12363 - EL Updated.docx
DOCX document 25 KB Posted
- Attached to
- Solicitation: Test Frame Purchase Federal contract opportunity
- Solicitation number
- FA822824Q0023
About this file
This document is a description and specifications for a government contract opportunity to purchase a Test Frame for a new workload.
The key details are:
- The 526 EMXS will be repairing and testing a new workload from the Army, and this procurement adds components to an existing test frame to enable testing of engines and generators simultaneously.
- The required items include a diesel radiator, exhaust kit, rain cap, clamps, roof panels, labor, and other accessories to assemble a complete test frame to support 1 test position.
- The contractor shall deliver the items to the specified address at Hill AFB in Utah.
- The contractor shall provide the same warranty to the government as they provide to commercial customers.
- This opportunity is a Solicitation (FA822824Q0023) issued by the Department of the Air Force Materiel Command Air Force Sustainment Center to purchase 1 each Test Frame.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - FA822824Q0023.pdf | ||
| 12363 - Solicitation Instructions.docx | DOCX document | |
| 12363 - EL.docx | DOCX document | |
| 12363 - SSJ - Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Description and Specifications 526 EMXS “A” Model Conversion Scope:
The 526 EMXS will be repairing and testing a new workload from the Army. We currently do not have the capability to test the engines and generators at the same time, so this procurement adds components to the necessary frame. The shop can then utilize this frame to drop in engines and generators, attach to a load bank, and complete testing on the following asset:
NSN: 6115-01-686-9282
Part Number: 17-61221 Noun: Diesel Engine Generator Set Tech Data: TM 5-6115-783-23P
| NOMENCLATURE |
| PART NUMBER |
| QTY |
1. “A” Model Conversion to accept “D” Model engine-generator, cooling system, accessories, and exhaust system. This includes the following items required to assemble a Test Frame to support 1 each test position.
· Diesel Radiator, Complete Cooling System, as required to support a single test position configuration.
· Bergari Solutions, Exhaust Kit, CS Accessories Elbow/Flex, as required to support a single test position configuration.
· Blanket: Elbow/, as required to support a single test position configuration.
· Miratech Winnipeg Cowl TS-Series, Critical, as required to support a single test position configuration.
· 8 inch Carbon Steel Raincap, as required to support a single test position configuration.
· Diesel Equipment Donaldson Band clamp 5 inch, as required to support a single test position configuration.
· X007784 Donaldson Band clamp 4 inch, as required to support a single test position configuration.
· Roof Panels as needed per PPU, as required to support a single test configuration.
· Labor/IPS/TAW, as required to support a single test configuration.
| N/A |
| 1 |
2. The contractor shall deliver the items to the following address located at (HAFB).
ATTN: Jason Martinez (801)-586-6390 5832 H Ave Bldg 843 Bay L, Hill AFB, UT 84056
3. Warranty: The contractor shall provide the same warranty to the government that they provide to commercial customers.
File details come from the government source that posted it. Updated .