Attachment_1_-Suite_H4_Product_List.doc

PRODUCT LIST FOR SUITE H4

FRAMES

Structural, heavy duty welded construction with punched front and back slotting to accept hook on components. .

· Multiple widths: 24”, 30”, 36”, 48” 60” 72” 96”.

· Multiple heights: 45”, 61”, 72”, 84”

· Double sided capability to allow for back to back configurations sharing frame.

· Fabric panels: Frames must accept fabric that extends the full height of frame.

UPRIGHTS

Structural vertical supports (legs) that create free standing structure when combined with welded frame, and is not dependant on other components for structural integrity.

· Multiple heights to match frames.

· Single and double sided uprights.

· Vertical cable management duct at rear of upright.

COMPONENTS AND ACCESSORIES

The following contains general components that are representative of typical lab configurations.

Component: Hook to frame at multiple heights (ie: 1” increments)

A) Worksurfaces: Laminate worksurface available in multiple depths (27” 36”), and widths (24”, 30”, 36”, 48”, 60”, 72”) depending on application.

B) Open Shelves: Steel with laminate end panels or laminate. Linear and corner shelves. Available in various widths (24”, 30”, 36” 48”, 60”, 72”) and depths (12”, 17”, 18”, 22”, 24”). Available as flat shelves or slanted to allow more ergonomic viewing angle. Shelves can be mounted both above and below worksurface.

C) Overhead locking compartments: Steel door available in multiple widths (24”, 30”, 36”, 48”).

D) 19” EIA Rackmount modules: Available in various heights (9”-81”)

E) White boards: That can be mounted within the modules of frames in 24”, 30” and 36” widths.

F) Cable management: Vertical ducts in uprights and horizontal ducts to match width of frames.

G) Fabric panels: Double wall construction providing internal cable management cavity.

H) Slatwall: Aluminum extruded slatwalls providing mounting points for display arms, filing devices, and other accessories to keep materials off of the worksurface.

I) Flat panel arms: For mounting flat panel monitors from 15” to 60”.

J) Electrical: Modular, frame mounted hard wired power system. System shall be 8 wire, 4 circuit, 20 amp. System shall be available with 24”, 30”, 36” dual sided, power blocks that accept two (2), three (3) or four (4) duplex outlets respectively. Wiring configurations shall allow for 3rd and 4th circuits to be wired as isolated grounds. Systems shall be directional to prevent multiple feeds from entering a single power block. Both duplex and simples outlets shall be available and provide numerical and color coding for circuit identification. System shall provide modular, pre-terminated power input, interconnect and pass through cabling in multiple lengths. System shall be UL listed for intended purpose.

K) Equipment racks: EIA 19” rack mount enclosures with fully welded frame, perforated front and rear doors, solid top and side panels. Available in multiple widths (24”, 27”, 30”) and heights (full and half). Rack equipped with 20 amp vertical power strip.

L) Cabinets: Comprehensive storage system designed to accommodate conventional filing and advanced multimedia storage. Should be modular in design so components can be changed out for application changes. Multiple heights (28”, 30”, 42”, 54”, 60”, 66”, 72”, 84”).

M) Mobility: Work Benches must have the option to be mobile (wheeled) when required by the mission function.

Accessories

A) Lighting: Both under shelf and overhead lighting should be available.

B) Mobile pedestal: Box/box/file configuration.

C) CPU holder

D) ESD controls: laminates, totes and bins, grounding bars.

Attachment 1

FA8751-16-Q-0266