Attatchment 3 - RFI Response.pdf
PDF 462 KB Posted
- Attached to
- AFIT 3D Metal Printer Federal contract opportunity
- Solicitation number
- FA860121R0061
About this file
This document contains a federal contract solicitation and related request for information responses. The Air Force is soliciting proposals to provide an additive metal 3D printer to be delivered and installed at Wright Patterson Air Force Base by October 14, 2021. Offerors must submit pricing for the equipment, delivery, setup, and installation. The printer must be capable of printing tungsten and molybdenum alloys and allow either independent printing of separate parts or simultaneous printing of the same part by two lasers. The contractor will be responsible for offloading the printer from the delivery truck and making final gas connections, while gas lines are available at the installation site. The fixed price award will be made based on technical quality and price factors to the offer that is most advantageous to the government.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 3 - RFI Responses.pdf | ||
| Attachment 1 - Solicitation - FA860121R0061.pdf | ||
| Attatchment 3 - RFI Responses.pdf | ||
| Attatchment 3 - RFI Responses.pdf | ||
| Attachment 3 - RFI Responses.pdf | ||
| Attachment 2 - FAR 52.204-24.pdf | ||
| Attachment 1 - Solicitation - FA860121R0061.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 3: RFI Responses
1. The solicitation calls for one 500 watt laser and one 1000 watt laser. Is there a preference to have two different laser wattages or can both lasers be 1000 watts?
a. No preference, both lasers may be 1000 Watts and they may deliver a 500 Watt & 1000
Watt pair.
2. Regarding the dual laser configuration, can you clarify how you would like the two lasers to operate? For example, two lasers building the same part or two lasers building two separate parts. Or one laser for testing?
a. Both lasers should be able to build the same part or act independently building different parts.
3. What types of material are you looking to print with?
a. Tungsten and molybdenum alloys
4. Offloading the machine from the delivery truck and setting the machine into place – Contractor Responsibility or Wright Patterson Responsibility?
a. Contractor Responsibility.
5. Any sort of gas connections (nitrogen or argon) – Contractor Responsibility or Wright Patterson Responsibility?
a. Argon and nitrogen gas connections are available at the wall near where the printer will sit. Contractor will be responsible for making final connection from wall to printer.
File details come from the government source that posted it. Updated .