Q and A_FA8601-26-Q-0043_7 May 2026_CO Signed.pdf

DEPARTMENT OF THE AIR FORCE

BUSINESS AND ENTERPRISE SYSTEMS DIRECTORATE

WRIGHT PATTERSON AIR FORCE BASE, OHIO

7 May 2026

FROM: AFLCMC/PZIBA

1940 Allbrook Drive, Room 142 Wright-Patterson AFB OH 45433

SUBJECT: Response to Inquiries Regarding FA8601-12-Q-0043

QUESTIONS

Question 1: Is this a totally different project than the other Bldg 20016 solicitation? Or is this in replacement of?

Response 1: There are multiple furniture projects at Bldg 20016. Due to CUI guidelines, we cannot share the specific room number or room title. Please pay attention to the specific solicitation numbers to discern the seperate projects.

Question 2: WS-1: 30” x 84” Workstation with 53” H Panels, just wanted to verify, the design and orientation is the same with that of FA8601-26-Q-0032?

Response 2: The design is not the same for the WS-1: 30” x 87” Please read the SOW and furniture plan to identify the difference between of FA8601-26-Q-0032 and FA860126Q0043.

Question 3: Regarding the stacking chairs, do they need to have an arm? Is 4 legs acceptable? The example provided is a Sled base. Poly back acceptable?

Response 3: Yes, an arm is required. 4 legs are acceptable and the chair must be stackable. Poly back is not acceptable. A fabric upholstered back is acceptable in lieu of the specified mesh back

Question 4: In reference to the Buffet Credenza, is quantity 2 36"w with a 72"w credenza top acceptable?

Response 4: The quantity is 1, per the SOW.

Speciation’s: 72” W x 24” D x 36” H Buffet Credenza with 4 Doors + 2 Drawers Material: High Pressure Laminate (HPL) Minimum of 8 Woodgrain Options Edge Profile: Square Pull: TBD Locking: Yes

Question 5: What material is the floor made from?

Response 5: Carpet

Question 6: How far away is the nearest electrical box?

Response 6: Please see updated furniture plans. If further guidance is required, please reach out to the contracting team.

Question 7: Is there an existing junction box to feed into?

Response 7: Yes

Question 8: Is the CH2.2 shown in the storage room actually the CH2.1 dollies?

Response 8: Yes. Furniture plan has been updated and uploaded to SAM.gov.

Question 9: Regarding the requested shelfing on the front of the workstation, as the workstation is 84” wide, constructed of (2) 42” wide panels, should the shelves be 42”, not 54” wide?

Response 9: For the WS-1 Workstation provide Two 42” W Open Shelves in lieu of 54” W. Updated SOW uploaded to SAM.gov.

Question 10: Is a 2mm edgeband on the workstation worksurfaces acceptable?

Response 10: No, 3mm Edgeband is standard requirement

Question 11: Is it the expectation that (7) flip top tables and (22) chairs (on dollies) fit in the indicated storage room?

Response 11: No

Question 12: Is DATA Network cabling Installation and testing being provided by the Base or by Awarded Contractor?

Response 12: Cabling and installation will be provided by the Base

Is the buffet veneer or laminate?

Response 13: Per the SOW: Material: High Pressure Laminate (HPL) Minimum of 8 Woodgrain Options.

How high do the stack chairs need to stack?

Response 14: Per the SOW: Stacks minimum of 18 Chairs

Question 15: Are there other storage areas for tables and chairs not listed on the floorplan provided?

Response 15: Yes, the government will store the tables and chairs in other areas as necessary.

Question 16: Is a mesh back absolutely required for CH-2, or would a solid polymer back be accepted if all other attributes match SOW factors?

Response 16: Yes, a mesh back is required.

Question 17: Is a loading dock available for delivery?

Response 17: Yes. There is a loading dock on the same floor as the delivery location. It can fit a standard box truck. There is an additional loading dock one floor above that does not have a clearance limit. There is a freight elevator available for this loading dock. No stairs required for either location.

NOTE: An updated Statement of Work and Furniture Plans have been uploaded to SAM.gov

Claire Hess Contracting Officer, PZIBA