Questions and Answers-FA860126Q0069.pdf
PDF 304 KB Posted
- Attached to
- 20643 PH4 Collaboration Furniture
- Solicitation number
- FA860126Q0069
About this file
This document is a Questions and Answers (Q&A) response issued by the Air Force Life Cycle Management Center (AFLCMC) regarding solicitation FA8601-26-Q-0069 for Collaborative Furniture F20643 PH4. Dated 23 July 2026, the document addresses four inquiries submitted by potential contractors regarding specifications for the furniture item.
The key clarifications provided are: (1) ST2 collaborative furniture must feature a mesh back rather than a wood back; (2) laminate is a mandatory requirement for the product; (3) dimensions of 15-18 inches deep and 30 inches wide are acceptable, with variance from standard sizing approved; and (4) the furniture unit must be mounted on metal legs with six paint color options available, rather than being flush to the floor. These answers establish definitive requirements for contractors responding to the solicitation and resolve ambiguities present in the original solicitation documents.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
AIR FORCE LIFE CYCLE MANAGEMENT CENTER
WRIGHT-PATTERSON AIR FORCE BASE OHIO
One AFMC…Powering the World’s Greatest Air Force
23 July 2026
FROM: AFLCMC/PZIBA
2275 D Street Building 16, Area B Wright-Patterson AFB OH 45433
SUBJECT: Response to Inquiries regarding FA8601-26-Q-0069, Collaborative Furniture F20643 PH4
Questions: Collaborative Furniture F20643 PH4- Solicitation FA8601-26-Q-0069
1. ST2: This item is duplicated, one with a wood back, and one with a mesh back.
Are both versions acceptable? Or is there a preferred one? The text says Wood back, and in the finishes section it says mesh.
Answer: ST2 is correct with the mesh back.
2. Basis of design Kimball Vernita is 100% powder coated material, is laminate a requirement?
Answer: Laminate is the requirement.
3. Most standard laminate product has a minimum of 15-18”deep & 30-36” wide, can you confirm if there is a +/- size will be acceptable?
Answer: Yes, 15-18” is acceptable and 30” is acceptable.
4. Is the unit to have legs or flush to the floor (see below)?
Answer: Metal legs with 6 options of paint to choose from.
CANDICE SNOW
AFLCMC/PZIBA, Contracting Officer
| 2026-07-23T15:05:08-0400 | |
| SNOW.CANDICE.LYNN.1423542060 |
File details come from the government source that posted it. Updated .