DD158.pdf

AFMC 158 Generated By PRPS Using Oracle Reports Page of1 1

FD20601300261-00 1

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: VERSION:

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER

BASES). WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT:

CODED DATA:

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

Please ignore the displayed/selected AFMCFARS Clauses. The AFMCFARS clauses are no longer valid. The included Vendor Instructions attachment should be referenced instead and supersedes the AFMCFARS Clauses.

PHONE NUMBER: DATE: ORGANIZATION / OFFICE SYMBOL: PACKAGING SPECIALIST:

406 SCMS / GUMACB Martinez, Lorenda L

12321 - 16 NOV 2012

MIL-STD 129 REVISION: P MIL-STD 2073 REVISION: E

PRESERVATION LEVEL: PACKING LEVEL: SPI: SPI REV: SPI DATE:

ITEM(S):

4320013591060JX

QUP ICQ PRES

METH

CD PRES

MTL

WRAP

MTL

CUSH

DUNN

CT UNIT

CONT

INT

CONT

UCL SPEC

MKG

UNIT

PACK

WEIGHT

UNIT

PACK

LENGTH

UNIT

PACK

WIDTH

UNIT

PACK

DEPTH

UNIT

PACK

CUBE

OPI

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

APPLICABLE FAR CLAUSES:

.00 .0 .0 .0 .000

478-327-6313 / 497-6313

AFMC FARS 5352.247-9005 Shipping Container Marking

AFMC FARS 5352.247-9007 Specification Commercial Packaging

SIGNATURE:

//SIGNED// Martinez, Lorenda L

MILSpecification Commercial Packaging (ASTM-D-3951)AAA

Vendor Packaging Instructions

X Shipping Container Marking.

Shipping containers shall be marked meeting the following criteria:

(a) MIL-STD-129 REV 4, Standard Practice for Military Marking.

(b) Bar code format shall conform to bar code symbology Format 3 of 9, Code 39 as specified in

MIL-STD-129 REV 4.

(c) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 REV 4, e.g., unit serial numbers, original equipment manufacturer's (OEM) name, or OEM model number, as specified on the AFMC Form 158.

Marking of Warranted Items.

The contractor shall mark the items or otherwise furnish notice with the items to show the existence of the warranty; its substance and duration; and the name, address, and telephone number of the person to notify if the items are defective in accordance with FAR 46.706(b)(5), Warranty Terms and Conditions.

X Specification Commercial Packaging (ASTM D3951). (For Packing)

(a) Items shall be packaged in accordance with American Society for Testing and Materials (ASTM) Specification D3951-98, Standard Practice for Commercial Packaging. Individual shipments exceeding 150 pounds, 108 inches in length, or 130 inches in girth plus length shall be packaged on skidded crates or palletized to allow handling by forklift.

(b) The exterior container shall be marked (readable from 24 inches): “ASTM D3951 - NOT

FOR OUTSIDE STORAGE.”

X Military Packaging and Marking. (For Preservation)

Items shall be packaged in accordance with MIL-STD-2073-1 D, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129 REV 4, Standard Practice for Military Marking.

Engineered or Specialized Containers (CDRS).

a) Existing containers or designs already in the DoD inventory shall be evaluated for use or adaptation prior to the development of new containers (MIL-STD-2073-1D, Standard Practice for Military Packaging). Modification of existing containers or designs are an acceptable alternative to new containers when approved by the Government. The Contractor’s recommendation shall be based on information received from queries using DI-PACK-80683 (packaging specialists fills in current edition), Container Design and Retrieval System (CDRS) Search Request

(b) Air Force acceptance of proposed new engineered or specialized containers shall be by https://www.afmc-mil.wpafb.af.mil/pdl/afmcforms/afmc/mc015800.xfdl http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/46.htm#P287_44189 written notice from the Contracting Officer and identify each container accepted. Considerations for acceptance include life-cycle cost, capability to interface with DoD distribution systems (storage and transportation), ability to meet operational requirements, and qualification testing requirements.

(c) When accepted, the Contractor shall comply with DI-PACK-80684 (packaging specialists fills in current edition), Container Design and Retrieval System (CDRS) Data Input.

Packaging and Marking of Hazardous Material.

Hazardous materials shall be prepared for shipment in accordance with the following applicable regulations for the individual shipment hazard, ultimate destination, and mode of transportation:

(a) Code of Federal Regulations (CFR) Title 29, Part 1910.1200;

(b) Code of Federal Regulations (CFR) Title 49;

(c) Air Force Manual (AFMAN) 24-204_IP, Preparing Hazardous Materials for Military Air Shipment;

(d) International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air; and

(e) International Maritime Dangerous Goods (IMDG) Code.

__ Packaging Data (Coded and/or Special Packaging Instructions).

The Contractor shall provide packaging data in accordance with DD Form 2326, Preservation and Packing Data, and/or DD Form 2169, Special Packaging Instructions. MIL-STD-2073-1 D, Standard Practice for Military Packaging, identifies the applicable data elements. DI-PACK- 80120 (packaging specialists fills in current edition), Preservation and Packing Data, and DI- PACK-80121(packaging specialists fills in current edition), Special Packaging Instructions, apply.

http://www.dtic.mil/whs/directives/infomgt/forms/eforms/dd2326.pdf http://www.dtic.mil/whs/directives/infomgt/forms/eforms/dd2169.pdf