EDL_6920-01-422-6767WR_rev1.pdf_-__-_06-30-2016.pdf

ENGINEERING DATA LIST

DATE:

13 MAR 2015

REVISION: 6 *HISTORY*

CAGE:

15090

PAGE:

NSN:

6920014226767WR

DATA TECH:

McLeod, Keith E

END ITEM:

CATM-120C

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMACB/

MANUFACTURER NAME:

RAYTHEON COMPANY

REFERENCE NUMBER:

7006031-1

NOUN:

FIN,GUIDED MISSILE,

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 82577 7006031 C S E FIN ASSEMBLY - CATM McLeod, Keith E 13 MAR 2015

(-1) CONFIGURATION

NAME: DATE:

L 82577 7002065 S E LOCK ASSEMBLY

L 82577 7005512 A S E PIN - ATTACHMENT LOCK

L 82577 7005507 B S E NUT - SPANNER

L 82577 7005513 A S E NUT - ENGAGEMENT

L 82577 7005675 S E PIN - GROOVED

L 82577 7006032 B S E FIN

L 82577 7002066 S E LEVER - FIN LOCK

L 82577 7005505 A S E CAM

L 82577 7002067 S E HOUSING - CAM RETAINER

L 98752 200415485 C S A GENERAL ENGINEERING

NOTES

McLeod, Keith E 13 MAR 2015

NOTES 1, 3, 12 & 14 APPLY.

NAME: DATE:

STANDARD ENGINEERING TEXT

McLeod, Keith E 13 MAR 2015

SEE DRAWING 200415485 FOR GENERAL ENGINEERING NOTES.

FINISH: PER DRAWING.

SPARES CONFIG: PER DRAWING.

AUTHORIZATION TO RELEASE DATA WITH LIMITING DISTRIBUTION STATEMENTS WAS OBTAINED BY LETTER ON 9 FEBRUARY 2009.

NAME: DATE:

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 1EDL Version 6Generated by PRPS using Jasper Reports on 10 Mar 2016

NOTICE TO ACCOMPANY THE DISSEMINATION OF

EXPORT- CONTROLLED TECHNICAL DATA

If you print or display an abstract df any unclassified report marked EXPORT CONTROL, the following notice applies.

1. Export of information conta~ned herein, which includes, in some circumstances, release io foreign nationals within the United States, without first obtaining approval or license &om the Department of State for items controlled by the International Traffic in I

Arms Regulations (ITAR), or the Department of Commerce for items conkolled by the I

Export Administration Regulat~ons (EAR), may constitute a violation of law.

2. Under 22 U.S.C. 2778 the penalty for unlawful export of rtems or information I controlled under the ITAR is up to 2 years imprisonment, or a fine of $100,000, or both.

Under 50 U.S.C., Appendix 2410, tl~e penalty for unlawful export of items or informa-tion controlled under the EAR is a fine of up to $1,000,000, or five times the value of the exports, wl~~cl~ever is greater; or for an individual, imprisonment of up to 10 years, ;

or a fine of up to $250,000, or both. I

3. In accordance with your certification that establishes you as a "qualified U.S.

contractor," unauthorized dissemination of this information is prohibited and may result I

:,:I in disqualification as a qualified U.S. contractor, and may be considered in determining your eligibility for future conbcts with the Department of Defense.

4. The U.S. Government assumes no liability for direct patent infringement, or con-tributory patent inliingernent or misuse of technical data. ..

5. The U.S. Government does not warrant the adequacy, accuracy, currency, or completeness of the technical data.

6. The U.S. Govern~nent assumes no liability for loss, damaEe;or injury resulting from manufacture or use for any purpose of any product, article, system, or material in-volving reliance upon any or all technical d a ~ furnished in response to the request for technical data.

7. If the technical data fumjslled by the Government will be used for commercial lnanufac tu~g or other profit potential, a hcense for such use may be necessary. Any payments made in support of the request for data do not include or involve any license rights.

8. A copy of this notice shall be provided with any partial or complete reproduction of these data that are provided to qualified U.S. contractors.

10 U.S.C. 140c @OD Directive 5230.25 (Encl5)