AFMC_Form158_Packaging_Instructions.pdf

UNIT PACK WEIGHT UNIT PACK SIZE

Since this is a repair contract, see paragraph 4.8 of MIL-STD-2073-1D for packaging of excess government property. When shipping containers are received that meet the requirements of this form and are suitable for return shipment of serviceable assets, they shall be reclaimed, stored and protected for reuse. Unserviceable containers shall be disposed of and replaced with new containers that meet these requirements. SEE ATTACHMENT IN APRS' FOR VENDOR'S PACKAGING INSTRUCTIONS.

3. INSTRUCTIONS TO CONTRACTING OFFICER: Insert appropriate clause(s) into Section D for applicable item(s) as indicated below.

U C L

AFMC FORM 158, 20090727

PACKAGING REQUIREMENTS

PR, MIPR, OR DOCUMENT

AFMC FARS 5352.247-9005, SHIPPING CONTAINER MARKING.

NAME(s) OR NSN/MMAC

FD2060-11-35014

1. PACKAGING REQUIREMENTS: Block 1 shall always be completed and further defined in Blocks 2, 3, or 4. The term "Item ID" refers to line item number, item name, NSN/MMAC, part number, or any other way of identifying a particular item. MIL-STD-2073-1 represents Military Preservation (PRES) and Packing (PACK). Military packing consists of levels A, B, and Minimum (M). ASTM D3951 could be substituted by another document if specified in Block 2. Quantity Per Unit (QUP) and Commercial Best Practice (CBP) are abbreviated. The reverse side of this form has the European Union environmental requirements.

ITEM ID

QUP

PRES

MIL-STD-2073-1

COMMERCIAL

ASTM D3951

PACK PRES PACK

CBP

SPECIAL PACKAGING

INSTRUCTION

NUMBER

(X) (X) (X)(X)(#) (A/B/M)

6130-01-370-4149KV 1

2. ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS (Specify all revisions and dates of required specifications)

B

6130-01-447-6922KV 1 B F014476922 REV A DTD 05293

4. CODED DATA: Coded requirements shall be interpreted in accordance with MIL-STD-2073-1

QUANTITY

QUP ICQ

PRES

METH

C D

PRES

MTL

WRAP

MTL

CUSH

DUNN

C T

UNIT

CONT

INT

CONT

SPEC

MKG 10

UNIT PACK CUBE

LENGTH 10 WIDTH 10 DEPTH 10 WHOLE CUBE 1000TH

O P I

AFMCFARS 5352.247-9006, MARKING OF WARRANTED ITEMS.

ITEM NAME(s) OR NSN/MMAC

AFMCFARS 5352.247-9007, SPECIFICATION COMMERCIAL

PACKAGING (ASTM D3951). ITEM NAME(s) OR NSN/MMAC

AFMCFARS 5352.247-9008, CONTRACTOR COMMERCIAL

PACKAGING (Commercial Best Practice). ITEM NAME(s) OR

NSN/MMAC.

AFMCFARS 5352.247-9009, MILITARY PACKAGING AND MARKING.

ITEM NAME(s) OR NSN/MMAC

AFMCFARS 5352.247-9010, ENGINEERED OR SPECIALIZED

CONTAINERS (CDRS). ITEM NAME(s) OR NSN/MMAC

AFMCFARS 5352.247-9013, PACKAGING DATA (Coded and/or/Special Packaging Instructions). ITEM NAME(s) OR NSN/MMAC

AFMCFARS 5352.247-9011, PACKAGING AND MARKING OF

HAZARDOUS MATERIAL. ITEM NAME(s) OR NSN/MMAC

406 SCMS/GUMA

PACKAGING SPECIALIST (Typed Name)

//SIGNED*//CHERYL MUNT/497-6309

PACKAGING SPECIALIST SIGNATURE

PREVIOUS EDITION IS OBSOLETE

DATE

SEE REVERSE SIDE

20110804

ORGANIZATION

AFMC FORM 158, 20090727

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS – IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES, SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP) OR OTHER

BASES).

WOODEN LUMBER, WOODEN PALLET, AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF “INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), “REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE.”

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKING MATERIAL FOR INTERNATIONAL TRADE

REQUIREMENTS, USE THE LATEST REVISION OF (ISPM NO. 15)