PWS_002.pdf

PR: FD2060-16-70406 1

Performance-Based Work Statement for

DEFENSIVE ATE AUGMENTATION EQUIPMENT

(DAAE) REPAIR

PR# FD2060-16-70406

April 7, 2017

PR: FD2060-16-70406 2

1.0 DESCRIPTION OF SERVICES This Performance-Based Work Statement (PWS) outlines the tasks and duties the contractor shall perform in order to provide onsite test, evaluation, and repair of the Digital (DIG) DAAE, NSN 4920-01-183-5261, and Radio Frequency (RF) DAAE, NSN 4920-01-183-5260. The repair of the DAAE test stations shall result in a Fully Mission Capable (FMC) status of the station.

1.1 Objective(s): The objective of this effort is onsite repair of the Defensive Avionics Augmentation Equipment (DAAE) to bring stations up to fully mission capable (FMC) status. There are eight (8) Digital DIG DAAEs (NSN 4920-01-183-5261) and ten (10) Radio Frequency RF DAAEs (NSN 4920-01-183-5260) at Dyess AFB, Ellsworth AFB, Georgia ANG and WR-ALC Depot.

1.2 Benefit to United States Air Force (USAF): Successful repair of DAAE test stations to

FMC status. This in turn will result in increased operational test capability at the backshop level. It will further result in a reduction of backorders of B-I B avionics and defensive systems Line Replaceable Units (LRU). The increased availability of mission essential LRUs will benefit the United States Air Force (USAF) by improving the B-I B fleet's ability to protect or defend themselves from enemy detection or attack.

2.0 SERVICES SUMMARY (SS) Repair services performed under this contract shall meet the following objectives:

Performance Objectives PWS Para. Performance Threshold

Timeliness of Data Deliverables

4.2, 5.0, 5.1.2, 5.5.2, 5.5.4, 5.5.5, 5.5.7

The contractor shall deliver the required data items in accordance with schedule requirements identified on the DD Form 1423 for each data item. 100% compliance is required.

Successful test, evaluation, and minor repair of the DAAE test station

5.0, 5.1.3

The contractor shall complete the test, evaluation, and minor repairs of the DAAE station within thirty

(30) calendar days of the scheduled date established at the time a delivery order is placed. 100% compliance is required.

Compliance with Safety and Health Plan 5.5, 5.5.1 100% compliance is required.

Conduct acceptable Contractor Safety Program

5.5, 4.6.4 No more than 2 Class C mishaps per contract year

Zero Class A or B mishaps.

Mishap Notification and Reporting 5.5, 4.6.2, 4.6.3 No more than 1 instance of late mishap notification per contract year.

Contractor Manpower

5.7

Within 30 calendar days of contract/order award, the Contractor shall establish a record for the

PR: FD2060-16-70406 3

3.0 Government Property and Services

3.1 Government Property:

The government will provide, upon request of the contractor, pertinent background data such as existing engineering drawings, technical orders, deficiency reports, etc., excluding proprietary data. Requests shall be made through appropriate government contracting officer channels. All data shall be returned to the government at the conclusion of the contract period of performance.

3.1.1 Government Furnished Property (GFP)

The contractor shall furnish all material, support equipment, and test equipment. There will be no GFP associated with this effort.

3.2 Base Support

The government shall provide access to the contractor for entry into all government facilities as required. The contractor shall submit visit requests to the location they are traveling at least five (5) working days prior to scheduled visit date. The government will provide the contractor with points of contact for visit requests at each location.

3.3 Reporting Loss of Government Property

a. Definitions. As used in this clause— “Government property” is defined in the clause at FAR 52.245-1(a), Government Property. “Loss of Government property” means unintended, unforeseen, or accidental loss, damage, or destruction of Government property that reduces the Government’s expected economic benefits of the property. Loss of Government property does not include purposeful destructive testing, obsolescence, normal wear and tear, or manufacturing defects. Loss of Government property includes, but is not limited to—

(1) Items that cannot be found after a reasonable search;

(2) Theft;

(3) Damage resulting in unexpected harm to property requiring repair to restore the item to usable condition; or

(4) Destruction resulting from incidents that render the item useless for its intended purpose or beyond economical repair.

“Unit acquisition cost” means—

(1) For Government-furnished property, the dollar value assigned by the Government and identified in the contract; and

(2) For Contractor-acquired property, the cost derived from the Contractor’s records that reflect consistently applied, generally acceptable accounting principles.

b. Reporting loss of Government property.

(1) The Contractor shall use the Defense Contract Management Agency (DCMA) eTools software application for reporting loss of Government property. Reporting value shall be at unit acquisition cost. The eTools “LTDD of Government Property” toolset can be accessed from the DCMA home page External Web Access Management application at http://www.dcma.mil/aboutetools.cfm.

http://www.dcma.mil/aboutetools.cfm

PR: FD2060-16-70406 4

(2) Unless otherwise provided for in this contract, the requirements of paragraph (b)(1) of this clause do not apply to normal and reasonable inventory adjustments, i.e., losses of low-risk consumable material such as common hardware, as agreed to by the Contractor and the Government Property Administrator. Such losses are typically a product of normal process variation. The Contractor shall ensure that its property management system provides adequate management control measures, e.g., statistical process controls, as a means of managing such variation.

(3) The Contractor shall report losses of Government property outside normal process variation, e.g., losses due to Theft; Inadequate storage; Lack of physical security; or “Acts of God.”

(4) This reporting requirement does not change any liability provisions or other reporting requirements that may exist under this contract.

4.0 Technical Requirements

4.1 Period and Place of Performance

4.1.1 Contract/Order Period of Performance: The period of performance for the contract/order will end on the last day of the contract.

4.1.2 Place of Performance: On-site repairs shall be performed at the following locations: Dyess AFB, TX; Ellsworth AFB, SD; Robins AFB, GA.

4.2 Government Industry Exchange Program (GIDEP)

The contractor shall be or will become a member of the Government Industrial Database (GIDEP). If not a member of GIDEP, the contractor must register to become a member.

The Contractor shall be required to submit all appropriate data requirements to GIDEP as it is generated in accordance with the contract data requirements list (CDRL) of this contract. Part, component, material, equipment, or manufacturing process deficiencies (actual or potential) shall be reported to GIDEP. The contractor shall maintain a record of the status and disposition of all Alert/Safe Alert reports.

The contractor shall screen each Alert or Safe Alert received from GIDEP to determine if the device or process for which the Alert is issued, is used in the manufacture of the unit and take appropriate action. Upon determination that an Alert/Safe Alert has implications to the units being repaired, a response shall be submitted informing the specified organizations in accordance with CDRL. Subcontractors to the prime shall be notified of reports associated with the device, components or processes supplied by the subcontractor to the prime.

CDRL A003 (DI-QCIC-80125B, GIDEP Alert/Safe-Alert Report) CDRL A004 (DI-QCIC-80126B, GIDEP Alert Response)

4.3 Commercial Asset Visibility-Air Force (CAV-AF): The contractor shall report using the Commercial Asset Visibility (CAVAF). (CDRL A001, Data Item Description, DI-MGMT-

PR: FD2060-16-70406 5

81634C). The contractor shall provide data related to the tasks and efforts conducted for each repairable unit. If CAVAF training is required, send an email to:

406scms.cav.af.ar@robins.af.mil. The contractor shall conduct production reporting on a daily or as transactions occur basis. The contractor shall obtain a valid DoD PKI certificate to log into CAVAF. Each user shall be required to have an Identity Certificate only; an encryption certificate is not required.

CDRL A001 (DI-MGMT-81634C, Commercial Asset Visibility Air Force

(CAVAF)/Government Furnished Material Report)

5.0 General Information: The Contractor shall comply with the delivery performance requirements and other obligations as identified in this PWS. The following sections provide a summary of the principle responsibilities and duties of the contractor.

5.0.1 Program Management

The contractor shall identify to the government and maintain a single point of contact (Program Manager) for all matters under this contract. The contractor shall also ensure that all program management personnel assigned to the program shall be available, as required, to meet program objectives. The contractor shall schedule and coordinate the onsite visits as well as the duty hours that will be worked by the contractor’s technicians while onsite at each base location. The contractor shall provide a Contractor’s Progress, Status, and Management Report, outlining the progress of repair actions in 30 day increments beginning upon receipt of the government’s direction to proceed.

CDRL A009 (DI-MGMT-80227, Contractor’s Progress, Status, and

Management Report)

5.0.2 Onsite Repair

The contractor shall perform all tasks required for evaluation and repair of the DAAE test station to a serviceable and Fully Mission Capable (FMC) condition. These tasks include the testing, evaluation, and minor repair(s) of the test stations. Additionally, the removal and replacement of instruments, circuit card assemblies (CCAs), electronic component assemblies (ECAs), or major subassemblies, hereafter referred to as asset(s), or the manufacturing of cables, or a combination of both may be required to successfully complete the repair of the test station. Upon completion of all corrective actions, the contractor shall perform Operational Assurance/Fault Isolation (OAFI) test program to verify all deficiencies and/or failures within the DAAE test station have been identified and corrected/resolved if asset(s) are available. The contractor shall document the corrective actions taken and the results of the OAFI test program to verify serviceability and FMC status of the DAAE test station and provide this documentation as part of the Technical Report – Study/Services.

CDRL A002 (DI-MISC-80508B, Technical Report, Study/Services)

5.0.3 Test, Evaluation, and Minor Repair

The test, evaluation, and minor repair of each DAAE test station shall include but not be limited to the following:

mailto:406scms.cav.af.ar@robins.af.mil

PR: FD2060-16-70406 6

• Utilize the Intermediate Automatic Test Equipment (IATE) OAFI test program for the DAAE station and any necessary troubleshooting techniques to identify all deficiencies and/or failure(s) with the DAAE test station.

• Document the symptoms, tests and measurements, and troubleshooting techniques used to determine the condition of the DAAE test station and provide this documentation as part of the Technical Report.

• Implement minor repair actions to resolve the identified failure(s) o If removal and replacement of asset(s) are not required, the contractor shall implement any necessary minor repair actions, such as alignments or adjustments of the asset(s) or reseating of CCAs, cables, I/O pins, etc.

o If replacement asset(s) are required and available at the onsite location during the visit, the contractor shall perform the removal and replacement of the available asset(s).

• If replacement asset(s) are required and not available at the onsite location during the visit, the contractor shall notify the government of the required assets via the Technical Report. The contractor may utilize serviceable asset(s) from other DAAE stations at the onsite location to verify the failure of the identified faulty asset(s). The use of “cannibalized” asset(s) from other DAAE stations is based on operational priorities and requires government concurrence.

The contractor shall complete the test, evaluation, and minor repairs of the DAAE station within thirty (30) calendar days of the scheduled date identified by the contractor at the time a delivery order is placed. Repair activity shall be accomplished in accordance with applicable International Organization for Standardization (ISO) processes unless otherwise modified or directed by the Government PM.

5.0.4 Manufacturing

Based on the results of the test and evaluation, if the manufacturing and assembly of interconnect cables or other miscellaneous items (i.e. coaxial cables, ribbon cables, I/O pins, extender cards, attenuators, switches, etc.) are needed to facilitate the repair of the station, the contractor shall notify the government via the Technical Report. The manufacturing and assembly of cables required to facilitate the repair of the station and verification of Fully Mission Capable (FMC) status shall include interface cables physically external to the station that are a part of the Interface Test Adapter (ITA) for the Intermediate Automatic Test Equipment (IATE) and/or the DAAE as well as those internal to the DAAE station. Upon government approval/direction the contractor shall proceed with the manufacturing, assembly, and installation of the cables or other miscellaneous items.

5.1 Continuation of Mission-Essential Services during a Crisis: In accordance with DFARS 237.7602(a), Continuation of Essential Contractor Services, DFARS 252.237-7023(a)(2), and Air Force Instruction (AFI) 10-403, Deployment Planning and Execution, paragraph 1.9.1.33.2, the Functional Commander (FC) or civilian equivalent has determined these services are not mission-essential and will not continue in the event of a crisis.

PR: FD2060-16-70406 7

5.2 Security Requirements

5.2.1 General: Actual knowledge of, generation, or production of classified information is not required for performance of the contract. Cleared personnel are required to perform this service because security measures which are in force do not preclude access to classified information.

5.2.2 Operations Security (OPSEC): The purpose of OPSEC is to reduce the vulnerability of USAF missions to adversary collection and exploitation of critical information. The Contractor shall ensure compliance with DoDD 5205.02E, DoD Directive for Operations Security (OPSEC) and DoD Manual 5205.02-M, DoD Operations Security (OPSEC) Program Manual to protect United States (U.S.) Government interests.

The Contractor shall ensure Contractor personnel who perform work on a Government facility comply with the OPSEC procedures of the facility.

5.2.3 Employee Clearances: Contractor employees shall not be authorized access to classified information; access to classified materials, or permitted to perform work on classified projects without proper security clearances and a need to know. The contractor shall be responsible for obtaining security clearance to the level of Secret for proper accomplishment of contract requirements. Contractor employees whose clearance has been suspended or revoked shall immediately be denied access to classified information, sensitive but unclassified information and government computers.

Contractor inability to obtain and/or maintain proper employee security clearance shall not constitute an excusable delay in contract performance.

5.2.4 Security Regulations: The Contractor shall ensure personnel, information, systems, property, facility and international security requirements are met. The Contractor shall comply with all applicable security regulations.

5.2.5 Security Incidents and Violations: The contractor shall immediately notify the (AFLCMC/WNAEA) Security Office of any actual security violation, security incident, or of any indication of a potential unauthorized disclosure or compromise of classified or sensitive but unclassified information.

5.2.6 Security Education: All full time contractor employees occupying physical space on Robins Air Force Base, will comply with the AFLCMC/ WN-ATS Security Education and Awareness program. The program consist of the following components: initial training, annual refresher training, and periodic tailored training.

5.3 ENVIRONMENTAL MANAGEMENT SYSTEM (EMS):

Executive Order (E.O.) 13693, Planning for Federal Sustainability in the Next Decade, Sec3(i)(iv)B, requires implementation and/or continuance of an EMS. Contractor personnel who perform work on any USAF installation shall comply with the EMS requirements established by the installation.

All contractors who physically perform work on Robins Air Force Base (RAFB) must receive

PR: FD2060-16-70406 8

EMS General Awareness Training. All prime contractors must complete the training prior to beginning work on RAFB and must ensure that all subcontractors comply with this requirement.

78 CEG/CEV has already developed EMS training and it’s a requirement for military and civilians working on Robins. The policy letter made it mandatory for contractors working on Robins to complete EMS Training.

There are three ways contractors can complete EMS training:

• With CAC, go to 78 CEG/CEV website and click on EMS General Awareness Training, choose Option 1 https://geobase.robins.af.mil/emstraining/EMSTrainingOptions.aspx

• Without a CAC, request a copy of EMS training from 78 CEG/CEV Workflow Mailbox.

• If a company is ISO 14000 certified, the contractor does not have to complete Robins AFB EMS General Awareness Training; however, the contractor must submit documentation to the Contracting Officer (CO) stating ISO 14000 Certification.

5.3.1 The prime contractor shall ensure subcontractors comply with the EMS requirement.

5.4 Agency Affirmative Procurement Programs (Formerly Green Procurement Programs (GPP)): In accordance with FAR 23.404, Agency Affirmative Procurement Programs, 100% of purchases of Environmental Protection Agency (EPA)-designated products included in the Comprehensive Procurement Guidelines (CPG) list [http://www.epa.gov/cpg/products.htm] and/or United States Department of Agriculture (USDA)-designated products included in the biobased product listings [http://www.biopreferred.gov] shall, at a minimum, meet the EPA or USDA standards for recovered materials or biobased content, respectively, unless an item cannot be acquired competitively within a realistic timeframe, meet appropriate performance standards, and/or be acquired at a reasonable price.

5.5 SAFETY REQUIREMENTS: The contractor shall comply 100 percent of the time.

5.5.1 Contractor Compliance. Contractors shall comply with Occupational Safety and Health Act (OSHA) Public Law 91-596, and OSHA Standard 29 CFR 1910 for the protection of their employees. To ensure the protection of Air Force personnel, assets and interests, the contractor shall be solely responsible for compliance with all federal, state and local laws, codes, ordinances, regulations, the Occupational, Safety and Health Act (Public Law 91-596) and the resulting OSHA Standards 29 CFR 1910, all Air Force Occupational Safety and Health (AFOSH) Standards, and any applicable local guidance.

The contractor shall establish and maintain a safety and health program detailed in a written Contractor’s Safety and Health Plan. The Air Force is part of the OSHA Voluntary Protection Program (VPP). All shall familiarize themselves with the requirements of VPP. Information on the VPP can be accessed at http://www.osha.gov/dcsp/vpp/index.html. Additionally, the contractor is responsible for the safety and health of all subcontractor employees.

https://geobase.robins.af.mil/emstraining/EMSTrainingOptions.aspx http://www.epa.gov/cpg/products.htm http://www.biopreferred.gov/ http://www.osha.gov/dcsp/vpp/index.html.

PR: FD2060-16-70406 9

5.5.2 Mishap Notification: No more than two Class C mishaps per contract year. Zero Class A or B mishaps will be tolerated. In accordance with AFI 91-204, Safety Investigations and Reports, paragraph 2.4.6.1.1, the Contractor shall report mishaps involving damage or injury to USAF interests The contractor shall telephonically notify the Safety office within four (4) hours of all mishaps or incidents. No more than one instance of late mishap notification per contract year is acceptable. Follow all other reporting requirements as identified on the DD1423, CDRL A005 for Accident/Incident Report (Mishap Notification & Reporting) Data Acquisition Document Number DI-

SAFT-81563.

CDRL A005 (DI-SAFT-81563, Accident/Incident Report)

5.5.3 Mishap Investigation. If requested by the Government Procuring Contracting Officer (PCO) or Administrative Contracting Officer (ACO), the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenances and training records until released by the investigating safety office. If the government investigates the mishap, the contractor and the subcontractors shall cooperate fully and assist the government personnel until the investigation is completed.

5.5.4 Contractor Safety Program. The contractor shall establish and maintain an acceptable safety program in accordance with their accepted Safety and Health Plan.

All changes to the plan must also be submitted in writing and approved by the government via the DD 1423 Data Item Number A006 Data Acquisition Document Number DI-ENVR-81840 for Contractor’s Standard Operating Procedures (SOP) to receive the Contractor’s Safety and Health Plan Update.

CDRL A006 DI-ENVR-81840 Programmatic Environmental Safety and Health Evaluation (PESHE) Plan

5.5.5 Total Case Injury Rate (TCIR) and Days Away, Restricted and/or Transferred (DART) Rates. The contractor shall provide to the government, on an annual basis, TCIR/DART rates or injury and illness rates for the Standard Industrial Classification (SIC) code or the North American Industrial Classification Systems (NAICS) code for the applicable industry. These rates shall be provided to the addressee(s) listed in block 14.a. of the DD1423 Data Item Number A007 Data Acquisition Document Number DI-MGMT-80227 for Contractor’s Progress, Status and Management Report (Annual TCIR/DART Rates).

CDRL A007 (DI-MGMT-80227, Contractor’s Progress Status and Management

Report (Annual TCIR/DART Rates))

5.5.6 Contract Safety Manager. As part of the Contractor Safety Program, the contractor shall assign in their plan, by name and phone number, a person who shall be the primary point of contact for safety and health issues for the on-site operation. The contractor shall keep the contract safety manager information current by notifying the contracting officer of any change in personnel or contact information.

PR: FD2060-16-70406 10

5.5.7 Quality Control Plan (QCP). The contractor’s QCP is the foundation upon which quality work is based. The QCP is submitted after award in accordance with DD1423 Data Item Number A008, Data Acquisition Document Number DI-QCIC-81722, Contractor’s Progress Status & Management Report (Contractor’s Quality Control Plan) and is approved by the Contracting Officer Representative (COR) before any work begins. The plan shall be comprehensive, detailed, and logical if the contractor’s quality control program is to be effective and shall include a site safety checklist when applicable. The plan shall demonstrate that the contractor has fully considered the specific contract requirements and special factors peculiar to the project. The Government reserves the right to require necessary changes in the plan and in contractor operations to obtain the specified level of quality. If changes to the plan are necessary, the changes must be made and accepted by the Contracting Officer, prior to their implementation.

CDRL A008 (DI-QCIC-81722, Quality Program Plan)

5.5.8 Inspection of Services: In accordance with the Inspection of Supply/Services clause(s) identified in the contract/order, the Government reserves the right to inspect Contractor performance.

5.6 Trafficking in Persons: The Contractor shall comply with FAR 52.222-50, Combating Trafficking in Persons. Additional information about Trafficking in Persons is available at the site for the Department of State’s Office to Monitor and Combat Trafficking in Persons. http://www.state.gov/j/tip

5.7 Contractor Manpower Reporting

5.7.1 United States Code title 10, Section 2330a (10 USC 2330a) requires an annual inventory of contracts for services performed during the fiscal year including the number of Contractor employees.

5.7.2 In accordance with the Secretary of the Air Force for Acquisition (SAF/AQ) Memorandum, Implementation of FY11 NDAA [National Defense Authorization Act] Section 8108 [of Public Law 112-10 of the Department of Defense and Full-Year Continuing Appropriations Act, 2011], Contractor Inventory, dated Nov 13 2012, the Contractor shall provide an annual count of contractor/subcontractor personnel performing work for each fiscal year if the DoD is the requiring activity, if the acquisition is using U.S. Government appropriated funds, and if the acquisition is equal to or greater than the Simplified Acquisition Threshold (SAT) [currently $150,000.00].

https://cs.eis.af.mil/airforcecontracting/knowledge_center/Documents/AFFARS_Library/533 7/2012-11-13_saf-aq-memo.pdf

5.7.3 In accordance with the Office of the Secretary of Defense (OSD) Memorandum, Enterprise-wide Contractor Manpower Reporting Application, dated Nov 28 2012, the Contractor shall report all Contractor labor hours, including subcontractor labor hours, required for performance of the services provided under the contract at the Enterprise-wide http://www.state.gov/j/tip https://cs.eis.af.mil/airforcecontracting/knowledge_center/Documents/AFFARS_Library/5337/2012-11-13_saf-aq-memo.pdf https://cs.eis.af.mil/airforcecontracting/knowledge_center/Documents/AFFARS_Library/5337/2012-11-13_saf-aq-memo.pdf

PR: FD2060-16-70406 11

Contractor Manpower Reporting Application (eCMRA) site. Reporting shall be conducted for each fiscal year, which extends October 1 through September 30. While inputs may be made any time during the fiscal year, all data shall be reported no later than October 31 of the following fiscal year.

[http://www.acq.osd.mil/dpap/policy/policyvault/Enterprise-wide_Contractor_Manpower_Reporting_Application_memorandum.pdf],

5.7.4 In accordance with the Contractor Manpower Reporting / Contractor Quick Reference Guide, the Contractor shall establish a record for the contract/order in the Enterprise-wide Contractor Manpower Reporting Application (eCMRA) no later than 30 calendar days after contract/order award. In accordance with the Contractor Manpower Reporting / Contractor Quick Reference Guide and the Contractor Manpower Reporting / Contractor User Guide, the Contractor shall enter Order Data, Contact Data and Location Data.

http://www.acq.osd.mil/dpap/policy/policyvault/Enterprise-wide_Contractor_Manpower_Reporting_Application_memorandum.pdf http://www.acq.osd.mil/dpap/policy/policyvault/Enterprise-wide_Contractor_Manpower_Reporting_Application_memorandum.pdf

PR: FD2060-16-70406 12

6.0 APPENDICES

6.1 Appendix A: References

TECHNICAL ORDERS

Name of Publication Sections that Apply

Date of Publication and

Changes

Title of Publication

T.O. 33D7-13-100-1

Entire

Change 5 1 Aug 2004

OPERATION AND

MAINTENANCE

INSTRUCTIONS,

INTERMEDIATE LEVEL TEST

SET GROUP,

COUNTERMEASURES

(DIGITAL DAAE STATION)

T.O. 33D7-13-100-4

Change 4

15 Jan 2007

ILLUSTRATED PARTS

BREAKDOWN,

TEST SET GROUP,

(DIGITAL DAAE STATION)

T.O. 33D7-13-99-1

Change 2 15 Jan 2004

OPERATION AND

MAINTENANCE

INSTRUCTIONS,

INTERMEDIATE LEVEL

TEST SET GROUP,

(RF DAAE STATION)

T.O. 33D7-13-99-4

Change 3

17 Mar 2010

ILLUSTRATED PARTS

BREAKDOWN,

TEST SET GROUP,

(RF DAAE STATION)

T.O. 33D7-44-251-8-1

Change 5

29 Mar 2005

OPERATOR TEST

PROCEDURES,

RADAR/ELECTRONIC

WARFARE (REW)

TEST STATION

T.O. 33D7-44-251-1

Change 9 7 Apr 2009

OPERATION AND

MAINTENANCE

INSTRUCTIONS,

INTERMEDIATE

MAINTENANCE,

RADAR/ELECTRONIC

WARFARE (REW)

TEST STATION

PR: FD2060-16-70406 13

T.O. 33D7-3-256-1

Change 6 12 July 2007

OPERATION AND

MAINTENANCE

INSTRUCTIONS,

INTERMEDIATE

MAINTENANCE,

DIGITAL (DIG) TEST STATION

T.O. 33D7-3-256-8-1

Entire Change 6

24 Mar 2008

OPERATOR TEST

PROCEDURES,

DIGITAL (DIG) TEST STATION

Name of Publication Sections that Date of

Publication Title of Publication Apply

MIL-STD-129P

With Change 4 Entire 19 Sep 07 Military Marking for Shipment and Storage

MIL-STD-130 Entire 17 Dec 07 DoD Standard Practice Identification Marking of US Military Property

DFARS 252.211–7003 Entire Jun 2011 Item Identification and Valuation

MIL-STD-2073-1d Entire 10 May 02 Standard Practice for Military Packaging

DLAR 4155.24 Entire 20 Jul 93 Product Quality Deficiency Report Program

DFARS 237.76 Entire 24 Nov 10 Continuation of Essential Contractor Services

FAR 23.404 Para graph “b” 1 Oct 10 Agency Affirmative Procurement Program

OSHA Public Law 91-596 Entire 1 Jan 04 Occupational Safety and Health Act (OSHA) of

Occupational Safety And Health Standards Part 1910 1 Jan 04 Occupational Safety and Health Act (OSHA) of

DoD 4100.39-M Entire May 2010 Federal Logistics Information System

FAR 52.245-1 Entire Aug 2010 Government Property

AFJMAN 23-215

(for misidentified or misdirected items)

Section 5.

Para. E.

6 Aug 01

Reporting of Supply Discrepancies

T.O. 00-35D-54 (for Product Quality Deficiency Report (PQDRs))

Document

1 May 07

USAF Deficiency Reporting, Investigation, and Resolution

DLAR 4155.24

(for Product Quality Deficiency Report (PQDRs))

20 Jul 93

Product Quality Deficiency Report Program

AFMCI 21-113

(use for FAST repair effort)

Section 5

4 Mar 09 Fast Transportation

DOD 5220.22-M

(for CLASSIFIED only) Entire 28 Feb 06 National Industrial Security Program Operating

Manual (NISPOM).

FAR 52.246-4 Entire Aug 1996 Inspection of Services-Fixed Price

FAR 52.246-6 Entire May 2001 Inspection--Time-And-Material and Labor-Hour