List_of_Requirements.docx

List of Requirements

Part Number: BTQ-320-400-2503M-UV Qty: 10

PLATE BEAMSPLITTER, UV SPECS PER CVI LO CATALOG. Surface Flatness: 1λ at 633 nm Parallelism:1 arc minute R/T Tolerance at 45º: ±5% Clear Aperture: 90% of diameter Coating, 1st surface: All-dielectric partial reflection coating for 45°, surface marked with a dot, 2nd surface: Antireflection coated for <1.0% reflectance for 45° Material: Optical quality synthetic fused silica Angle of Incidence: 45° Diameter: Ø+0/–0.15 mm Thickness: 3.0±0.2 mm Surface Quality: 60-40 scratch and dig, beveled edges Shape: Round

Part Number BSC-250-400-050

BROADBAND HYBRID CUBE BEAMSPLITTERS, UV SPECS PER CVI LI CATALOG. A hybrid metal dielectric coating exhibits moderate absorption with little polarization sensitivity. These beamsplitters are fairly insensitive to changes in angle of incidence. Optical adhesive contact. Performance is relatively flat across a large spectral band. Transmission: 43%±6% for 280 – 400 nm wavelength range, 38%±6% for 250 – 280 nm wavelength range, s- and p-components matched to within 5% for both ranges Surface Flatness: λ/4 per clear aperture at 632.8 nm Transmitted Beam Deviation: <10 arc minutes Absorption: <24% Coating: <1% reflectance (entrance and exit faces) Material: UV-grade synthetic fused silica Edge Dimensions: A±0.3 mm Surface Quality: 40-20 scratch and dig, beveled edges

Part Number: PBSO-369.5-050 Qty: 20

HIGH ENERGY LASER LINE POOLARIZING CUBE BEAMSPLITTER. 369.5NM Optical Material: UV-grade fused silica Edge Dimension: A±0.25 mm Surface Quality: 20-10 scratch and dig Transmitted Beam Deviation: < 5 arc min Transmitted Wavefront Error: λ/4 at 633 nm Extinction Ratio: λ=532 nm or 1064 nm: Tp/Ts > 500:1, λ < 500 nm: Tp/Ts > 250:1 Transmission Efficiency: Tp > 95% Reflection Efficiency: λ > 500 nm: Rs > 99.5%, λ ≤ 500 nm: Rs > 99.0% Clear Aperture: ≥ 85% of central dimension Damage Threshold:

Pulsed 5 J/cm2, 20 nsec, 20 Hz @ 1064 nm cw: 1 MW/cm2 @ 1064 nm Antireflection Coating: R ≤ 0.25%, all entrance and exit surfaces. Optically contacted.

Reflected and transmitted beams separated by 90º

Part Number: PBSI-369.5-050

IBS HIGH ENERGY LASER LINE POLARIZING CUBE BEAMSPLITTER. 369.5NM Optical Material: UV-grade fused silica Edge Dimension: A±0.25 mm Surface Quality: 10-5 scratch and dig Transmitted Beam Deviation: < 3 arc min Transmitted Wavefront Error: λ/10 transmitted, λ/4 reflected Clear Aperture: ≥ 85% of central dimension Antireflection Coating: R ≤ 0.20%, all entrance and exit surfaces. Chemically Activated Direct Bonding™ (CADB®) Reflected and transmitted beams separated by 90º. Tp-pol > 95.0%. Extinction Ratio Tp/Ts > 500:1. Damage Threshold 2 J/cm2 @ 355 nm

Part Number: UPBS-369.5-050

CEMENTED UV LASER LINE POLARIZING CUBE BEAMSPLITTER. 369.5NM. Optical Material: UV-grade fused silica Edge Dimension: A±0.25 mm Surface Quality: 20-10 scratch and dig Transmitted Wavefront Error: λ/4 at 633 nm Extinction Ratio: Tp/Ts > 100:1 Transmission Efficiency: Tp > 90.0% Reflection Efficiency: Rs > 99.0% Clear Aperture: ≥ 85% of central dimension Field of View: ±2° typical Damage Threshold:

Pulsed: 10 mJ/cm2, 20 nsec, 20 Hz @ 266 nm cw: 10 W/cm2 @ 266 nm Antireflection Coating: R ≤ 0.25%, all entrance and exit surfaces. For use with fluences less than 10 mJ/cm2.

Optical adhesive contact

Part Number: TLM1-370-45-1025 Qty: 60

TUNABLE LASER LINE MIRROR. 370NM, 45 DEGREE AOI. High energy dielectric coating. Designed for Pulse Lengths > 130 fs. Coating Technology: Electron beam multilayer dielectric Adhesion and Durability: Per MIL-C-675C.

Insoluble in lab solvents.

Clear Aperture: ≥85% of central diameter Angle of Incidence: 0° or 45° options Reflectivity:

Angle of Incidence 0°:

R≥99.0% Angle of Incidence 45°:

R≥98.5% for p-polarization R≥99.0% for unpolarized R≥99.5% for s-polarization Damage Threshold:

Pulsed:

3.0 J/cm2, 7 nsec, 20 Hz @ 266 nm

5.0 J/cm2, 10 nsec, 20 Hz @ 532 nm

0.55 J/cm2, 50 fsec, 50 Hz @ 800 nm

20 J/cm2, 20 nsec, 20 Hz @ 1064 nm Continuous Wave: 10 MW/cm2 @1064 nm Bandwidth Tolerance: +0/–10% typical Center Wavelength Tolerance: ±3% Substrate Material:

λ<450 nm: UV-grade fused silica λ≥450 nm: N-BK7 glass S1 Surface Figure: λ/10 @ 633 nm before coating S1 Surface Quality: 10-5 scratch and dig S2 Surface Quality: Commercial polish Concentricity: ≤0.05 mm Radius Tolerance: ±0.5%

Part Number: QWPO-369.5-05-2 Qty: 30

ZERO ORDER QUARTZ WAVEPLATE. 369.5NM, RETARDATION: L/2 DIAMETER: 0.50". Antireflection Coating: R ≤ 0.25% per surface Transmitted Wavefront: λ/10 p-v at 633 nm Damage Threshold: 10 J/cm2, 20 nsec, 20 Hz;

1 MW/cm2 cw @ 1064 nm Clear Aperture: >= 85% of diameter for the unmounted waveplates Optical Material: Crystal Quartz Surface Quality: 10-5 scratch and dig Diameter: Ø +0/-0.25mm (unmounted), Ø ± 0.127 mm (mounted) Parallelism: ≤ 0.5 arc sec Retardation Tolerance: λ/200 to λ/500 at 23°C Bandwidth: 16 nm at 800 nm for λ/200 - λ/500, 80 nm at 800 nm for λ/50

Part Number: QWPO-369.5-05-4 Qty:10

ZERO ORDER QUARTZ WAVEPLATE.369.5NM RETARDATION: L/4 DIAMETER: 0.50". Antireflection Coating: R ≤ 0.25% per surface Transmitted Wavefront: λ/10 p-v at 633 nm Damage Threshold: 10 J/cm2, 20 nsec, 20 Hz;

1 MW/cm2 cw @ 1064 nm Clear Aperture: >= 85% of diameter for the unmounted waveplates Optical Material: Crystal Quartz Surface Quality: 10-5 scratch and dig Diameter: Ø +0/-0.25mm (unmounted), Ø ± 0.127 mm (mounted) Parallelism: ≤ 0.5 arc sec Retardation Tolerance: λ/200 to λ/500 at 23°C

Part Number: QWPO-369.5-05-2-AS10

AIR SPACE RING MOUNTED ZERO ORDER QUARTZ WAVEPLATE 369.5NM. RETARDATION: L/2 WAVEPLATE DIAMETER: 0.50" OUTSIDE HOUSING DIAMETER: 1.00". Antireflection Coating: R ≤ 0.25% per surface Transmitted Wavefront: λ/10 p-v at 633 nm Damage Threshold: 10 J/cm2, 20 nsec, 20 Hz;

1 MW/cm2 cw @ 1064 nm Clear Aperture: >= 85% of diameter for the unmounted waveplates Optical Material: Crystal Quartz Surface Quality: 10-5 scratch and dig Diameter: Ø +0/-0.25mm (unmounted), Ø ± 0.127 mm (mounted) Parallelism: ≤ 0.5 arc sec Retardation Tolerance: λ/200 to λ/500 at 23°C