF
PF2_-_RFP_-_Attachment_5_-_addenda_to_52.212-1,_v1.pdf PDF
PF2_-_RFP_-Exhibit_A_CDRLs.pdf PDF
PF2_-_RFP_-_Attachment_1_-_Statement_of_Work_(SOW)_-_Appendix_1_-TAB_2_-Sample_Transmission_Plan.pdf PDF
PF2_-_RFP_-_Attachment_2_-Technical_Requirements_Document_(TRD).pdf PDF
PF2_-_RFP_-_Attachment_5_-_Appendix_1_Volume_II_-_TAB_T3_-_Cybersecurity_Compliance_Matrix_(CCM).pdf PDF
PF2_-_RFP_-_Attachment_5_-_addenda_to_52.212-1.pdf PDF
PF2_-_RFP_-_Attachment_4_-_Commercial_Interim_Payment_Plan.pdf PDF
PF2_-_RFP_-_Exhibit_A-CDRLs_A002_Attachment_-Cybersecurity_Compliance_Matrix_(CCM).pdf PDF
PF2_-_RFP_-_Attachment_6_-_addenda_to_52.212-2.pdf PDF
PF2_-_RFP_-_Attachment_1-Statement_of_Work_(SOW).pdf PDF
PF2_-_Model_Contract_(SF_1449).pdf PDF
Show all 27

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DEPARTMENT OF DEFENSE

CONTRACT SECURITY CLASSIFICATION SPECIFICATION

(The requirements of the DoD Industrial Security Manual apply to all security aspects of this effort.)

1. CLEARANCE AND SAFEGUARDING

a. FACILITY CLEARANCE REQUIRED

b. LEVEL OF SAFEGUARDING REQUIRED

2. THIS SPECIFICATION IS FOR: (X and complete as applicable)

a. PRIME CONTRACT NUMBER

b. SUBCONTRACT NUMBER

c. SOLICITATION OR OTHER NUMBER DUE DATE (YYYYMMDD)

3. THIS SPECIFICATION IS: (X and complete as applicable)

a. ORIGINAL (Complete date in all cases)

REVISION NO.

c. FINAL (Complete Item 5 in all cases)

DATE (YYYYMMDD)

b. REVISED (Supersedes all previous specs)

DATE (YYYYMMDD)

DATE (YYYYMMDD)

4. IS THIS A FOLLOW-ON CONTRACT? YES NO. If Yes, complete the following:

Classified material received or generated under (Preceding Contract Number) is transferred to this follow-on contract.

5. IS THIS A FINAL DD FORM 254? YES NO. If Yes, complete the following:

In response to the contractor's request dated , retention of the classified material is authorized for the period of

6. CONTRACTOR (Include Commercial and Government Entity (CAGE) Code)

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

7. SUBCONTRACTOR

a. NAME, ADDRESS, AND ZIP CODE b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

8. ACTUAL PERFORMANCE

a. LOCATION b. CAGE CODE c. COGNIZANT SECURITY OFFICE (Name, Address, and Zip Code)

9. GENERAL IDENTIFICATION OF THIS PROCUREMENT

10. CONTRACTOR WILL REQUIRE ACCESS TO: 11. IN PERFORMING THIS CONTRACT, THE CONTRACTOR WILL:YES NO YES NO

a. COMMUNICATIONS SECURITY (COMSEC) INFORMATION

b. RESTRICTED DATA

c. CRITICAL NUCLEAR WEAPON DESIGN INFORMATION

d. FORMERLY RESTRICTED DATA

e. INTELLIGENCE INFORMATION

(1) Sensitive Compartmented Information (SCI)

(2) Non-SCI

f. SPECIAL ACCESS INFORMATION

g. NATO INFORMATION

h. FOREIGN GOVERNMENT INFORMATION

i. LIMITED DISSEMINATION INFORMATION

j. FOR OFFICIAL USE ONLY INFORMATION

k. OTHER (Specify)

a. HAVE ACCESS TO CLASSIFIED INFORMATION ONLY AT ANOTHER

CONTRACTOR'S FACILITY OR A GOVERNMENT ACTIVITY

b. RECEIVE CLASSIFIED DOCUMENTS ONLY

c. RECEIVE AND GENERATE CLASSIFIED MATERIAL

d. FABRICATE, MODIFY, OR STORE CLASSIFIED HARDWARE

e. PERFORM SERVICES ONLY

f. HAVE ACCESS TO U.S. CLASSIFIED INFORMATION OUTSIDE THE U.S., PUERTO RICO, U.S. POSSESSIONS AND TRUST TERRITORIES

g. BE AUTHORIZED TO USE THE SERVICES OF DEFENSE TECHNICAL INFORMATION

CENTER (DTIC) OR OTHER SECONDARY DISTRIBUTION CENTER

h. REQUIRE A COMSEC ACCOUNT

i. HAVE TEMPEST REQUIREMENTS

j. HAVE OPERATIONS SECURITY (OPSEC) REQUIREMENTS

k. BE AUTHORIZED TO USE THE DEFENSE COURIER SERVICE

l. OTHER (Specify)

DD FORM 254, DEC 1999 PREVIOUS EDITION IS OBSOLETE. Adobe Professional 7.0

12. PUBLIC RELEASE. Any information (classified or unclassified) pertaining to this contract shall not be released for public dissemination except as provided by the Industrial Security Manual or unless it has been approved for public release by appropriate U.S. Government authority. Proposed public releases shall be submitted for approval prior to release

a. TYPED NAME OF CERTIFYING OFFICIAL

Direct Through (Specify)

d. ADDRESS (Include Zip Code)

Yes No to the Directorate for Freedom of Information and Security Review, Office of the Assistant Secretary of Defense (Public Affairs)* for review.

*In the case of non-DoD User Agencies, requests for disclosure shall be submitted to that agency.

13. SECURITY GUIDANCE. The security classification guidance needed for this classified effort is identified below. If any difficulty is encountered in applying this guidance or if any other contributing factor indicates a need for changes in this guidance, the contractor is authorized and encouraged to provide recommended changes; to challenge the guidance or the classification assigned to any information or material furnished or generated under this contract; and to submit any questions for interpretation of this guidance to the official identified below. Pending final decision, the information involved shall be handled and protected at the highest level of classification assigned or recommended. (Fill in as appropriate for the classified effort. Attach, or forward under separate correspondence, any documents/guides/extracts referenced herein. Add additional pages as needed to provide complete guidance.)

14. ADDITIONAL SECURITY REQUIREMENTS. Requirements, in addition to ISM requirements, are established for this contract.

(If Yes, identify the pertinent contractual clauses in the contract document itself, or provide an appropriate statement which identifies the additional requirements. Provide a copy of the requirements to the cognizant security office. Use Item 13 if additional space is needed.)

Yes No15. INSPECTIONS. Elements of this contract are outside the inspection responsibility of the cognizant security office.

(If Yes, explain and identify specific areas or elements carved out and the activity responsible for inspections. Use Item 13 if additional space is needed.)

16. CERTIFICATION AND SIGNATURE. Security requirements stated herein are complete and adequate for safeguarding the classified information to be released or generated under this classified effort. All questions shall be referred to the official named below.

b. TITLE c. TELEPHONE (Include Area Code)

e. SIGNATURE

17. REQUIRED DISTRIBUTION

a. CONTRACTOR

b. SUBCONTRACTOR

c. COGNIZANT SECURITY OFFICE FOR PRIME AND SUBCONTRACTOR

d. U.S. ACTIVITY RESPONSIBLE FOR OVERSEAS SECURITY ADMINISTRATION

e. ADMINISTRATIVE CONTRACTING OFFICER

f. OTHERS AS NECESSARY

DD FORM 254 (BACK), DEC 1999

fac_clear: SECRET
safe_level: SECRET
prime_no:
xprime: Off
sub_no:
xsub: Off
xsolic: Yes
solic_no: FA8808-17-R-0004
due_date:
xspec3: Orig
orig_date:
rev_no:
rev_date:
final_date:
xfollowon: No
prec_no:
xfinal: No
req_dated:
period:
ctr_name:
ctr_cage:
ctr_ofc:
sub_name: N/A
sub_cage: N/A
sub_ofc: N/A
perf_loc:
perf_cage:
perf_ofc:
gen_id: THIS IS SECTION J, ATTACHMENT 3

NOTICE: DD 254 WILL BE ISSUED WITH FINAL RFP. SEE SECTION 3 OF THE STATEMENT OF WORK (SOW) IN THE DRAFT RFP FOR ANTICIPATED SECURITY REQUIREMENTS.

x10a: Yes
x10b: No
x10c: No
x10d: No
x10e1: No
x10e2: No
x10f: No
x10g: Yes
x10h: No
x10i: Yes
x10j: Yes
x10k: Yes
other10k: (1) Personnel Minimum Security Clearance
x11a: Yes
x11b: Yes
x11c: Yes
x11d: Yes
x11e: Yes
x11f: Yes
x11g: Yes
x11h: Yes
x11i: Yes
x11j: Yes
x11k: Yes
x11l: Yes
other11l: (1) Visit Access Requests

(2) Have Information Assurance Requirements

(3) Ensure subcontractors comply with all DD-254 requirements

xrelease: No
release_thru: DISA Public Affairs/CIO Offices, GSA Public Affairs, REDACTED Public Affairs Officer for REDACTED Information, Future COMSATCOM Services Acquisition Contracting Officers, DITCO Ordering Authority (for DoD task orders).
guidance: 10a. The requirements and procedures for the protection of COMSEC information are set forth in the National Industrial Security Program Operating Manual (NISPOM) [current edition: DoD 5220.22-M dated February 28, 2006]. The COMSEC requirements of the NISPOM are imposed on the contractor for safeguarding the COMSEC information. Contractor is authorized to receive Government furnished cryptographic equipment. Access to any classified COMSEC information requires special briefings at the contractor's facilities. Access to classified COMSEC information requires a final U.S. Government clearance at the appropriate level. Non-accountable COMSEC information, though not tracked in the COMSEC material control system, may still require a level or control within a document control system; refer to NSA/CSS Manual 3-16, Control of Communications Security Material, page E-4 for guidance. Methods of destruction of classified COMSEC material shall comply with the NISPOM (Ref: Section 5-705 of DoD 5220.2-M). Further disclosure of COMSEC information by a contractor, to include subcontracting, requires prior approval of the government contracting activity. DoD 5220.22-M provided under separate cover.

10e(2). The contractor will abide by DCID 6/6 (formerly 1/7), Security Controls on the Dissemination of Intelligence Information, 11 July 2001. Provided under separate cover.

10j. For Official Use Only information provided under this contract shall be safeguarded as specified in the NISPOM and the Defense Information System Network (DISN) Security Classification Guide [current edition: DISA Circular 300-110-3 dated August 14, 2008]. Contractor will be provided with and will abide by DoD Regulation 5400.7, DoD Freedom of Information Act Program, and DoDM 5200.1, Volume 4, Information Security Program: Controlled Unclassified Information (CUI). DISA Circular 300-110-3 and DoD Regulations 5400.7 and DoDM 5200.1, Volume 4 provided under separate cover.

xaddlsec: Yes
addl_sec: TEMPEST requirements apply; guidance provided in block 13 as reference item 11i. OPSEC requirements apply; guidance provided in block 13 as reference item 11j. Information Assurance requirements apply; guidance provided in block 13 as reference item 11l(2). Subcontractor compliance requirements apply; guidance provided in block 13 as reference item 11l(3).
xinsp: No
inspections:
cert_name: REDACTED
cert_title: REDACTED
cert_phone: (xxx) xxx-xxxx
cert_addr: REDACTED
cert_sign: REDACTED
x17a: Yes
x17b: Off
x17c: Yes
x17d: Yes
x17e: Yes
x17f: Yes
other_dist: DISA Industrial Security (MPS6)
Reset:

File details come from the government source that posted it. Updated .