FA852619Q0025.pdf

PDF 308 KB Posted

Attached to
Tool Kit, Main Landing Gear Federal contract opportunity
Solicitation number
FA852619Q0025
Issued by
Department of the Air Force Materiel Command Lifecycle Management Center Robins Air Force Base

About this file

Solicitation FA852619Q0025

View the file

Other files for this federal contract opportunity

Other files attached to Tool Kit, Main Landing Gear, newest first.
File Type Posted
TRANS1423.pdf PDF
EDL.pdf PDF
CDRLA001.pdf PDF
CDRLA002.pdf PDF
IUID_CDRL.pdf PDF
FORM_158.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STANDARD FORM 1447 (2/2012)

Prescribed by GSA FAR (48 CFR) 53.215-1(d)

4. SOLICITATION NUMBER

FA8526-19-Q-0025

X

6.SOLICITATION ISSUE DATE

8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOSB PROGRAM

HUBZONE SMALL

BUSINESS EDWOSB

SERVICE-DISABLED VETERAN-

OWNED SMALL BUSINESS NAICS CODE: 336413

8(A) Non Competitive SIZE STANDARD: 1250

DATE SIGNED

28. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION NUMBER

SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES WHICH

ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

ROUTINE

RESTRICTED UNDER THE PROVISIONS OF SECTION 8(a) OF THE SMALL BUSINESS

ACT

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 90 days.

SEE LINE ITEM SCHEDULE

22.

AMOUNT

16. AUTHORITY FOR USING OTHER THAN 10 USC 2304 41 USC 253

FULL AND OPEN COMPETITION (c) (5 ) (c) ( )

DATE SIGNED

27. SIGNATURE OF OFFEROR/CONTRACTOR

20.

UNIT

21.

UNIT PRICE

19.

QUANTITY

13. CONTRACTOR OFFEROR CODE FACILITY CODE

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN * ___ CALENDAR DAYS (60 CALENDAR

DAYS UNLESS OFFEROR INSERTS A DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLK 9

ABOVE, THE CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE ITEMS

SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT SUBJECT TO THE TERMS AND

CONDITIONS STATED HEREIN. *90

RATING

DO: A1

3. AWARD/EFFECTIVE DATE

FA8526

2. CONTRACT NO.

CHECK IF REMITTANCE IS DIFFERENT

AND PUT SUCH ADDRESS IN OFFER

17.

ITEM NO.

12. ADMINISTERED BY CODE

Total

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK: 14 EFT:T

SCD:B

NAME AND TITLE OF SIGNER (TYPE OR PRINT) NAME OF CONTRACTING OFFICER

24. AWARD AMOUNT (FOR GOVT USE ONLY)

23. ACCOUNTING AND APPROPRIATION DATA

SEE SCHEDULE

5. SOLICITATION TYPE

SEALED BIDS NEGOTIATED

(IFB) (RFP)

15. PROMPT PAY DISCOUNT

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SETFORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT

THE TERMS AND CONDITIONS SPECIFIED HEREIN.

10. ITEMS TO BE PURCHASED (BRIEF DESCRIPTION)

SUPPLIES SERVICES Other Aircraft Part and Auxiliary Equipment Manufacturing

9.

25-FEB-2019

X

18.

SCHEDULE OF SUPPLIES/SERVICES

14. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232-7003.)

X

7. ISSUED BY CODE

GLOBEMASTER (C-17), AFLCMC/WLMK

235 BYRON ST STE 19A

BLDG 300 CML PHN 478 327 7137

ROBINS AFB GA 31098-1670

BUYER: Donna H. Casey/WLNKA donna.casey.3@us.af.mil Phone: (478) 926- 1922 No Collect Calls

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE BLOCKS 11, 13, 15, 21, 22, & 27.

J

SF 1447 (rev 2/2012) BACK

NO RESPONSE FOR THE REASONS CHECKED

TYPE OR PRINT NAME AND TITLE OF SIGNER

SIGNATURENAME AND ADDRESS OF FIRM (Include Zip Code)

WE DO NOT DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF

ITEMS INVOLVED

WE DO

OTHER (Specify)

CANNOT COMPLY WITH SPECIFICATIONS

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

FOLD

FOLD

FOLD

FOLD

SOLICITATION NO. FA852619Q0025

DUE: 25 FEB 2019

FROM: AFFIX

STAMP

HERE

TO:

ATTN: Donna H Casey/WLNKA

GLOBEMASTER (C-17), AFLCMC/WLMK

235 BYRON ST STE 19A

BLDG 300 CML PHN 478 327 7137

ROBINS AFB GA 31098-1670

FA8526-19-Q-0025

SUPPLIES OR SERVICES AND PRICES/COSTS

ELECTRONIC RESPONSES ARE AUTHORIZED (MAR 2003)

(IAW FAR 13.003(f))

In accordance with FAR 13.003(f); 14.202-8 or 15.203(c), electronic commerce method to receive proposals, modifications, and revisions is permitted and preferred. Buyer and Contracting Officer's email addresses for submissions are listed on the front page of this document.

Fill – In Below:

Note: An option is considered to have been exercised at the time the Government deposits written notification to the Contractor via mail or other electronic means of notification. In the event of overlapping deliveries due to exercise of option, the Contractor shall not be required to deliver more than _2__ EA (or applicable qty/unit and item number or Noun) in any 30 day period.

Offeror Note: For First Article Wavier Information see “First Article Applicability and/or Conditions for Wavier”. Bid A is for offerors who are required to produce the first article; Bid B is for offerors who are exempt from production of "First Article”.

FIRST ARTICLE/PRODUCTION

Bid A - First Article Required Item No.

NSN: 5180-01-503-5185 BA

TOOL KIT, MAIN LANDING GEAR

Manufacturer Part Number 882777 17G130071-501 Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Buy American Act/Balance of Payments Program Class I ODS Substance Application/Use Quantity

NONE

FIRST ARTICLE

Bid A - First Article Required Item No.

0001AA

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

FA

First Article

FIRST ARTICLE

Associated Document(s) Line Item(s)

FD20601831692 0002

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2008 2008

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A EB2090 ORIGIN

Class I ODS Substance Application/Use Quantity

NONE

None Type / Ship To PACRN Mark For A EB2090 PAA R. Nation Type / Ship To Quantity (U/I) *ARO Contract

(On or Before) _ Req No / Pri

Required Delivery

A EB2090 1 EA *330 Calendar Days

Proposed Delivery

A EB2090 1 EA

Accelerated delivery is acceptable.

PRODUCTION

Bid A ‐ First Article Required Item No.

0001AB

Firm Fixed Price Quantity U/I Unit Price Amount

1 EA

PRODUCTION

Bid A ‐ First Article Required

NSN: 5180‐01‐503‐5185 BA

TOOL KIT, MAIN LANDING GEAR

Manufacturer Part Number 88277 17G130071‐501 Associated Document(s) Line Item(s)

FD20601831692 0001

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001‐2008 2008

Buy American Act/Balance of Payments Program

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A EB2090 ORIGIN

Class I ODS Substance Application/Use Quantity

NONE

Type / Ship To PACRN Mark For A EB2090 PAA R. Nation Type / Ship To Quantity (U/I) *ARO Approval of

First Article (On or Before)

_ Req No / Pri

Required Delivery

A EB2090 1 EA *120 Calendar Days

Proposed Delivery

A EB2090 1 EA

Accelerated delivery is acceptable.

DATA

Item No.

DATA

DATA

DATA

Priority: R ROUTINE Exhibit: A

DATA

Bid A ‐ First Article Required Item No.

0002AA

Firm Fixed Price Quantity U/I Unit Price Amount

1 LO

FATP

First Article Test Plan

TEST PLAN IN ACCORDANCE WITH ATTACHED DD FORM 1423

Associated Document(s) Line Item(s)

FD20601831692 0003

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001‐2008 2008

Type / Ship To PACRN Mark For I FA8526 AFLCMC/WLE, C‐17 PSE Engineering Type / Ship To Quantity (U/I) *ARO Contract (On or Before) _ Req No / Pri

Required Delivery

I FA8526 1 LO *60 Calendar Days

Proposed Delivery

I FA8526 1 LO

Accelerated delivery is acceptable.

DATA

Bid A ‐ First Article Required Item No.

0002AB

Firm Fixed Price

DATA

Bid A ‐ First Article Required Quantity U/I Unit Price Amount

1 LO

FATR

First Article Test Report

TEST REPORT IN ACCORDANCE WITH ATTACHED DD FORM 1423

Associated Document(s) Line Item(s)

FD20601831692 0004

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Exhibit: A Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001‐2008 2008

Type / Ship To PACRN Mark For I FA8526 AFLCMC/WLE, C‐17 PSE Engineering Type / Ship To Quantity (U/I) *ARO Contract (On or Before) _ Req No / Pri

Required Delivery

I FA8526 1 LO *240 Calendar Days

Proposed Delivery

I FA8526 1 LO

Accelerated delivery is acceptable.

PRODUCTION (NO FIRST ARTICLE)

Bid B ‐ First Article NOT Required Item No.

Firm Fixed Price Quantity U/I Unit Price Amount

2 EA

NSN: 5180‐01‐503‐5185 BA

TOOLKIT, MAIN LANDING GEAR

SDN:

Manufacturer Part Number 88277 17G130071‐501 Associated Document(s) Line Item(s)

FD20601831692 0001

PRODUCTION (NO FIRST ARTICLE)

Bid B ‐ First Article NOT Required

FD20601831692 0002

Priority: R ROUTINE

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001‐2008 2008

Buy American Act/Balance of Payments Program

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

A EB2090 ORIGIN

Class I ODS Substance Application/Use Quantity

NONE

Type / Ship To PACRN Mark For A EB2090 PAA R. Nation Type / Ship To Quantity (U/I) *ARO Contract (On or Before) _ Req No / Pri

Required Delivery

A EB2090 2 EA *120 Calendar Days

Proposed Delivery

A EB2090 2 EA

Accelerated delivery is acceptable.

DATA

Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

DATA

IUID CDRL

IUID CDRL with attachment IUID CDRL FORM 1423 Associated Document(s) Line Item(s)

FD20601831732 0001

Exhibit: AC

Option I can be exercised from time to time for a period of 365 days after award or after approval of First Article whichever is later, not to exceed a quantity of 2 ea. Multiple option periods may be exercsed simutaneously. An option is determine to have been exercised when transmitted electronically by fax or email. Sub-line items may be establised at the time of option exercise.

Option Year I

Item No.

Firm Fixed Price From Quantity U/I To Quantity U/I Unit Price

1 EA 2 EA

NSN: 5180‐01‐503‐5185 BA

MAIN LANDING GEAR TOOLKIT

SDN:

Manufacturer Part Number 88277 17G130071‐501

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001‐2008 2008

Buy American Act/Balance of Payments Program Class I ODS Substance Application/Use Quantity

NONE

Type / Ship To PACRN Mark For

+ TBD PAA

Type / Ship To Quantity (U/I) *ARO Notice to

Exercise Option _ Req No / Pri

Required Delivery

+ TBD 1 EA

*100 Calendar Days

Proposed Delivery

+ TBD 1 EA

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: + TBD

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: A EB2090

BOEING ICP C17 PRGM EB2090

BLDG DR 20 CP 404 363 0257

5690 SOUTHFIELD CT STE 200

FOREST PARK GA 30297‐2524

USA

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: I FA8526

GLOBEMASTER (C‐17)

AFLCMC/WLE, PSE Engineering

235 BYRON ST STE 19A

BLDG 300 CML PHN 478 327 7137

ROBINS AFB GA 31098‐1670

UNITED STATES

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

CONTRACT CLAUSES

5352.201-9101 OMBUDSMAN (JUN 2016)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Timothy R.

Inman at 478 222 ‐4097 , FAX 000 000 ‐0000 , email timothy.inman@us.af.mil . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330‐1060, phone number (571) 256‐2395, facsimile number (571) 256‐2431.

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS (JAN 2017)

(IAW FAR 3.909-3 (b))

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (OCT 2018)

(IAW FAR 4.1403(a))

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

(IAW FAR 4.1105(b))

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016)

(IAW FAR 4.1804(c), FAR 12.301(d))

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS

(JUN 2016)

(IAW FAR 4.1903)

52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES

DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED

ENTITIES (JUL 2018)

(IAW FAR 4.2004)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (OCT 2016)

(IAW DFARS 204.7304(c))

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (MAY 2016)

(IAW DFARS 204.7403(c), DFARS 212.301(f)(ix))

52.209-3 FIRST ARTICLE APPROVAL--CONTRACTOR TESTING (SEP 1989)

(IAW FAR 9.308-1(a)(1), FAR 9.308-1(b)(1))

(a) The Contractor shall test ** unit(s) of Lot/Item * as specified in this contract. At least *** calendar days before the beginning of first article tests, the Contractor shall notify the Contracting Officer, in writing, of the time and location of the testing so that the Government may witness the tests.

*Lot/Item ***Calendar Days Before Test **Quantity

0001 30 1

(b) The Contractor shall submit the first article test report within ___**___ calendar days from the date of this contract to ___***___ marked "FIRST ARTICLE TEST REPORT: Contract No. Lot/Item No. ___*___” Within ___****___ calendar days after the Government receives the test report, the Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the Contractor. A notice of disapproval shall cite reasons for the disapproval.

*Lot/Item ****Approval Days ELIN No.

0001 60 A002

FA Test Report Item ***Type/Location **Calendar Days

0002AB IFA8526 240

52.209-3 FIRST ARTICLE APPROVAL--CONTRACTOR TESTING -- ALTERNATE I (JAN 1997)

(IAW FAR 9.308-1(a)(2), FAR 9.308-1(b)(2))

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

(IAW FAR 9.108-5(b))

FIRST ARTICLE TEST, CERTIFICATION AND DISPOSITION REQUIREMENTS

(FEB 1998)

(IAW FAR 9.308-2)

Test criteria are as follows:

Lot/Item Government Test/Inspection Requirements

Lot/Item Contractor Test/Inspection Requirements 0001 (See Below)

Contractor Testing Requirements

A. Performance or other characteristics which the First Articles must meet are Dimensional Conformance, Material and Process Verification, Workmanship

B. The TDP including drawing 17G130077 Rev W, PL, NL The FATP shall be submitted NLT 60 DAC The FATR shall be submitted NLT 240 DAC

Disposition of the First Article shall be as follows:

Lot/Item Approved 0001 Forwarded to: EB2090

Lot/Item Disapproved 0001 Returned to the contractor

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

52.211-8 TIME OF DELIVERY (JUN 1997)

(IAW FAR 11.404(a)(2)) DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE ITEM.

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b))

This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

52.213-4 TERMS AND CONDITIONS--SIMPLIFIED ACQUISITIONS (OTHER THAN

COMMERCIAL ITEMS) (OCT 2018)

(IAW FAR 13.302-5(d))

The full text of a clause may be accessed electronically at this/these address(es): Regulations URLs: (Click on the appropriate regulation.)

http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/far1toc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/dfars/dfartoc.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/af_afmc/affars/affar1toc.htm

NOTE: After selecting the appropriate regulation above, at the "Table of Contents" page conduct a search for the desired regulation reference, using your browser's FIND function. When located, click on the regulation reference (hyperlink).

(Paragraph (b)(1)(xvi), FAR 52.225‐1, Buy American Act‐‐Supplies (May 2014), is superseded by DFARS clause 252.225‐7001, Buy American and Balance of Payments Program, per DFARS 225.1101(2)(i) and therefore not applicable to DoD)

52.217-7 OPTION FOR INCREASED QUANTITY--SEPARATELY PRICED LINE ITEM

(MAR 1989)

(IAW FAR 17.208(e))

The Contracting Officer may exercise the option by written notice to the Contractor within SEE SCHEDULE .

52.219-14 LIMITATIONS ON SUBCONTRACTING (DEVIATION 2019-O0003) (DEC 2018)

(IAW FAR 19.508(e), FAR 19.811-3(e))

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(IAW FAR 19.309(c))

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code _____________ assigned to contract number ______________________________.

[Contractor to sign and date and insert authorized signer's name and title].

252.219-7009 SECTION 8(a) DIRECT AWARD (OCT 2018)

(IAW DFARS 219.811-3(1))

(a) The cognizant SBA district office is:

SB1084

ALASKA DISTRICT OFFICE

420 L STREET, SUITE 300

ANCHORAGE , AK 99501 ‐

www.sba.gov/ak/index.html

252.219-7011 NOTIFICATION TO DELAY PERFORMANCE (JUN 1998)

(IAW DFARS 219.811-3(3))

52.223-11 OZONE-DEPLETING SUBSTANCES AND HIGH GLOBAL WARMING POTENTIAL

HYDROFLUOROCARBONS (JUN 2016)

(IAW FAR 23.804(a)(1))

(b) The Contractor shall label products which contain or are manufactured with ozone‐depleting substances in the manner and to the extent required by 42 U.S.C. 7671j(b), (c), (d), and (e) and 40 CFR Part 82, Subpart E, as follows:

WARNING

Contains (or manufactured with, if applicable) ________________________*, a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.

* The Contractor shall insert the name of the substance(s).

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (AUG 2011)

(IAW FAR 23.1105)

52.223-20 AEROSOLS (JUN 2016)

(IAW FAR 23.804(a)(3))

52.223-21 FOAMS (JUN 2016)

(IAW FAR 23.804(a)(4))

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)

(IAW DFARS 223.7306, DFARS 212.301(f)(xxi))

5352.223-9000 ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODSs)

(NOV 2012)

(IAW AFFARS 5323.804-90)

52.224-3 PRIVACY TRAINING (JAN 2017)

(IAW FAR 24.302(a))

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM--BASIC (DEC 2017)

(IAW DFARS 225.1101(2)(i) and (2)(ii))

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (DEC 2017)

(IAW DFARS 225.1101(3))

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)

(IAW DFARS 225.7901-4)

52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014)

(IAW FAR 32.806(a)(1))

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)

(IAW FAR 32.706-3)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS

SUBCONTRACTORS (DEC 2013)

(IAW FAR 32.009-2)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(DEC 2018)

(IAW DFARS 232.7004(a))

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e‐mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .

(c) The Contractor may submit a payment request and receiving report using other than WAWF only when—

(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF;

(2) DoD is unable to receive a payment request or provide acceptance in electronic form;

(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer’s determination with each request for payment; or

(4) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD‐approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System).

(d) The Contractor shall submit any non‐electronic payment requests using the method or methods specified in Section G of the contract.

(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(f)WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand‐alone) and “Receiving Report” (stand‐alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC

Issue By DoDAAC

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back‐up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5)WAWF email notifications. The Contractor shall enter the e‐mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g)WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866‐618‐5988.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)

(IAW DFARS 232.7102)

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c))

52.243-1 CHANGES--FIXED-PRICE (AUG 1987)

(IAW FAR 43.205(a)(1))

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991)

(IAW DFARS 243.205-70)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013)

(IAW DFARS 244.403)

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(IAW FAR 46.311, DFARS 246.202-4(1))

(a) The Contractor shall comply with the higher‐level quality standard(s) listed below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring

*See Individual Line Item Schedule

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL‐IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

Government Contract Quality Assurance Inspection and Acceptance will be at destination(s) specified herein (Final).

Item No(s): 0002AA, 0002AB

52.247-1 COMMERCIAL BILL OF LADING NOTATIONS (FEB 2006)

(IAW FAR 47.104-4(a), FAR 47.104-4(b))

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c))

52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS (JAN 1991)

(IAW FAR 47.303-17(f))

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA--BASIC (APR 2014)

(IAW DFARS 247.574(b))

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b))

Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address

[CONTRACTOR FILL‐IN]

F.O.B. ORIGIN, FIRST DESTINATION TRANSPORTATION (NOV 2007)

(c) The Accounting Classification Reference Number (ACRN) that funds the acquisition of the Contract Line Item Number (CLIN)/SubCLIN must be used to pay for its transportation on the CLINs/SubCLINs listed below. The Miscellaneous Obligation Reimbursement Document (MORD) Number associated with the long line of accounting (LOA) shall be entered into Power Track to fund the transportation charges needed to transport the item.

CLIN/SubCLIN Long Line of Accounting (LOA) MORD Number/MORD ACRN

0001AA

0001AB

5773010 117 LCWT 13C017 4G944B 80401 41130F 503000 F03000

CSN:PSE0IW FSR:039501 PSR:069010 DSR:082418

F4FDAM8018NP02

Tac Code: FKVL

LIST OF DOCUMENTS, EXHIBITS OR ATTACHMENTS

Form Number Description/File Name Date Number of Pages

1423‐1 IUID_CDRL ‐ 02 12MAY2018 3

158 FORM_158 29MAY2018 2

1653 TRANS 1423 29MAY2018 3

EDL 18MAY2018 4

1423‐1 CDRLA001 27MAR2018 2

1423‐1 CDRLA002 27MAR2018 2

SOLICITATION PROVISIONS

REPRESENTATIONS, INSTRUCTIONS AND EVALUATIONS

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(NOV 2011)

(IAW DFARS 203.171-4(b), DFARS 212.301(f)(iv))

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018)

(IAW FAR 4.1105(a)(1))

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2018)

(IAW FAR 4.1202(a))

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 336413 .

(2) The small business size standard is 1250 .

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204‐7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

((2) If the provision at 52.204–7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

[ ] (i) Paragraph (d) applies.

[ ] (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203‐2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm‐fixed‐price contract or fixed‐price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two‐step sealed bidding procedures;

or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203‐11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.

This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203‐18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements—Representation. This provision applies to all solicitations.

(iv) 52.204‐3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204‐7, System for Award Management.

(v) 52.204‐5, Women‐Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.209‐2, Prohibition on Contracting with Inverted Domestic Corporations—Representation.

(vii) 52.209‐5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(viii) 52.209‐11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(ix) 52.214‐14, Place of Performance‐‐Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(x) 52.215‐6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xi) 52.219‐1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(xii) 52.219‐2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xiii) 52.222‐22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222‐26, Equal Opportunity.

(xiv) 52.222‐25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222‐26, Equal Opportunity.

(xv) 52.222‐38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xvi) 52.223‐1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA‐designated items; or include the clause at (xvii) 52.223‐2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xviii) 52.223‐4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA‐ designated items.

(xviv) 52.223‐22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals—Representation. This provision applies to solicitations that include the clause at 52.204‐7

(xx) 52.225‐2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225‐1.

(xxi) 52.225‐4, Buy American‐‐Free Trade Agreements‐‐Israeli Trade Act Certificate. (Basic, Alternate I, II, and III) This provision applies to solicitations containing the clause at 52.225‐ 3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $77,533, the provision with its Alternate II applies.

(D) If the acquisition value is $77,533 or more but its less than $100,000, the provision with its Alternate III applies.

(xxii) 52.225‐6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225‐5.

(xxiii) 52.225‐20, Prohibition on Conducting Restricted Business Operations in Sudan‐‐Certification. This provision applies to all solicitations.

(xxiv) 52.225‐25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transaction Relating to Iran—Representation and Certifications. This provision applies to all solicitations.

(xxv) 52.226‐2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.]

X __ (i) 52.204‐17, Ownership or Control of Offeror.

X __ (ii) 52.204‐20, Predecessor of Offeror.

X __ (iii) 52.222‐18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(see note) (iv) 52.222‐48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment ‐‐ Certification. ). (Note: If this clause is applicable it will be listed in the appropriate clause section of this document.)

__ (v) 52.222‐52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services‐‐Certification.

(see note) (vi) 52.223‐9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA‐Designated Products (Alternate I only). (Note: If this clause and it’s Alternate I are applicable they will be listed in the appropriate clause section of this document.)

(vii) 52.227‐6, Royalty Information.

__(A) Basic.

__ (B) Alternate I.

__(viii) 52.227‐15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The Offeror has completed the annual representations and certifications electronically in SAMaccessed through https://www.sam.gov. After reviewing the SAM information, the Offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date].

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause # Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016)

(IAW FAR 4.1804(a), FAR 12.301(d))

52.204-22 ALTERNATIVE LINE ITEM PROPOSAL (JAN 2017)

(IAW FAR 4.1008)

252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEC 2018)

(IAW DFARS 204.1202)

Substitute the following paragraphs (d) and (e) for paragraph (d) of the provision at FAR 52.204‐8:

(d) (1) The following representations or certifications in the System for Award Management (SAM) database are applicable to this solicitation as indicated:

(i) 252.209‐7003, Reserve Officer Training Corps and Military Recruiting on Campus‐‐Representation.

Applies to all solicitations with institutions of higher education.

(ii) 252.216‐7008, Economic Price Adjustment‐‐Wage Rates or Material Prices Controlled by a Foreign Government‐‐Representation. Applies to solicitations for fixed‐price supply and service contracts when the contract is to be performed wholly or in part in a foreign country, and a foreign government controls wage rates or material prices and may during contract performance impose a mandatory change in wages or prices of materials.

(iii) 252.222‐7007, Representation Regarding Combating Trafficking in persons, as prescribed in 222.1771.

Applies to solicitations with a value expected to exceed the simplified acquisition threshold.

(iv) 252.225‐7042, Authorization to Perform. Applies to all solicitations when performance will be wholly or in part in a foreign country.

(v) 252.225‐7049, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services—Representation. Applies to solicitations for the acquisition of commercial satellite services.

(vi) 252.225‐7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism. Applies to all solicitations expected to result in contracts of $150,000 or more.

(vii) 252.229‐7012, Tax Exemptions (Italy)‐‐Representation. Applies to solicitations when contract performance will be in Italy.

(viii) 252.229‐7013, Tax Exemptions (Spain)‐‐Representation. Applies to solicitations when contract performance will be in Spain.

(ix) 252.247‐7022, Representation of Extent of Transportation by Sea. Applies to all solicitations except those for direct purchase of ocean transportation services or those with an anticipated value at or below the simplified acquisition threshold.

(2) The following representations or certifications in SAM are applicable to this solicitation as indicated by the Contracting Officer; [Contracting Officer check as appropriate.] __ _ (i) 252.209‐7002, Disclosure of Ownership or Control by a Foreign Government.

__X _ (ii) 252.225‐7000, Buy American —Balance of Payments Program Certificate.

__ _ (iii) 252.225‐7020, Trade Agreements Certificate.

__ _ Use with Alternate I __ _ (iv) 252.225‐7031, Secondary Arab Boycott of Israel.

__ _ (v) 252.225‐7035, Buy American —Free Trade Agreements—Balance of Payments Program Certificate.

__ _ Use with Alternate I.

__ _ Use with Alternate II.

__ _ Use with Alternate III.

__ _ Use with Alternate IV.

__ _ Use with Alternate V.

(e) The offeror has completed the annual representations and certifications electronically via the SAM website at https://acquisition.gov/ . After reviewing the ORCA database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in FAR 52.204‐8© and paragraph (d) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer, and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by provision number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR/DFARS Provision# Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications located in the SAM database.

252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION

CONTROLS (OCT 2016)

(IAW DFARS 204.7304(a))

52.207-4 ECONOMIC PURCHASE QUANTITY--SUPPLIES (AUG 1987)

(IAW FAR 7.203)

(a) Offerors are invited to state an opinion on whether the quantity(ies) of supplies on which bids, proposals or quotes are requested in this solicitation is (are) economically advantageous to the Government.

(b) Each offeror who believes that acquisitions in different quantities would be more advantageous is invited to recommend an economic purchase quantity. If different quantities are recommended, a total and a unit price must be quoted for applicable items. An economic purchase quantity is that quantity at which a significant price break occurs. If there are significant price breaks at different quantity points, this information is desired as well.

OFFEROR RECOMMENDATIONS

ITEM QUANTITY QUOTATION PRICE TOTAL

52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY

OR A FELONY CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(IAW FAR 9.104-7(d))

(b) The Offeror represents that—

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

EVALUATION COST FACTOR FOR FIRST ARTICLE (OCT 1988)

(IAW FAR 9.306(i))

The cost to the Government for first article testing or engineering review and approval of first article test reports (where preliminary Contractor testing is required), as applicable, shall be a factor in the evaluation of this solicitation. The factor to be used in evaluation shall be

Lot/Item Evaluation cost

0001 $

(The above Clause/Provision has been modified.)

FIRST ARTICLE APPLICABILITY AND/OR CONDITIONS FOR WAIVER (FEB 2013)

(IAW FAR 9.306(c))

(a) First Article Testing is a requirement of this contract. This requirement may be waived by the Contracting Officer, if the bidder/offeror meets any one of the conditions for waiver listed below *** and in the instance of a prior contract, not more than __*__months have elapsed since the completion of that contract:

Lot/Item *Months Since Completion of Contract

0001 48

(b) Bidders who meet the conditions for waiver set forth below shall submit a bid or proposal on Bid/Offer "B" which does not require compliance with the First Article Approval provision set forth herein and furnish the following information in the individual solicitation: Contract No. __________________________, Contract Item No. _________, Date of Contract.

__________, Name & Address of Government Agency issuing the Contract. Failure to include this information will render the

IFB(s) non‐responsive and may cause rejection of RFP(s).

(c) Bidders/offerors who do not meet the conditions for waiver set forth below shall submit a bid on Bid/Offer, “A” which includes compliance with First Article Approval.

(d) Performance or other characteristics, which the First Article must meet, and detailed technical data requirements for testing of the First Article (including necessary data to be submitted in First Article Test Report, if applicable) are as set forth in this solicitation.

(e) The approved First Article ___**___ serve as a manufacturing standard.

Lot/Item **Serve as a Manufacturing Standard

0001 WILL NOT

(f) Waivers

Lot/Item ***Conditions for Waiver

0001 Previously furnished to prime contractor for delivery to Air Force

0001 Previously furnished to Air Force

52.211-14 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY

PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008)

(IAW FAR 11.604(a))

Note: DX or DO rating will be completed on cover page.

252.215-7013 SUPPLIES AND SERVICES PROVIDED BY NONTRADITIONAL DEFENSE

CONTRACTORS (JAN 2018)

(IAW DFARS 215.408(6))

52.217-3 EVALUATION EXCLUSIVE OF OPTIONS (APR 1984)

(IAW FAR 17.208(a))

52.217-5 EVALUATION OF OPTIONS (JUL 1990)

(IAW FAR 17.208(c))

THE FOLLOWING IS FILL‐IN DATA FOR PROVISION 52.204‐8 PARA (c)(2)(ii):

52.222‐18 CERTIFICATION REGARDING KNOWLEDGE OF CHILD LABOR FOR LISTED END PRODUCTS (Mar 2011)

(b) Listed End Products.

Listed End Product

Listed Countries of Origin

(c) Certification. The Government will not make award to an offeror unless the offeror, by checking the appropriate block, certifies to either paragraph (c)(1) or paragraph (c)(2) of this provision.

[ ] (1) The offeror will not supply any end product listed in paragraph (b) of this provision that was mined, produced, or manufactured in a corresponding country as listed for that end product.

[ ] (2) The offeror may supply an end product listed in paragraph (b) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture such end product. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor.

52.223-22 PUBLIC DISCLOSURE OF GREENHOUSE GAS EMISSIONS AND REDUCTION

GOALS--REPRESENTATION (DEC 2016)

(IAW FAR 23.804(b))

(b) Representation. [Offeror is to check applicable blocks in paragraphs (b)(1) and (2).]

(1) The Offeror (itself or through its immediate owner or highest‐level owner) [ ] does, [ ] does not publicly disclose greenhouse gas emissions, i.e., make available on a publicly accessible Web site the results of a greenhouse gas inventory, performed in accordance with an accounting standard with publicly available and consistently applied criteria, such as the Greenhouse Gas Protocol Corporate Standard.

(2) The Offeror (itself or through its immediate owner or highest‐level owner) [ ] does, [ ] does not publicly disclose a quantitative greenhouse gas emissions reduction goal, i.e., make available on a publicly available Web site a target to reduce absolute emissions or emissions intensity by a specific quantity or percentage.

(3) A publicly accessible Web site includes the Offeror's own Web site or a recognized, third‐party greenhouse gas emissions reporting program.

(c) If the Offeror checked “does” in paragraphs (b)(1) or (b)(2) of this provision, respectively, the Offeror shall provide the publicly accessible Web site(s) where greenhouse gas emissions and/or reduction goals are reported:__________.

52.225-18 PLACE OF MANUFACTURE (AUG 2018)

(IAW FAR 25.1101(f))

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly—

(1) [ ] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) [ ] Outside the United States.

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

(IAW FAR 52.107(a))

This solicitation incorporated one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The full text of a clause may be accessed electronically at this/these address(es): Regulations URLs: (Click on the appropriate regulation.)

http://farsite.hill.af.mil/reghtml/regs/far2afmcfa…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.