MINIMUM_REQUIREMENTS_updated.docx

MINIMUM REQUIREMENTS

FOR A

FE-SEM

GENERAL

This specification is for a complete Field Emission Scanning Electron Microscope (FE-SEM) system to provide high quality images, delivered on a firm fixed price contract.

The FE-SEM shall incorporate the following capabilities

1. Must have low voltage capabilities, capable of going less than 1kV, as well as 1 nm resolution at 1kV.

2. Must be able to install metallic samples.

3. FE-SEM must have fully-automated column alignments.

4. Must have a large chamber and must be able to accommodate Deben Microtest 300N. Must have 3 external ports or greater.

5. Must have plasma cleaner and CCD camera.

6. Must have a beam blanker to preserve delicate specimens.

7. FE-SEM must also enable drift corrected frame integration.

8. Must have a fully motorized 5 axis stage as well as 360 degree rotation ability with repeatability of axial movements.

9. Must have a minimum of 2048 pixels.

10. Must be compatible with Win 10 if not operating already with Win 10.

11. Must be compatible with EDAX brand Pegasus model, Energy-Dispersive X-ray Spectoscopy (EDS)-Elector Backscatter Diffraction (EBSD) system.

12. Must have variable pressure capability.

13. Total area for system must not exceed 9’L and 6’W.

14. Must be able to fit through 6’W door.

DESIGN APPROVAL

This is an off the shelf item and no custom modification of the design is expected.

TESTING AND TRAINING REQUIREMENTS

Contractor shall perform a Manufacturer’s Acceptance Test at the contractor’s facility before delivery. The contractor shall provide operations and installation training at the customer’s facility within 1 month of installation completion. At which time the contractor shall demonstrate that all components are functioning to design specifications. Contractor shall label all components, with part/model numbers and serial numbers, as necessary, to coincide with documentation and graphical interface. Labels must be compatible with the intended environment and permanent. Engraving/etching, metallic data plates, or similar are considered appropriate.

Training shall consist of familiarizing the owner with the machine (review of the Operators Manual). Training shall also cover all hardware and software to include controls.

SAFETY

Safety systems shall be included to prevent damage to equipment and personnel. Safety system shall protect equipment in the event of power loss. Warning labels on the equipment and documentation shall be included.

PERIOD OF PERFORMANCE

The contractor shall deliver a complete system no later than 9 months after contract approval.

DELIVERY

The company shall properly ship the system to the Air Force Institute of Technology at WPAFB, OH. All shipping costs to include insurance will be included in contractor’s proposal. Great care using standard, approved packaging methods shall be taken. Vendor will uncrate and install all supplied equipment for this purchase

WARRANTY

Free from defects in material and workmanship, under normal and proper use in accordance with our instructions in the maintenance manual, for the period of time of one year after receipt.

PAYMENTS

100% payment after delivery of FE-SEM and completion of associated Testing and Training Requirements.