FD20201801645_RQRs.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

REPAIR QUALIFICATION REQUIREMENTS

NSN: 6105-01-573-5924

P/N: 495855-001 Noun: Control Motor Application: DMSP

2 Feb 2017 Section C 1/3

SECTION C:

1. QUALIFICATION REQUIREMENTS THAT MUST BE SATISFIED TO BECOME A QUALIFIED SOURCE

a. Prequalification Notice: The offeror shall notify the appropriate government Small Business Office or, if responding to a solicitation, the contracting officer in the appropriate government contracting office, of intent to qualify as a source for this Control Motor.

b. Facilities, Testing, and Inspection Capabilities: The offeror must certify to the government that they have, or have access to, the required facilities and equipment to repair, inspect, test, package, and store the item. The offeror shall make their facilities, equipment, tooling, and personnel available for evaluation and inspection by the government.

c. Data Verification: The offeror must verify that they have a complete data package. This verification must include a complete list of all procedures, drawings, and specifications, including change notices, in the offeror’s possession including, at a minimum Viasat (1Q601) drawing 495855-001. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

d. Repair Process Verification: The offeror must repair this item to conform to the government requirements as prescribed within the ESA-approved engineering/technical data package. The offeror must show compliance with Unique Identification (UID) requirements in accordance with DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 415SCMS. The offeror shall also identify its sources for materials and its standards for internally used processes.

e. Test and Evaluation and/or Verification: The offeror, at their own expense, shall prepare and submit to 415SCMS for their prior approval, a qualification test plan/procedure detailing how they intend to verify compliance with all performance, environmental, mechanical, and quality assurance requirements identified by Drawing 495855-001.

f. Qualification Article Verification: The offeror must provide, at their own expense, a pre-contract award qualification article for evaluation by the government. This article must comply with all of the requirements of Drawing 495855-001.. This article shall be subjected to a form, fit, and function evaluation to demonstrate compatibility with the weapon system and to evaluate the repair capability of the offeror. Offerors will be notified whether or not their qualification article passed or failed the required qualification testing within 120 days of submitting a product for qualification testing. Note that successful completion of the qualification testing does not guarantee any contract award. If the offeror is deemed qualified and awarded the contract, a post-contract award first article exhibit may be required to verify production capability.

P/N: 495855-001

2 Feb 2017 Section C 2/3

g. Qualification Requirement Cost Estimate: Estimated likely costs for testing and evaluation, which will be incurred by the potential offering party to become qualified are $0.00.

h. Qualification Time Completion Estimate: It is the estimate of the engineering support activity that completion of this qualification effort should require 120 days. This is based on complexity of the Control Motor and other factors.

i. Qualification Time Limitation: An offeror may not be denied the opportunity to submit and have considered an offer for a contract if the offeror can demonstrate to the satisfaction of the contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed to provide the vendor with an opportunity to demonstrate its ability to meet the standards specified in this qualification requirement.

j. Evaluation of Proposals Not Previously Qualified: The offeror must be fully qualified in order to be eligible for a contract award. Therefore, the offeror must fulfill all of the requirements stated, in writing, in the qualification requirement before the date specified for award of the contract. Once all requirements are met, the offeror will be listed as an approved repair source for this item. Approval, however, does not guarantee subsequent contract award.

P/N: 495855-001

2 Feb 2017 Section C 3/3

2. SOURCE QUALIFICATION WAIVER REQUIREMENTS

Sources who meet any of the following Source Qualification Waiver Criteria (QWC) may apply for a waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify production capability:

a. QWC1: The potential source submits written certification that the articles have been supplied to the government or original equipment manufacturer (e.g., DD Form 250, Material Inspection and Receiving Report, Purchase Order invoice, etc).

b. QWC2: The potential source is qualified on the right-hand article and requests to be qualified on the left-hand article. If the right-and left-hand articles are mirror images of each other, then approval can generally be given.

c. QWC3: A source qualified to provide an assembly is usually qualified to provide subassemblies, major components, and items of that assembly.

d. QWC4: A source qualified to provide earlier dash numbers of a basic P/N may be qualified to provide other dash numbers of that same basic P/N, provided there is no increase in complexity, criticality, or other relevant requirements.

e. QWC5: A source qualified to provide a similar or like item can be qualified to provide the required item. However, for approval, the engineering authority must verify that there is no increase in complexity, criticality, or other requirements over that of the similar item. At a minimum, the source shall provide a complete set of drawings for the similar item and written proof, such as purchase orders, shipping documents, etc., to show that the similar item was provided to the original equipment manufacturer or DoD.

f. QWC6: A source previously qualified to provide an item, but which has been purchased, sold, merged, absorbed, reformed, split, etc., may qualify if it can be established that the qualification is currently with the requester and that the requester has the same or equivalent facilities, tooling, equipment, personnel, and utilizes the original forging, castings, etc., in the repair process.

NSN: 6105-01-598-5629

P/N: JTE133610-1

Noun: Motor/Drive Assembly Application: AN/TSQ-T10

28 Jun 2017 Section C 1/3 contracting office, of intent to qualify as a source for this Motor/Drive Assembly.

including change notices, in the offeror’s possession including, at a minimum ROTATING PRECISION MECHANISMS, INC. (CAGE 54547) drawing JTE133610. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 415 SCMS/GUMBB. The offeror shall also identify its sources for materials and its standards for internally used processes.

submit to 415 SCMS/GUMBB for their prior approval, a qualification test plan/procedure detailing how they intend to verify compliance with all performance, environmental, mechanical, and quality assurance requirements identified by Drawing JTE133610.

f. Qualification Article Verification: N/A that completion of this qualification effort should require 90 days. This is based on complexity of the Motor/Drive Assembly and other factors.

P/N: JTE133610-1

28 Jun 2017 Section C 2/3 contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed

P/N: JTE133610-1

28 Jun 2017 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 6110-01-598-6904 FD

P/N: JTE133675-1

Noun: Controller Assembly

22 May 2017 Section C 2/4 contracting office, of intent to qualify as a source for this Controller Assembly.

including change notices, in the offeror’s possession including, at a minimum Rotating Precision Mechanisms Inc. (CAGE 54547) drawing JTE133675. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the mechanical, and quality assurance requirements identified by Drawing JTE133675.

that completion of this qualification effort should require 135 days. This is based on complexity of the Controller Assembly and other factors.

P/N: JTE133675-1

22 May 2017 Section C 3/4

P/N: JTE133675-1

22 May 2017 Section C 4/4 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 6125-00-838-7075ZA

P/N: 2016817-0501 or PM66194221 Noun: Phase Shifter Assembly Application: AN/FPS-85(V), Space Control Sensors (SCS) Eglin Radar

20 Nov 2017 Section C 1/3 contracting office, of intent to qualify as a source for this Phase Shifter Assembly.

including change notices, in the offeror’s possession including, at a minimum Raytheon Company (CAGE 06845) drawing 2016817-0501 or Padgett Machine Shop (CAGE 6W037) drawing 2016817-0501 or drawing PM66194221. The offeror may also be required to produce

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 415 SCMS/GUMAD. The offeror shall also identify its sources for materials and its standards for internally used processes.

submit to 415 SCMS/GUMAD for their prior approval, a qualification test plan/procedure mechanical, and quality assurance requirements identified by Drawing 2016817-0501 or

PM66194221.

that completion of this qualification effort should require 60 days. This is based on complexity of the Phase Shifter Assembly and other factors.

P/N: 2016817-0501 or PM66194221

20 Nov 2017 Section C 2/3 contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed

P/N: 2016817-0501 or PM66194221

20 Nov 2017 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 5895-01-097-3051

P/N: 654VE4840-1 or DSR-1318 or ASN-103XAL-71 Noun: Synthesizer, Electrical Frequency Application: AN/MST-T1A MUTES

9 May 2019 Section C 1/3 contracting office, of intent to qualify as a source for this Synthesizer, Electrical Frequency.

personnel available for evaluation and inspection by the government. The offeror must certify to the government that they have, or have access to, equipment to verify the electrical characteristics detailed in drawing 654VE4840.

including change notices, in the offeror’s possession including, at a minimum General Dynamics (81755) drawing 654VE4840. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the mechanical, and quality assurance requirements identified by Drawing 654VE4840. After completion of the approved qualification testing, the offeror shall be required to submit a complete test report of the results to 415 SCMS/GUMBB for their review and approval prior to the contract award. The government retains the right to exercise the option to inspect the testing processes, including on-site witnessing of any or all documented testing. To allow accomplishing this, the offeror shall notify the government at least 30 days in advance of the occurrence of any testing that will be used as a basis for qualification. The offeror’s facilities shall be made available for government inspection during these tests.

f. Qualification Article Verification: The offeror must provide, at their own expense, a pre-contract

P/N: 654VE4840-1 or DSR-1318 or ASN-103XAL-71

9 May 2019 Section C 2/3 of the requirements of Drawing 654VE4840. This article shall be subjected to a form, fit, and function evaluation to demonstrate compatibility with the weapon system and to evaluate the repair capability of the offeror. Offerors will be notified whether or not their qualification article passed or failed the required qualification testing within 30 days of submitting a product for qualification testing. Note that successful completion of the qualification testing does not which will be incurred by the potential offering party to become qualified are $0.

of the Synthesizer, Electrical Frequency and other factors.

contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed

P/N: 654VE4840-1 or DSR-1318 or ASN-103XAL-71

9 May 2019 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 5985-01-036-5713

P/N: 600777-01 Noun: Antenna Subassembly

8 Mar 2017 Section C 1/3 contracting office, of intent to qualify as a source for this Antenna Subassembly.

including change notices, in the offeror’s possession including, at a minimum Microwave Instrumentation Technology (CAGE 1CDY6) drawing 600777. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 415 SCMS. The offeror shall also identify its sources submit to 415 SCMS for their prior approval, a qualification test plan/procedure detailing how assurance requirements identified by Drawing 600777.

f. Qualification Article Verification: The offeror must provide, at their own expense, a pre-contract of the requirements of Drawing 600777. This article shall be subjected to a form, fit, and function evaluation to demonstrate compatibility with the weapon system and to evaluate the repair capability of the offeror. Offerors will be notified whether or not their qualification article passed or failed the required qualification testing within 60 days of submitting a product for qualification testing. Note that successful completion of the qualification testing does not

P/N: 600777-01

8 Mar 2017 Section C 2/3 of the Antenna Subassembly and other factors.

contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed

P/N: 600777-01

8 Mar 2017 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 5996-01-454-4605ZA

P/N: DB060685-2 or 9477861-01 Noun: Trigger Pulse Amplifier Application: AN/FPS-85, Eglin, Space Control Sensor (SCS)

12 Aug 2019 Section C 1/3 contracting office, of intent to qualify as a source for this Trigger Pulse Amplifier.

including change notices, in the offeror’s possession including, at a minimum Comtech Pst Corp.

(CAGE 31196) drawings 9477861-01 (CAGE 98749) 9477860 and related drawings. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the mechanical, and quality assurance requirements identified by the ESA-approved engineering data package.

of the Trigger Pulse Amplifier and other factors.

P/N: DB060685-2 or 9477861-01

12 Aug 2019 Section C 2/3 contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed

P/N: DB060685-2 or 9477861-01

12 Aug 2019 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 6130-01-082-9944

P/N: 654E4135-1 Noun: High Voltage Power Supply Assembly

5 Jul 2017 Section C 2/4 contracting office, of intent to qualify as a source for this High Voltage Power Supply Assembly.

including change notices, in the offeror’s possession, and also including all relevant supplier data, which includes a full data package of supplier data plus relevant installation and user manuals and data sheets. The offeror may also be required to produce copies of all applicable

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the mechanical, and quality assurance requirements.

f. Qualification Requirement Cost Estimate: Estimated likely costs for testing and evaluation,

g. Qualification Time Completion Estimate: It is the estimate of the engineering support activity that completion of this qualification effort should require 30 days. This is based on complexity of the High Voltage Power Supply Assembly and other factors.

h. Qualification Time Limitation: An offeror may not be denied the opportunity to submit and have

P/N: 654E4135-1

5 Jul 2017 Section C 3/4

i. Evaluation of Proposals Not Previously Qualified: The offeror must be fully qualified in order to

P/N: 654E4135-1

5 Jul 2017 Section C 4/4 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 5985-01-078-4682

P/N: 626Z1117-3 Noun: Rotary Joint, Single Channel

15 Dec 2016 Section C 2/4 contracting office, of intent to qualify as a source for this Rotary Joint, Single Channel.

including change notices, in the offeror’s possession, and also including all relevant supplier data, which includes a full data package of supplier data plus relevant installation and user manuals and data sheets. The offeror may also be required to produce copies of all applicable

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the mechanical, and quality assurance requirements.

of the Rotary Joint, Single Channel and other factors.

P/N: 626Z1117-3

15 Dec 2016 Section C 3/4

P/N: 626Z1117-3

15 Dec 2016 Section C 4/4 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NIIN: 3010013268932FD

P/N: 500-007059 Noun: Gear Assembly, Speed Decreaser Application: AN/MST-T1A, MUTES

24 Sep 2019 Section C 1/3 contracting office, of intent to qualify as a source for this Gear Assembly, Speed Decreaser.

including change notices, in the offeror’s possession including, at a minimum Gear Works (50867) drawing 500-007059, TO 31R2-4-950-4, and any documents referenced herein. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by AFMC 415 SCMS/GUMBB. The offeror shall also identify its sources for materials and its standards for internally used processes submit to AFMC 415 SCMS/GUMBB for their prior approval, a qualification test plan/procedure mechanical, and quality assurance requirements identified by Drawing 500-007059.

that completion of this qualification effort should require 180 days. This is based on complexity of the Gear Assembly, Speed Decreaser and other factors.

P/N: 500-007059

24 Sep 2019 Section C 2/3

P/N: 500-007059

24 Sep 2019 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify

a. QWC1: The potential source submits written certification that the articles have been repaired for the government or original equipment manufacturer (e.g., DD Form 250, Material Inspection

c. QWC3: A source qualified to repair an assembly is usually qualified to provide subassemblies,

d. QWC4: A source qualified to repair earlier dash numbers of a basic P/N may be qualified to

e. QWC5: A source qualified to repair a similar or like item can be qualified to provide the required item. However, for approval, the engineering authority must verify that there is no increase in complexity, criticality, or other requirements over that of the similar item. At a minimum, the source shall provide a complete set of drawings for the similar item and written proof, such as purchase orders, shipping documents, etc., to show that the similar item was provided to the original equipment manufacturer or DoD.

f. QWC6: A source previously qualified to repair an item, but which has been purchased, sold, NSN: 5895-01-097-6191

P/N: 654VE4840-4

Noun: Electrical Frequency Synthesizer

18 Nov 2015 Section C 2/4 contracting office, of intent to qualify as a source for this Electrical Frequency Synthesizer.

including change notices, in the offeror’s possession and also including all relevant supplier data, which includes a full data package of supplier data plus relevant installation and user manuals and data sheets. The offeror may also be required to produce copies of all applicable

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the detailing how they intend to verify compliance with all performance, mechanical, and quality assurance requirements.

of the Electrical Frequency Synthesizer and other factors.

P/N: 654VE4840-4

18 Nov 2015 Section C 3/4

P/N: 654VE4840-4

18 Nov 2015 Section C 4/4 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 5996-01-530-0722GO

P/N: HPADPA172182

Noun: Driver Amplifier ERU Application: AN/FRC-178 (V) 1, 2,3,4 Global Positioning System (GPS)

12 Aug 2019 Section C 1/3 contracting office, of intent to qualify as a source for this Driver Amplifier ERU.

including change notices, in the offeror’s possession including, at a minimum General Microwave Corporation (CAGE: 11332) and related drawings. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the mechanical, and quality assurance requirements identified by the ESA-approved engineering data package.

of the Driver Amplifier ERU and other factors.

P/N: HPADPA172182

12 Aug 2019 Section C 2/3 contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed

P/N: HPADPA172182

12 Aug 2019 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 6130-01-369-3391VE

P/N: HS12-C1023 or 177877-101 Noun: Power Supply Application: SBIRS AN/2GKC1

7 Nov 2017 Section C 1/3 contracting office, of intent to qualify as a source for this Power Supply.

including change notices, in the offeror’s possession, and also include all relevant supplier data, which includes a full data package of supplier data plus relevant installation and user manuals and data sheets. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications for the Power Supply.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 415 SCMS. The offeror shall also identify its sources submit to 415 SCMS for their prior approval, a qualification test plan/procedure detailing how assurance requirements.

of the Power Supply and other factors.

P/N: HS12-C1023 or 177877-101

7 Nov 2017 Section C 2/3 contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed

P/N: HS12-C1023 or 177877-101

7 Nov 2017 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 5985010815826

P/N: 349D821G01 Noun: Reflector, Antenna Application: AN/TPS-75 Radar

11 Sep 2019 Section C 1/3 contracting office, of intent to qualify as a source for this Reflector, Antenna.

they have, or have access to, the required facilities and equipment to repair, inspect, test using an AN/TPS-75 transmitter or equivalent, package, and store the item. For the antenna, the vendor shall have an access to IEEE-149 compliant test range. The offeror shall make their facilities, equipment, tooling, and personnel available for evaluation and inspection by the government.

including change notices, in the offeror’s possession including, at a minimum Northop Grumm (CAGE 97942) drawing 349D821, USAF Technical Order 31P3-2TPS75-4 and associated documents. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 415 SCMS/GUMBB.The offeror shall also identify its mechanical, and quality assurance requirements identified by Technical Order 31P3-2TPS75-2-2, table 6-27 which requires in system testing to verify correct function of the Reflector Antenna.

f. Qualification Time Completion Estimate: It is the estimate of the engineering support activity that completion of this qualification effort should require 30 days.This is based on complexity of the Reflector, Antenna and other factors.

g. Qualification Time Limitation: An offeror may not be denied the opportunity to submit and have

P/N: 349D821G01

11 Sep 2019 Section C 2/3

h. Evaluation of Proposals Not Previously Qualified: The offeror must be fully qualified in order to

P/N: 349D821G01

11 Sep 2019 Section C 3/3 waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify minimum, the source shall provide a complete set of drawings for the similar item and written

NSN: 3020-01-598-9451

P/N: 134010-1 Noun: Motor/Tach/Brake/Pinion Assembly Application: AN/TSQ-T10 Joint Threat Emitter

28 Jan 2019 Section C 1/3 contracting office, of intent to qualify as a source for this Motor/Tach/Brake/Pinion Assembly.

including change notices, in the offeror’s possession including, at a minimum Rotating Precision Mechanism Inc., (CAGE: 54547) drawing 134010-1. The offeror may also be required to produce

DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 415 SCMS/ GUMBB. The offeror shall also identify submit to 415 SCMS/ GUMBB for their prior approval, a qualification test plan/procedure mechanical, and quality assurance requirements identified by Drawing 134010-1.

which will be incurred by the potential offering party to become qualified are $0.

that completion of this qualification effort should require 45 days. This is based on complexity of the Motor/Tach/Brake/Pinion Assembly and other factors.

NSN: 3020-01-598-9451

P/N: 134010-1 Noun: Motor/Tach/Brake/Pinion Assembly Application: AN/TSQ-T10 Joint Threat Emitter

28 Jan 2019 Section C 2/3

i. Evaluation of Proposals Not P